Building A Custom 1 of 1 E91 M3 Wagon! (Part.9)

Nour Hummadi
114 followers
12 Video Views·Sep 7, 2022
Shop Real Carbon Fiber Accessories: https://www.SimplyCarbonFiber.com/NOUR
Use Code “NOUR10” for 10% OFF.
Instagram For Cheap Cool Parts: https://www.instagram.com/nadiperformance/
●My Ebay Store: https://www.ebay.com/usr/nadiandcompany?_trksid=p2047675.m3561.l2559
● Merch: https://NADIPERFORMANCE.com
● Follow me on Instagram: https://www.instagram.com/nour_hummadi/
----------------------------------------------------------
SPONSORS! (CODE)
KiesMotorsports (NOUR5)
SimplyCarbonFiber (NOUR10)
BurgerTuning
FCP EURO
AzaAutoWheel
Suvneer
SSR Performance
Valvetronic (NOUR)
RoughCountry
----------------------------------------------------------
What's up guys today is September 5th of 2022 at 109 degrees. Lily says excessive weather. I don't
even know excessive heat warning. Should I really be out here? The thing is end of the day I need
to make a video for you guys. I've been keeping indoors trying to stay cool the past couple of
days but the thing is the sun is going to stay out for the next 10 to 15 days. We can't go that long
without a good video. So do me a favor guys just smash that like button for me because I'm already
sweating and I haven't even started working yet. It's going to be 110 degrees and it's actually
going to go up to like 115 today. So oh buddy it's gonna be pretty intense. Again shout out to my
parents for this umbrella. It's really gonna save my butt. Just to give you guys a small little
update before we actually get into the M3. This is the wagon guys. We removed the rear subframe.
We removed the rear fuel tank. Removed all the DMTL pump lines and everything. So this thing's a
hundred percent and I mean literally a hundred percent stripped other than like the e-brake
thing right there which I see there's no reason to remove that but like literally everything else
guys is a hundred percent stripped and this thing is ready to start getting assembled. So yeah finally
finally guys we're going to be taking apart the E90 M3. I know a lot of you guys told me just to
rebuild this one. I know E90 M3s are going up in value like crazy and honestly guys the V8 BMWs
are going up in value just because of everything. The whole world's going electric and stuff like
that. People are going to want these cars and I know it's going to be sad to sacrifice this one
but ultimately we're going to be building a Lime Rock E91 M3. I think that's going to be 10 times
cooler. So I feel like this is being sacrificed for something even bigger. For those of you guys who
are new to the channel this is a E90 M3. We ended up picking up as a parts car. It has the
shadow line trim package. It has the manual transmission. I went ahead and removed the boot.
This thing is absolutely mint. Everything is interior is absolutely. Guys look at these seats.
It looks literally brand new. It has the carbon leather package. The steering wheel is absolutely
mint and yeah this is so many cool things. This car is literally the best donor car for our E90 M3.
There was also some surprise modifications with this car when we ended up picking it up but let's
be real guys these modifications we're not going to be able to enjoy until we get it on the E91 M3.
So I think without further ado let's go ahead and start disassembling this whole front end so we
can pull this engine out. The heart of the beast. The V8 BMW S65 and slap it into the E91 M3. But
before we actually get into today's video. Today's video is sponsored by Simply Carbon Fiber. For
those of you guys who don't know Simply Carbon Fiber is the one-stop shop for all your carbon
fiber accessories. You guys know I've been rocking this wallet for so so so long. It's a
minimalistic wallet. I mean why is anyone even using the old traditional wallets anymore. This
little dude packs so much and literally fits anywhere. So I got all my cards in here. I think
I have over like 10 cards right there. Got the money in the back. Forged carbon fiber finish and
they also have the regular carbon fiber finish which I actually have as well. And like I said
they have a bunch of different accessories. One of which is this forged carbon fiber watch that
absolutely looks amazing as well. This is actually the nicest watch that I have and I literally only
keep it for when I go out and things like that. You guys already see got my haircut and everything.
This is nor in the future and I'm about to actually head out with all my nice carbon fiber
goodies. So if you guys want some cool carbon fiber goodies as well make sure to check out
Simply Carbon Fiber. Link's gonna be down below. Don't forget to use my code. And guys about two
hours later my camera kept on overheating every 10 to 15 minutes. I mean this camera overheats
normally every hour hour and a half of recording but it started literally overheating every 10 to
15 minutes and literally got to the point where every time I want to remove something I have to
wait another 30 minutes for this camera to cool down. So I was like you know what let me just go cool
down for a little bit as well. Now that I'm pretty much cooled down you get to see um the sun's
pretty much down but it's still over 100 degrees right now. But since the sun is actually down
it's way easier to work. So I definitely wanted to come back out here. Don't mind the crazy haircut.
I know I need a haircut. I've been playing with my hair too much and I look like a clown. I'm not
gonna lie. But at the end of the day when your boy's driving the E91 M3 I don't think I'd be
looking like a clown. You all know what I mean. So as of right now we got the whole front clip
off of the car. I do want to start draining the fluids and start removing the coolers. This whole
front end thing because again we want to be able to pull out this motor. I'm hoping to be able to
actually fully pull out this motor by the next video. In this video I want to get everything
else removed um so we can actually do that. So without further ado let's go ahead and drain all
fluids and fingers crossed it's not gonna be a messy job. And this is the next morning. Last
night as I was working on all the fluids trying to get the coolant out the oil out of all the
coolers and all that good stuff um the camera pretty much decided to die on the battery and
I could have went back in but then I had to take off my gloves again and all that stuff. So any
long story short last night I just decided to just go ahead and take care of all the messy stuff
off camera and then today I'm going to show you guys the progress that we've made last night. So
that does mean I need to disconnect the drop shaft from the transmission and I'm pretty sure a bunch
of other things. So without further ado let's go ahead and get back into the car. It is 110 degree
weather. It's literally not weather to be outside right now but I'm going to try my best and let's
see if we can make something happen. If it doesn't look super sunny right now it's because I have
tints on these. I'm going to open up the window. I'm not excited but you gotta do what you gotta
do. I mean I'm excited for the build so that's what's keeping me going. But yeah wish me luck.
Hopefully the camera doesn't overheat every 10 minutes and uh let's get to it. So just to show
you guys all the coolers removed. Pretty much this is the entire front cooling assembly. We removed
the oil cooler as well. I believe that's the other oil cooler. A bunch of plastics the front radiator
support. So at this point guys as you guys can see pretty much got rid of everything that is messy.
Pretty much plugged up all the lines um to make sure nothing leaks overnight. Looks like everything
did an A1 good job. So without further ado again let's just go ahead disconnect as much things as
possible. Get it out of the way so we can try to get this engine out again. This is my first time
on my own. Wish me luck guys.
And guys about an hour later we finally got everything disconnected. You guys can see right
over here in between there's nothing connected to the engine um besides this pipe right over here
which I couldn't actually get the bolts out of. It's just in a very weird angle. So I went ahead
and just disconnected it entirely from the car. I went ahead and disconnected the pvc uh the fuel
line. I think this is the brake breather valve. Everything else including all the wiring is on
top of the car. Um I think honestly the last thing to completely have this engine completely
disconnected from everything will be this little coolant line I believe. So I'm gonna go ahead and
remove this coolant line. Drain the fluids. I'm gonna go ahead and get my pan over there and then
once I actually drain that out we can go ahead and put the car up on jack stands and then I think
start working on the transmission stuff. Get everything disconnected on the transmission stuff
and then I think we should be literally ready to actually drop it. I'm gonna try to drop it with
the entire front subframe um which means I'm gonna have to remove this guy. I'm gonna remove this guy.
Release those four bolts. Disconnect all the lines back there. Obviously take off the wheels
but I think if I actually drop the subframe with everything I think it's gonna be super easy to
work on the engine and then once the engine is ready we can go ahead and just move that whole
front end onto the e91. Now this is all theoretically I mean I'm just a dude in my
backyard so uh end of the day we're gonna make it happen. Let's just see how smooth it's gonna go.
Guys I'm not gonna lie my other m3s have never actually had this strut brace for the e chassis.
This is a 2008 so I'm sure every other e90, e92 actually has an option for this. I don't know if
this is like considered the m performance strut brace but I thought something would be connected
to this for like the edc suspension but it's just looking like a strut brace. A really nice one too
so yeah for those of you guys who have an e90, e92 and don't have these beautiful looking like
m things on your strut braces I mean I don't know what y'all are doing. I just looked them up on
ebay and they're like $250 and I think that's super super super cool and I can't imagine this
not fitting for like a 335 as well if you guys are trying to do a retrofit like a little m sport
retrofit and you guys have the m calos for like an n54 or something I think it'll be super sick
but yeah anyways just got these off I thought it's a little cool note to mention we just got
literally everything on this shock off including the bolts on the top all the wire is disconnected
and this side as well so literally the engine the suspension on the front end is completely done
it's just held on by the subframe we're gonna go ahead and get to the back right now to the
transmission and disconnect as much things as possible remove this pan and uh yeah just get
this bad boy ready to be pulled out
so
hey guys you're officially at the end of the video so we made a lot of progress on the e90m3
pretty much got the whole front end stripped apart I mean the engine if the engine was
disconnected from the transmission we literally be able to drop the engine right now but the
transmission is still connected I kind of want to transfer the whole thing over without
disconnecting everything just makes life a whole lot easier we got the exhaust off the car as well
so probably the next thing is gonna be the driveshaft and then a few other like connectors
for the transmission and I think we should be able to get ready and just drop the transmission
like all the just all the stuff you guys know that also the e91 is an all-wheel drive car and
the m3 is a real-world drive car so we're gonna have to literally do some retrofitting from the
chassis of the e90 to the e91 to get the transmission to actually mount it properly
without doing those modifications we're not gonna be able to mount that transmission so
we'll cross that bridge once we get there but if you guys are excited on the progress of the build
so far make sure to smash the like button literally in the next episode once we pull
off that engine and transmission I'm gonna start transferring things from the engine bay
over to the e91 so we're actually making some serious progress on the actual e91 chassis
so yeah guys if you guys are excited for that make sure to smash that like button for me and
I also want to mention before I actually end this video I have an instagram that not only has
my merch and stuff like that on there but it also has some used modifications that I sell
for less than half like a lot of used modifications I end up getting that I don't need or I end up
finding a good deal on it end up picking it up and I have it on that instagram so for those of
you guys who want some used car parts some used car modifications bmw modifications make sure to
check out that instagram down below because I'm gonna be posting literally everything not only
my stuff my friends's things so you guys will have plenty of opportunities to cop some bmw
modifications for your cars for pretty cheap from a reputable person because I'm not a scammer so
if you guys want to check out that instagram it's going to be linked down below under our
sponsor of today's video which is simply carbon fiber gotta put credit where credit's due but
without further ado that is gonna have to conclude the video I love y'all so much remember
to stay humble I'll see y'all in the next one peace out
