I Built My Dream RX7! 🎉

Greased Wheels
6 followers
9 Video Views·Oct 20, 2022
It's go time, this is not a drill.
We've got two weeks left to build my dream RX-7.
We have tons of parts going in.
We're going from the stock twins to a big single,
the BorgWarner 7670.
We've also got a full fuel system going in.
We're talking fuel pump, injectors, fuel rails.
We're going full standalone.
We're talking a Haltech Elite 2500 with the IC7 display
and tons of other supporting mods.
Goals today, we're pulling the motor.
It's easier to do turbo work with the engine out,
so we're gonna pull the motor.
We're gonna do some cleaning on the engine
and the engine bay itself.
We're gonna check for rust,
assess any areas that we need to,
get the bumper off for paint,
assemble the turbo setup,
and simplify all the wiring, vacuum lines, et cetera.
Get the motor back in and first start up.
Guess what?
Guess what we're in today?
We're in the Honda CR-V.
I am on my own for the first time in a long time
with my kids.
I just dropped them off
because we got things to do.
Mega progress happening on the RX-7
because as you guys know,
it has to be done by the end of this month.
Also, you might notice I got this thing on my hand.
And that's because I went and did a Spartan race
this last weekend.
All things went well.
It went according to plan
with the exception of absolutely tearing my hand apart.
One of my calluses completely ripped off here on the bottom
and then a little bit here on top as well.
If you're squeamish, look away now.
I'll put a picture up on the screen.
Boys, what's up?
Oh, hello.
Hi, it's so good to see you.
So guys, Ryan and Jamie are absolutely crushing it.
We've made some insane progress.
And when I say we, I really mean them.
I literally just came to look at it.
I guess the process from here,
we're gonna pull the motor, right?
Because it's easier to do the turbo work
with the motor out.
So out of everything that we pulled out,
all of this is trash essentially.
And we're using this.
And here's the turbo.
Look at this comparison.
That from that.
Dude, those are babies.
I don't think I realized how small those are.
Dude, that's tiny.
It's about average.
Also, I just wanna take a moment to just acknowledge
the absolute confidence in these guys
to tear apart a car to this level right behind these.
Like, you guys are boxed in.
This is like, this is the door.
Nothing is moving in or out of this shop
until something happens with this.
The confidence.
Man, what happened?
I'm not undoing the clutch.
Oh my gosh.
This is not going to end well for me.
This is not gonna end well for you, no.
Where did this bandaid come from?
I mean, it's fitting.
It's not a good shop,
but let's get the biggest bandaid we possibly have.
I was looking around.
I'm like, there's gotta be a smaller one.
Nope, that's the one.
That's it, that's the one.
Guys, Ryan's my absolute hero.
Look at him under there.
He's putting in the work.
We are getting so close.
It's at this point where things start
to get really frustrating,
but you notice Ryan is cool as a cucumber right now.
Let's go, boys.
Let's go.
She's free.
Here we go.
She's out.
Look at that.
Freedom!
I'm free.
Look, I'm helping.
I love it.
Look at that little baby, 1.3 liter, two rotors.
She's free.
Also, fantastic news.
We noticed that this engine is literally brand new.
This is a crate motor from Mazda.
The car literally has, I think, like 45,000 miles on it.
This engine is brand new.
It's a boy!
Aw, look at it.
Ryan even cut the umbilical cord himself.
You're the daddy now.
Wait, does that make me the mom?
You're the mom.
I don't got a mom.
♪ All day, all night ♪
It's just as I suspected.
I have absolutely no idea what I'm doing,
but fortunately, all these guys do.
Then, of course, we've got the hero piece here,
the BorgWarner 7670.
I am so stoked to see what this turbo can do.
I think on E85, we should be able to hit
north of 400 wheel horsepower.
We've also got this gnarly heat shield on here
to hopefully help keep temps down,
because unfortunately, the intake manifold
sits right here next to it,
so it's a little bit of a conflicting issue,
but that heat shield should help a ton.
So this has turned into quite the cluster of projects.
There's so many different things going on.
We did assess a little bit of rust right down here.
Basically, this whole frame rail from back
behind this pulley all the way down
and kind of a little bit on the inside.
So we sanded it down as best as we could
and then hit it with a little bit of paint.
And speaking of paint, the aesthetic of this
is just going absolutely swimmingly.
We got all this stuff cleaned up, powder coated.
It's got a clear over it.
We just kind of retained that silver look.
I like that because it looks clean.
Jamie's got the intake manifold here.
It just looks so much better.
All the dirt and grime got cleaned off,
and then, of course, we cleared it so it stays protected.
This is one of the fuel rails sitting down here.
Ryan's working on the other fuel rail,
which is gonna go right here on this inside edge.
We're gonna be running a set of 1050cc injectors,
primary and 1700cc secondary injectors,
along with a massive fuel pump in the back,
so we should have plenty of fueling power for the E85.
Also, the Haltech install is in full swing here.
We're already going through all the wiring,
trying to delete everything
that just doesn't need to be there anymore.
We've got the IC7 here,
which I think we're gonna be able to mount right along here.
It's literally, it's the perfect spot for it.
It's gonna sit right where the radio spot is,
and I was telling these guys,
it's like, it sounds kind of elitist,
and I don't mean it to come across that way,
but I don't ever listen to music when I'm driving a car,
especially a fun car like this,
so I just put it where the radio goes.
And if that wasn't already enough irons in the fire,
we've got the intercooler piping being mocked up right here.
That's gonna get cleaned up, powder coated as well.
It's turning out so sick.
Dude, what is, where did that come from?
I wanted to test fit it.
That's my next turbo.
That's your next turbo.
Compound, baby.
I was feeling really excited about this.
You didn't have to come home and rain on my parade, okay?
Oh my gosh.
So that is going in my drag car.
Is it really?
Mm-hmm, yeah.
No way.
What size is that?
I don't know.
It's a 91 mil.
91 millimeter comp turbo.
So you're a psychopath.
Cool.
Oh my gosh.
This is heavy.
And you, so you already don't know
how much this car makes, right?
Right, but I know I can make more.
What an absolute unit.
Look at that thing.
Holy cow.
So that means essentially today's lesson
isn't about try your best, do the very best you can,
shoot for the stars, because no matter what you do,
there's always somebody that's gonna do it better.
Or bigger.
And moving right along, we're finally getting a look
at the underneath of the car.
Now, since we're gonna be running ethanol,
we're upgrading all the fuel system,
including all the fuel lines,
which we just pulled off from right here.
We've got all these old, nasty fuel lines
that are coming off.
So that's gonna be sick.
Then we've got the rest of the fuel setup here.
This is the old OEM setup.
The old fuel filters just looked brown and nasty,
so we're gonna swap these out for these new clean ones.
This is also a massive fuel pump.
This is a 525 LPH Hellcat pump.
This flows 525 liters per hour.
We're going full AN lines out,
which is gonna be an overall better setup
for the fuel system when we run full ethanol in this.
Yo, guys, this is Kat.
She's absolutely just out here killing it,
getting the undercarriage finally all washed up.
If you guys remember, we went through that weird,
it was like some sort of cement puddle
or something like that.
So finally, this is looking a lot better.
We have all the fuel lines ran.
It's officially Friday afternoon.
It is crunch time, because tomorrow morning,
this has to be running, washed,
and on its way to Utah Motorsports Campus for fuel sets.
Then from a top-down view,
we've got all the wiring set up here, ready to go.
This is almost finished.
Just a few more sensors we gotta plug in.
Also, the Haltech install is going absolutely swimmingly.
We've got the IC7 hooked up here up front.
We should be just moments away from startup.
I have no idea what's going on here, but I want in on it.
Bro, are we about to get a train going?
Dang.
Oh.
Wait, no, I wanna go in front, not back.
♪ I'm a ticket to the fire ♪
♪ So probably took it the hardest ♪
♪ You ain't never seen another king where the king get cut out ♪
♪ Crueling with flame in a minute ♪
♪ Cause you're running like dying ♪
♪ I ain't know we had thunder ♪
♪ Calling everybody my brother ♪
Well, boys, it's time.
It's time to do it.
We have these two very proud,
call you like farmers, like standing out by your crops.
It's outstanding in your field.
These guys, and plus the whole crew here at Performance R&D,
can't thank you guys enough.
Although, actually, I'm gonna wait to thank you
until after we start it to make sure it actually works now.
So tons of stuff that we have cleaned up,
powder-coated, polished, installed, the whole nine.
It looks so much better,
and all that's left to do is just start it.
All right, moment of truth.
I've been so stoked for this day, and it's finally here.
Also, don't mind my shorts.
James is rubbing off on me somehow.
We've got the IC7 mounted up right here.
This is kind of like a semi-permanent situation.
We're gonna figure out something
to make it just a little bit more stable.
That looks sick, though.
Okay, we got power.
Haltech on, baby.
Let's go!
All right, here we go.
Easy, dude!
Easy, she's good to go!
I mean, granted, we didn't pull the...
Okay, we gotta figure out what that is.
I don't know what that is.
Is that okay?
Oh.
So the freshly installed gerbils are working?
Yeah, yeah.
Okay, crisis averted.
It was, in fact, just the AC.
I guess the AC belt wasn't tightened enough.
Okay, crisis averted.
Dude, she runs so good!
Maiden voyage.
Hey, yo, this thing is absolutely mobbin'.
That IC7's so sick.
Honestly, the car feels absolutely amazing right now.
It's just on the bass tune from Ryan.
We still have to get the full tune on it,
but listen, dude.
This is not good for me.
I'm in more trouble with this car.
It sounds...
It's honestly like...
I wish I could convey it to you.
It's honestly so much louder than it was before,
because we removed everything
in that stock twin turbo setup,
and it made it so much louder.
Oh my gosh, bro.
Holy...
Oh my...
I can't believe this day is here.
Look at it!
It's done!
Plus, we got it all paint corrected,
so it looks just absolutely perfect right now.
We got the whole front bumper repainted.
It looks absolutely perfect as well.
I keep...
I feel like I keep saying that,
but I'm just so stoked.
I'm honestly just so impressed
at how well this car idles.
It's like...
It's absolutely blowing my mind,
because we did so many things on it.
Went from two turbos to one.
We redid the entire fuel system
with new injectors, primary, secondary injectors.
We went to flex fuel.
We redid all the intercooler piping and everything.
We redid the entire oiling system.
Ran all new fuel lines,
and the car runs absolutely perfect.
There's no leaks underneath.
It looks absolutely golden.
So from here, we just have to get the full tune,
and we're gonna see how much power it makes.
So stay tuned for that.
I can't believe we went in one video
from pulling this car apart.
This car was in absolute pieces.
We pulled the whole motor out
to how it is now in one video.
But you guys know the drill.
As usual, if you made it this far in the video,
you're a real one.
Thank you so much for watching.
If you liked it, please be sure to give it a big thumbs up.
Hit that subscribe button and the bell.
And I'll see you next time.
See ya.
♪ I follow my father ♪
♪ Man, it's a pain like a pain ♪
♪ I bribed me, took out the hardest ♪
♪ You ain't never seen another king ♪
♪ Let the king get cut out ♪
♪ Cruel in the summer with flame in the winter ♪
♪ Cause we're running like dying ♪
♪ You know we have thunder ♪
♪ Calling everybody my brother ♪
♪ Harden the pain ♪
