・Fabulous Paper Flowers: Make 43 Beautiful Asian Flowers - from Irises to Cherry Blossoms to Peonies With 270 Tracing Templates(Released on August 17, 2021) https://amzn.to/32d3IwP
I would appreciate it if you could read these books as well.
Konnichiwa, I'm Yamamoto Emiko from Paper Decoration.
Today, I'm going to show you how to make a cute paper grape.
First, we are going to make a grape stem.
Prepare a brown piece of paper.
Fold it in a triangle, so that the diagonal line is straight.
Then, insert the pointy part of the triangle into the center of the grape.
Fold it in a triangle, so that the diagonal line is straight.
Twist the triangle.
You can twist it in either direction.
Twist it in a direction that is easy to twist.
Twist it hard.
Twist it until you feel it is too hard to twist.
Twist it in a direction that is easy to twist.
Now, you have a circle.
Now, we are going to make the fruit of the grape.
Prepare a piece of colored paper.
Fold a piece of colored paper into four equal parts.
Make a crease.
Open the crease.
Put a piece of colored paper into the crease.
Cut the piece of colored paper into four equal parts.
Prepare a piece of rubber band and a piece of tissue.
Take a piece of tissue.
Roll it into a ball.
Make it as small as a dango.
Take another piece of tissue.
Make it as small as a dango.
Roll it into a ball.
If it is too hard to roll it into a ball, you can use a wet tissue or a hand wipe to make it easier to roll it into a ball.
Wrap the rolled tissue with a piece of colored paper.
Take a piece of tissue.
Wrap it lightly.
Roll it into a ball.
Take another piece of tissue.
Wrap it lightly.
Take a piece of tissue.
Roll it into a ball.
Take a piece of tissue.
Make it as small as a dango.
If it is too hard to roll it into a ball, you can use a wet tissue or a hand wipe to make it easier to roll it into a ball.
Take a piece of tissue.
Wrap it lightly.
Twist it.
Wrap it lightly.
Make it as small as a dango.
I made about 20 pieces of KOROKORO.
I used 18 pieces of KOROKORO.
I'm going to glue them together.
I'm going to use glue sticks, which are made of wood glue.
The glue sticks are a bit watery.
I'm going to use these.
First, take one stick out.
Put the glue stick on the fluttering part of the stick.
取り付けます。
この軸の、ひらひらした方、二つに分かれているので…
ここに挟むように…
入り付けして..
おさえます。
このようにまず一つ一番下に…
葡萄の実が付きました。
また一つ取り出してきて...
この先のところに..
Put a little bit of glue on the back of your hand, and put it on the top of your hand, so that it sticks to the bottom of your hand.
Repeat this process from the bottom of your hand to the top of your hand.
When your hands are sticky, take out your hand blower, and wipe your hands.
There are some places where you need to wipe your hands.
When your hands are sticky, wipe your hands.
Now, let's make the leaves.
Prepare a piece of paper that is about the size of a leaf.
This is a 12 cm square piece of colored paper.
Fold the piece of paper in half.
This is the side that is folded.
Mark the middle of the piece of paper.
Draw a line to the middle of the piece of paper.
Draw a line diagonally from the bottom of the fold.
Draw a curve, and attach it to the middle of the piece of paper.
Draw a line diagonally from the top of the fold.
Draw a curve, and attach it to the edge of the fold.
Draw a curve, and attach it to the middle of the fold.
Draw a line diagonally from the bottom of the fold.
This is also a little bit of a curve.
Draw a line diagonally from the top of the fold.
Now, it has a leaf shape.
Cut the paper in half.
There is no exact shape to it, so you can just cut it roughly.
So, this is how the shape is made.
Once you have one shape, you can trace it with a pencil, and you can make a lot of different shapes.
Once the leaves are cut, you can see that there is a line in the middle, like a leaf vein.
You can see that there is a straight line here, so you want to make sure that the right and left leaves have a straight line as well.
You want to make sure that the right and left leaves have a straight line as well.
You don't have to worry about it getting off to the side, it's not a big deal.
Now, I want to attach this piece to the top of the board.
I would like to attach it to the tree.
Align the cut line with the cut line, and put it in just a little bit like this.
It looks like this.
Attach the cut line of the leaf to the glue.
It looks like this.
You can put it anywhere on the top of the shaft.
Attach it so that it is sandwiched a little.
Now it's done.
If you mix the color of the flower paper, you can make a grape of a slightly different color like this.
I think it would be cute to make a green muscat.
The top of the shaft is a ring like this, so you can put something like a string through it.
If you put a string through this ring, you can hang it like this.
If you tie it like this, it will be fixed.
You can put it on the side, or you can put it vertically.
You can put it side by side, or you can put it vertically.
Sometimes, you can put the glue on the back of the leaf, and put it on the string.
You can decorate it in any way you like.