This is the ninth installment, that's way too close,
of this tillering course.
I hope you're enjoying it.
This video is for you.
If you want to build a bow, you're in the right place.
Playlist below in the description
has all the videos to this course.
So you can check that out if you'd like to,
as well as other helpful links.
Check out shaddaproofartery.com if you haven't yet.
I'll give you some bow making gear.
I'll give you some bow strings.
You know, just head over there if you want to support.
Appreciate it.
See you guys in the course.
How to know how much wood to remove,
and specifically for different parts
of the tillering process,
because it changes over time.
Now this is a method I've taken bits and pieces
from different people,
and through making many bows myself,
this has worked for over 50 bows.
Bows just like these ones I'm showing you
to build today for me.
So here is how I know.
Step one is floor tillering,
or if you got a tillering tree,
you could just skip the whole thing.
But basically like this bow here
does not bend at all right now.
And so we need to remove wood until it bends.
This is where I might use a belt sander a little bit
just to get it bending.
And I want to use it on the floor, push it gently,
but to bend the limb probably three to six inches
somewhere in there, and then it's floor tillered.
And the main goal there isn't to make it perfect,
but just to make sure it's even not.
So just one part of the limb is bending,
but it's even enough to start using a tillering stick
or a tillering tree.
Or you could just skip that whole process
and throw it up on the tillering tree.
From here, you could just do the same thing
and ball it until you get to five or six inches.
And then you can start tillering from there.
But this first step is what I say, use a belt sander,
just be aggressive with a scraper or something like that.
You could even use a rasp just to get it down
to bending to four to six inches somewhere in there.
And then we'll move on to the next step.
Now that we've got the bow floor tillered
or just on the tillering tree
and we're bending four to six inches, we can start marking.
I would grab that six inch scraper
and find where the smallest gap is.
And there may be no gap at all in part of the limb.
Start marking there with a Sharpie.
At this point, we're gonna mark with a Sharpie.
You could use a tillering gizmo if you'd like to.
And then it's marked with a pencil
and then come to the bench and mark with a Sharpie.
I mark with a Sharpie because a Sharpie seeps into the wood
and tells you to remove more wood.
If you just mark with a pencil,
you're barely taking any wood off
to get that pencil line off.
And then you're not adjusting it enough.
In the beginning, after floor tillering,
we're going to use a Sharpie to remove wood.
The other thing with a Sharpie
is you want to mark all the way across the bow
so you're removing wood evenly.
So even with a scraper,
I tend to mark the area I want to remove
and then I come over to the bench
and then I can mark lines all the way
from the left to the right of the limb.
That way I'm removing wood evenly.
Continue on tillering with using a Sharpie as your marker
until you hit the last 10 inches of your bow.
So if your goal is a 40 pound pull at a 28 inch draw,
you'll want to stop when it takes 40 pounds
to pull back an 18 inch draw.
That way it's 10 inches shorter than your finished draw.
Let's go to a pencil to remove wood
because now we're fine tuning it.
Drop from a Sharpie to a pencil on those last 10 inches.
That's what I recommend.
If I'm honest, I only do it probably
on the last five inches
and that's due to impatience and practice.
It has probably caused me a bow or two here and there,
but if you're feeling a little risky,
you can use a Sharpie further on.
The problem is with a Sharpie,
you're going to remove more wood in an area
which can make it easier to over-correct
and then have to over-correct
and you don't want to over-correct
all the way until your bow's done.
It would be nice to be five to 10 inches
until you're finished draw weight and the tiller's perfect.
So now I just got to remove wood evenly
that's the way you want to go
rather than over-correcting back and forth.
So my recommendation is when you get to the last 10 inches,
then move down to a pencil
and you'll just be removing less wood.
The more control you have,
the better chance you're not going to screw up the bow.
But if your tiller's looking really good
and you're halfway through tillering,
I would continue personally with a Sharpie
because the tiller already looks really good.
What you don't want to do is have the tiller off
and then have to over-correct back and forth.
So just be careful with that,
make your own judgment call based upon your skill level,
how good of a bow you want to make and everything
and how much time you have, that's a big factor too.
But if you're really wanting to make a really good bow,
taking your time is generally the best way to get there.
The other thing you can do is count.
So if you are coming from the tillering tree
to go remove wood with a scraper,
I'm going to say, I'm going to do 10 scrapes
on this side and on this side.
That allows you to keep it even,
especially if your tiller's looking fantastic
and you want to remove even parts off of both limbs,
count your strokes with the scraper
and you can remove 15 strokes with a scraper off each limb
and that's going to keep you consistent.
But if you do that counting,
it really can help out a lot
with knowing how much wood to remove.
And finally, we're getting close to finishing up our bow.
So we want to slow down the closer to the end that we get.
With that being said,
I never take the scraper to my poundage at finish draw.
Wait, stop one inch early,
which is going to be two to three pounds lighter.
So what that means is when your bow
is at 40 pounds at the 27-inch draw,
when you're looking for a 28-inch,
stop because two things will happen.
One, when you go to sand your bow to do the final sanding,
it does remove some wood,
therefore your tiller or the strength of your bow
is going to drop just a little bit.
The second thing is string follow is going to happen.
It just happens.
Some materials more than others,
but this can reduce the speed and the poundage of your bow.
So if you stop one inch early after you shoot a hundred shots
I almost guarantee you it's going to be dead on.
But if you stop too late or right at it
and you hit a 40-pound bow at your 28-inch draw,
that bow is going to end up
probably at 37 to 38 pounds in the long run.
The one other reason you'll really want to stop early,
and we'll get into this more later,
but that is to shoot the bow
before you call it done on the tillering.
I find that one of the best ways to tiller
is to literally shoot the bow
because then you can feel, is this what I like?
And then you can make adjustments based upon that.
We'll get into that later on,
but stop one to two inches early on the draw length
at your desired poundage.
And that's my proven method to have enough speed
with enough control to allow you
to tiller a bow successfully.
All right, we've got a whiteboard recap summary this time.
So step one is floor tillering.
That's the four to six inches.
Bending roughly, you just want it smooth
and bending correctly or evenly.
Feel free to use aggressive tools at this process.
Now the next part is the bulk of tillering.
That is gonna go to barely bending.
Then we're gonna take this very close to the finish.
Remember, the last five or 10 inches,
switch over from a Sharpie to a pencil
so that you can have control.
And then step three, we're gonna stop one to two inches
short at your desired draw weight.
That way you give yourself time to shoot the bow,
make sure it's what you like,
to sand the bow, that way it's smooth,
and for string follow or a little bit of set to occur.
So that's how you know where and when to remove wood.