An old Baker’s Rack can be reconfigured and outfitted as a bin storage system, clamp rack, and tool organizer. We are still in the prototype stage, but see what we’ve done so far!
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https.//www.dirtfarmerjay.com/shop
Our friends Kim and Jesus gave us a couple of rolling baker racks from their Puerto Rican restaurant. They are aluminum construction, so they are easy to modify. We made one into a solar dehydrator (we’ll feature that another time!) and one into a shop storage column that serves many functions.
The rack needed cleaning and we did that with spray on degreaser and a brass bristle brush. Once clean, we removed the integrated caster wheels and replaced them with a robust wood frame base with heavy-duty locking swivel casters. With a solid base and improved smooth mobility, it was time to work on the top.
The “L” frames on the sides were mostly too close together for the tool cases and DeWalt® lock-top storage boxes. So, we drilled out rivets on several sets and put the frames wider apart (using short ¼” bolts, nuts, and thread lock) so that our storage bins would fit. It’s still a work in process as we determine what we like where, but we feel we are on the right track.
We bought some commercial pans that fit the rack, but found the aluminum sliding on aluminum, with significant weight, needs some help in the form of UHMW (ultra-high molecular weight) plastic tape. This makes a slippery surface and allows trays to slide about easily.
As it is now, our rack has active parts storage, some tools, pull-out trays for various purposes, and racks temporarily attached for clamp storage. The tools are either on sheets awaiting further organization or in the plastic clamshell the tool comes in (such as a Kreg® pocket hole jig), or trays.
We are still finalizing the design but found that wooden flat trays with slots to ride along the edges of the rack trays do not work very well. The is too much friction so they don’t slide smoothly or easily.
As for the sides of the rack, one side is presently dedicated to Rockler® clamp racks. They are temporarily affixed to the sides. We like the placement, so they will be bolted in place shortly. The other side is an open slate. Candidates for placement on that surface include more clamps, squares and straight edges, layout tools and spray can racks. We’ll see and report on that when the time comes.
If you’ve got some ideas or comments, let us (and your fellow viewer family members) know.
In the meantime, JUST DO IT YOURSELF!
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https.//www.dirtfarmerjay.com/shop
Follow us on Social Media to know when we’re building projects or releasing new episodes!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
One of the things in the makerspace, the shop, that's always at a premium is space.
The second is keeping your tools and supplies close to your workspace.
Well, we're repurposing a rack here and it's in prototype stage.
Stay tuned and I'll tell you a little bit about what we're doing and invite your input.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
I love finding materials or fixtures or things that were invented for one purpose,
but can be repurposed for something else.
Recently, my friends Jesus and Kim at their restaurant had an excess bakery rack and they
gifted it to me.
And I looked at this rack and said, there's got to be a great use for this in the shop.
So what you're seeing is a prototype fixture right now.
Nothing's really finalized on this, but there's lots of things you can see
that you can get very quickly into this rack.
But there's some things that might not be so apparent.
So first of all, what we did is took off the rollers that came with the rack and put a
base in there with some larger ball bearing rollers, along with some step pedals right
here to lock it if need be.
So this has got to be very mobile.
Number two, we found that the standard pitch that these shelf supports, which are right
there, is generally too close for the type of things that we're going to put in.
So notice like here, we modified the distance and that's pretty easy to do by drilling out
a rivet and then just using a little hex bolt and nut.
So you could see that's the original.
This is the modified one.
And that allowed us the spacing right here to put something like this, a Kreg tool clamshell
in there.
Now, there's lots of other things we're doing right now to work to space things out.
So some of these tool or parts organizers go here.
But this has become extremely handy.
And as you can see, it's a work in process.
There's temporary things.
Does that fit well?
Does that stick well there?
One of the real important things here are these clamp racks on the side.
And you can still see they're prototyped right here because they're only clamped on.
But this has worked out pretty well.
And I'll end up mounting them likely in those positions where I'm able to keep a lot of
these handy clamps, these speed clamps very close here.
Another thing you've got to keep in mind is that you need to have access to the back as
easily as you do the front.
And the reason for that is that you access this rack from both sides.
So sometimes you're going to pull it halfway out here and access the organizers or the
parts or the inventory on that side.
And other times you're going to pull it out in the front.
Here's another lesson we learned.
While you can use these trays that are literally purchased from a restaurant supply, aluminum
doesn't slide very well and neither does wood over these wings.
You end up having to hold it.
It works pretty well.
But now we're working on using some of this high slippery, high molecular tape that we're
going to put in some of these areas.
We might use some cutting board material to make everything slippy and then figure out
the distances that we have to have everything to accommodate whatever the runner material
is.
But the concept is working beautifully.
It's a long way from finished, but I make a lot of use of it right now in its prototype
stage.
If you've got some ideas or concepts you think might be helpful that you'd like to
share with your fellow viewers or back to me, I'd love to hear it.
And if you've got other things you repurpose like this to give high utility in the shop,
this is something we like to hear about.
Another thing that you might find interesting is this video that we produced on where you
can find free organizers are all over the place when you buy tools.
And we came up with some effective solutions for that.
Check out that video.
And then here's another video that we produce that we know you'll like, but YouTube thinks
you're going to love it.
Hey, thanks for watching today, and we look forward to hearing your feedback on this system.
Until the next time, this is Dirt Farmer Jay from DirtFarmerJay.com.