We just finished up this Supercharged Coyote-swapped 1976 4x4 F150 and we're super excited about it. We completely went through every aspect of this truck to make sure it was perfect for our customer. We opted to use the original Ford factory two tone paint for a nostalgic feel, but the brand new interior we did is anything but. It almost feels like a brand new F150 inside the cab, with a few classic twists. We used our FFG Mustang Seat Brackets to install these bucket seats out of a Mustang, and they're extremely comfortable and prevent sliding across the road while putting this Whipple Supercharged coyote swap to the test on the road. Speaking of sliding, we used our Ford Pickup Seat Belt Retractor Covers to house the seat belts, and boy do they look good. (Links below). We added an FFG billet dome light to brighten up the interior. We also used the original factory grill and side trims. The Coyote with a 10 speed automatic transmission cooks down the road and it's an absolute blast to drive. Tons of horsepower with this thing for a vintage truck, especially for a longbed. It doesn't get much better than this! Stay tuned for some little burnouts at the end...
Make sure to follow us on Instagram or Facebook to see the behind-the-scenes on our builds and projects, and subscribe to our channel and hit the little bell icon so you don't miss a video. Thanks for watching.
Check out our site for hundreds of quality and custom products for classic trucks. Chevy, Ford, GMC, you name it. www.fatfender.com Feel free to shoot us an email if you have any questions at [email protected].
Okay, hey guys, we are in Gilbert, Arizona, and we just finished a 1976 Ford F-150 on
the front cover of the F-100 Builder's Guide.
So hopefully you're going to go out and support the magazines and purchase it.
And so what we've got is a completed restoration, resto-mod, full-blown build right behind me.
1976 Ford F-150.
So there's a lot that we did.
Now, the cool thing about this is this is actually the original two-tone.
So this is the original metallic silver, but not the original white.
The original white actually was, I don't remember which one it was, but it was a little more
off-white, and it didn't actually look really good with the silver.
So we kind of changed it up a little bit and picked a different Ford white, kept it Ford
for everybody, so that it would complement and look a little bit better.
And so at the end of the day, we've got this pickup truck here, ready to go take it for
a test drive.
So what we've got is all the original trim that we sent out, had polished, cleaned up,
new rubber on it.
We've got these really awesome fuel wheels.
The original grille shell, which is kind of cool.
The grille's in really good shape, so we cleaned it up, polished it, because we wanted it to
just look spectacular.
And a super over-the-top interior, so you feel like you're in a brand new F-150, which
is kind of cool.
And then, under the hood, we got a 2019 Mustang GT Gen 3 Coyote swapped with a 10-speed automatic
transmission out of an F-150, and then we also have the F-150 transfer case.
But not to be outdone, we added a Whipple supercharger, and so it's got a lot of horsepower,
and it's fun to drive.
It's fast, and it's mean, and it sounds awesome.
And the guy that owns this truck is going to have a ton of fun driving this thing.
So it's not tuned super powerful, meaning we kept the pulley kind of larger, just because
you can do a burnout in third gear, get sideways that fast, and so we also want to err on the
side of safety.
If he wants to change the pulley and get it up to 800 rear-wheel horsepower, that's up
to him.
Now, the interesting thing about this is that this is a long bed, and it's four-wheel drive,
and so it's not your typical Coyote swapped vehicle you're seeing out there.
You're always seeing the 1953 to 1956s, 73, 79, 67, 72, all those other generations, two-wheel
drive short bed.
This is four-wheel drive long bed, and actually, it looks the most appropriate with a little
bit of a four-inch lift and all Fox shocks on this thing, that it actually handles really
well.
So even though it's got a lot of power and some of the suspension is still stock, because
of the long bed and the size and just the girth of the vehicle, it actually rides super
comfortably.
So we're going to go for a drive, and let's jump in, and let's go show you what this thing
can do.
Fire this bad boy up.
One of the things we tried to do is not allow the exhaust to be super loud, even though
he wanted to hear this thing, but I hate drone, I hate obnoxious exhaust, just with passion.
But at the end of the day, we tried to meet to where it sounds good under a load, but
not too crazy.
And so this is the exhaust system we came up with.
We're using resonator, and I think we have one or two resonators, and then we also have
a nice big Borla muffler.
It actually sounds pretty good now.
I'm actually happy with it.
I'm okay with it.
And with all the sound deadening and everything we have in here, and because it's a long-wheel
base and the muffler's clear, or the tailpipe's clear in the back, it actually, there's no
drone at all, and so I'm pretty happy with it.
Just a few little things.
We got the retro sound radio here, mounted to some speakers in the back, so you still
have the vintage touch to it, and you've got wireless for your phone, hands-free calling
if somebody calls you, and you can hear.
We've also got the Restomod AC system, so you're gonna get cold air.
We've actually got a kit that actually makes all this stuff work, so if you're doing a
Coyote swap and you want to put Restomod AC in your vehicle, we sell a kit that makes
it all work.
So these seats that I'm sitting in belong to a Mustang.
The customer wanted bucket seats, and let's see if I can get this adjusted a little bit
better for myself.
Well, we actually talked about it.
He goes, what should I do?
Should I do bucket seats, should I do a bench seat, and I initially thought we were gonna
do a bench seat, and then I said, well, it all depends on how much you plan to drive
it, comfort, and I said bucket seats are more comfortable, so he said, let's do bucket.
So we actually came up with a bracket that allows you to install a bracket that makes
it easy for you to put Mustang seats in it, so if you're doing a Coyote swap of your own
and you want to put Mustang seats in it like we did, we sell a bracket, makes it super
simple.
You can go online, I think it's like 179 bucks shipped or something like that.
Takes all the headache out of trying to figure out how to mount it.
You still use the, right here, off the Mustang, you can still have that piece there, bolt
it in, connects.
You can still use the same mount, and so it feels very modern, feels very normal, super
comfortable, it's got little bolsters that kind of hold you in place, and you're not
gonna be sliding all over the road, or you're not going to be sliding all over the seat
as you're sliding all over the road when you get on it.
But it's comfortable, I mean, honestly, I could drive this thing every single day, it's
that comfortable.
It's just classic looking, it has a nice console right here, got plenty of storage, cup holders
for all the fun stuff, you got some lights here for fog lights, you got your four wheel
drive switch to go into two high, four high, four low, and all the amenities that you really
need and that you use, and you just go cruising, so it's pretty fun, I like it.
So we'll get going and get on the road and show this off just a little bit.
You wouldn't think with 35 inch tires and all that tread, you can get it to break free
just like it does, but just the little bit back there, it kind of spun just a little
bit, so you kind of have to be a little more cautious.
So 1973-79, they call these trucks the dent side because where the molding goes on the
67-72, it pops out, they call that the bump side, and on the 73-79, it's pushed in, it's
dented in where the molding goes, so they refer to it as the dent side.
A lot of variations in 73-79, not as many in 67-72, and so a lot of the kits and things
we've come out with for the 73-79 have proved to be a lot more challenging.
They had a lot of different designs, in 76 they added the three point seat belts, but
you couldn't get that option until 1976, and so if you want to add those, it's just a little
bit more complicated, and so there's a lot of four wheel drive differences.
They were constantly changing coils, the suspension design, they had a high boy version, they
had just all these different versions, and it seems like in 73-79, that was kind of where
they were really getting into a more friendlier, comfortable truck, and so you had more amenities,
things are getting more built into the dash, more comfortable, just more ergonomically
friendly, and so as you get into the 73-79, the suspension and everything is just a lot
better, and so a lot of these trucks are becoming a lot more popular to overhaul and rebuild
because it is a little bit more comfortable truck but still retains the real classic look.
Now in 78-79, the headlights changed and they went to a square headlight, which some people
love that, I'm impartial, I don't really care, I like them all.
These are basically all new headliner, everything is brand new in here, and so it really gives
you an idea of the changes we've made.
The goal really is just to make it as comfortable as you can and still, in some ways, modernize
it a little bit, which everybody likes their new trucks, but can you still retain some
of that nostalgic, old school, retro feeling that brings back all those memories that we've
talked about in other videos, it's memories, and sometimes you just want to be a badass,
so that's going to happen.
You just want to cruise around and know that, kind of a little bit of a badass, when you
pop the hood up and everybody sees that Coyote and the Whipple supercharger, kind of a little
bit exciting.
They hear it start up and they see it take off, I mean it's pretty impressive.
I've driven this quite a bit and it's fun to kind of be side by side with somebody and
they're giving you the thumbs up and then you just blow the doors off them and everybody's
wondering what happened, especially with the supercharger, I mean it's like instant power.
Turbos have that second delay, but not on a supercharger, it's pretty instant.
We've put 350 miles on this and probably, I think the guy's local, so I think I'm usually
about there, I'm about ready to go ahead and let it go.
So within the next 50 miles, we've got a little bit of paint touch up to do, now that we've
got some miles on it, we need to kind of polish it up and fix a few little paint chips and
get it to him so that he can take it and drive it.
Because he's close, I don't mind letting it go a little bit earlier just in case there's
a problem, it's really easy to fetch it.
When they're a state away or eight states away, man that gets really problematic and
whose fault is it and whose problem is it and who's responsible for it and so I definitely
like to put more miles on them just to avoid those awkward conversations.
But we'll get over here, we're going to get on the freeway and just kind of get it up
to speed.
It drives actually really well.
The disadvantage to these trucks, when you leave everything stock, is that you're stuck
with a power steering gearbox and those are not always the best and so you usually got
to replace them.
I like to replace them with an original Ford one, maybe have that rebuilt and get the needle
bearings in there, maybe it's a little bit more tighter of a feel, but you're always
going to have, with a lifted truck and big tires and a gearbox, there's always going
to be that 1970s play in the steering wheel as you drive it.
So you can see that there's just a little bit, that's kind of about the play you're
going to have.
You're just going to have to wrestle with it, there's not much you can do about it.
If you change all your suspension and you put a different power steering rack or something
up front to figure all that out, it's definitely going to be a little bit tighter feel.
But that's a whole other level, to get there adds a whole other layer to a build and cost
and not everybody wants to go there.
I don't mind managing the steering wheel a little bit.
That's how you get on the freeway, we got up to about 95 right there.
I didn't push it, we were chirping between all the gears and so I don't want to break
anything honestly because I don't want to have to fix it.
So I'm always that conservative, guys want to do burnouts and all this stuff, I'm like
don't break it, don't break it, let's get it to the customer first, let him do the burnout.
Smooth though, it feels as smooth as my F250 that I drive every day, definitely not any
rougher and it's got more power than my F250 for sure.
We took it on a dyno and keep in mind we're only doing about 10 pounds of boost on this
when we did it and at 10 pounds of boost on a dyno with a 10 speed transmission and
running through a transfer case we still managed to do 500 rear wheel horsepower which is actually
a lot.
Most of your vehicles that are being driven on the road today are nowhere close and we're
able to actually have a lot of power which I think is plenty, it's not unmanageable.
Now if we change the pulley and we start getting up to about 18 to 20 pounds of boost this
is going to be a lot more of a handful and I guess if you're looking for dyno numbers
just to kind of brag maybe you want to put a larger, smaller pulley but again I'm always
conservative, I don't want to break anything, I don't want to see anybody spend a bunch
of money on stuff when it's going to be a lot of fun.
750 rear wheel horsepower is actually hard to drive, you're only using about quarter
throttle, even me right now, I mean I'm barely, if you watch my pedal down here, I'm cruising
70 miles an hour, watch how it hardly moves, like I'm barely using like an eighth of an
inch of the throttle, it's because it's got all the power in the world.
Now for gears we did go with a 4.11 gear ratio and obviously we could have gone with like
3.90s but you're also trying to get some performance and quickness and get going and so 4.11 gears
we felt we could justify it with the 35 inch tall tires and a 10 speed transmission and
so here we are, we're cruising at, I'll go cruising speed of 75 miles an hour and we're
at 2,000 RPMs, so even with a supercharger he's probably going to still get 18 miles
per gallon out of this thing which is still pretty impressive considering the magnitude
of the truck and the gears and the ratio, it's just what a 10 speed automatic transmission
does, now it'll shift more than like a 6 speed but it's just, and it'll feel different but
that's just the way 10 speeds are, some people love them or hate them, I tend to like them
because I feel like it's a much faster driving vehicle, you're not having to take the RPM
so high up before it's quickly shifting through all the gears, it's just a more compressed
ratio and you've got 4 overdrive gears with a 10 speed automatic transmission so you're
just going to get really good fuel economy and still have plenty of power to boot, ok
yeah we're going to get lunch while we're out and I'm on a diet and so I'm trying to
lose weight so I'm thinking salad is what it's got to be so I'm actually down about
35 pounds from a few months ago and just started hitting the gym again and trying
to get back into shape, I'm 48 years old and so I don't want to be super fat when I hit
50 because I've heard at 50 man it just goes downhill fast so I'm trying to get back into
shape and doing these videos I look at myself and I feel like everybody lies when they say
the camera adds 10 pounds it feels like it adds 20 pounds, you never really feel as big
as you when you see yourself on camera and so slim it down a little bit, New Year's resolutions
coming up so might as well get started on those early but I mean probably the most difficult
challenge you have with trucks like this is sealing them up against weather, not against
weather but against wind is what I'm trying to say, the weather you can keep out but again
you're still dealing with 1976 technology and that was just a rubber gasket and it got better
in the you know in the 90s things were a lot quieter but it's not too bad I mean we could
crank the radio up and you just got that external wind noise you're battling, also not aerodynamic
either, trucks these days are a little bit more round and they can handle the wind a little bit
easier so I'm pretty happy with this thing I hope he's happy too, we do a lot of pickup trucks we're
getting into Broncos and the specialty I would say for us is that I like to make sure everything's
been engineered to go together and also like to make sure that if I'm gonna do it again that we've
developed the system to allow us to reproduce the same quality of product over and over, Jonathan
Ward at Icon he's he's kind of you know I honestly I just kind of studied him and his process a
little bit and kind of over the years had to learn to develop my own and I wanted to be able to
reproduce things over and over so I've kind of looked at a lot of different companies and builders
and try to find out you know what is our our niche and and your niche is you know as a builder is
really what you like to do I like to solve problems as we as we try to build trucks you're
always faced with problems and so how do we solve it for not just this build but for the next build
so we don't have to keep remembering what we did to solve it and and then how do we take those
products and share those to those guys that maybe can't afford to hire a builder but would like to
build their own truck and would like to have it turn out nice and how can we help them solve those
problems and so that's something that I've tried to implement in Fat Fender Garage is you know the
skills that we've learned and developed share those with people and sell those parts to those
people that you know are looking for it and it is actually a really tall order we spend a lot
of money and time developing maybe one little bracket but once we've done it it's over so I
might have 40 hours but I've spent developing a $50 part and but I don't ever have to develop
it again and it's done and it works and it's you know it's wonderful now coyote swaps are all the
rage right now and I fully stand behind them I don't really want to use the old FE motors or
you know some of those you know 360, 390, 460, 490, 420, 427 those are those are actually great
motors and I don't want to discount them there is a place for them but actually not at our shop I
try to stay away from because the power of modern technology and the power of our coyote and merge
together right with the right transmission the right rear end does produce something that none
of these other motors will ever be able to produce like this truck right here you see a Ford Raptor
right there this is faster than the Ford Raptor in a heartbeat and it's got a six-cylinder EcoBoost
in it and twin turbos and we actually put one of those in a little Ford Ranger which was fast and
but it's hard to be the feel and the sound of a v8 now with that said we've actually purchased some
Godzilla motors and as soon as we get a couple parts in I hope to start retrofitting the Godzilla
motor into these as well and have two motor options that are available and we'll actually
figure out the cam swaps and all the things you need to make a kit for it so you can create a
little more horsepower so where we going for lunch in Dana Park okay so for brake system on this we
actually have a hydro boost system works pretty well that was the decision we made when we were
determining how much power he's going to have and then he had big 35 inch wheels on it we actually
developed in addition a Wilwood 14 inch brake kit to put on this at the same time and so you got
plenty of brakes we put a Wilwood brake system disc brakes in the back those are some of the
other upgrades we made to it I'm trying to think if there's anything else special oh we have our
wiper reservoir on this as well that we developed that works in the first gen Broncos second gen
Broncos 67 to 79 pickup trucks and it's a little aluminum reservoir with an electric pump in there
where's that Jack where we I passed it all right we've got an LMC from bumper with the square or
maybe it's the round I can't remember what we put on it I think they got both options fog lights we
did change him and put some wider bulbs in there rather than yellow we've got also some the lights
on the front of this are trying to think I think why I wonder why I can't remember it's hard to
remember you got 25 projects going on it's trying to remember every little detail of everybody's
project it'll come to me we use a flaming river steering wheel we're actually going to have that
option available for people that want to I don't think I want to park this truck by all these people
who don't actually don't actually understand what I'm driving here and they think it's just an old
piece of crap truck or something but I'm parked here a little bit out of the way anyway so we got
a flaming river steering wheel which we use that allows us to you know give us a little bit more
space because this is a little shorter it's not quite as bulkier as the the I did at one and so
not that there's anything wrong with the I did at one but I just kind of like the flaming river
one a little bit better so we became a dealer for them when we were making a decision we got
custom door panels which we've designed we've got Fox shocks on here which is actually a really big
chore to figure out which ones would work but we figured some out and cool cool truck I mean I I
don't know I can't really find anything to complain about these little pieces right here you can see
those seat belt covers those actually crumbled because of the Arizona Sun they were so old so
we actually dropped one and it shattered into like 30 pieces and so we made these out of aluminum
because we couldn't actually find any of them that were any good and so we actually just created those
for out of ABS because they're hard to find and everybody's if they do have them their toes so
and I love this thing I hate to let them go so I'm always like well we've got another week of
touch-up paint and that's because it's fun to drive and and they're pretty awesome so we're
gonna go eat and we'll be back at it