Audi S3 8P - Fitting My Full Cobra Exhaust!

MotoAdventuresYT
21 followers
9 Video Views·Jan 31, 2021
Exhaust Link - https://cobrasport.com/collections/audi-s3-exhaust/products/audi-s3-8p-3-door-turbo-back-performance-exhaust?variant=32120282513489
Instagram - MotoAdventuresYT
Facebook - MotoAdventuresYT
Twitter - YT_Motor
YouTube - MotoAdventuresYT
Thank you for watching! make sure to subscribe for more videos on this!
Comment down below and let me know what you think about this video as well as what you want to see in the future!
https://www.patreon.com/MotoAdventureYT
https://www.instagram.com/motoadventure
https://www.facebook.com/MotoAdventur...
https://twitter.com/yt_motor
How's it going guys and welcome to a new video and this is going to be the one that we've all
been waiting for and that is getting the Cobra system on. So I'm going to go ahead
jump straight into it and show you guys how it's going. So yeah guys we've already started cracking
on got the car jacked up and we're going ahead and getting the induction kit off so we can get the
back panel off. This is Andy he's going to be giving me a hand during this whole thing
and yeah hopefully this goes as smooth as it'd be nice to be. So yeah we're just going to go
ahead get the induction kit off, get that panel off and undo the bolts for the downpipe
and then we'll get the car all up on jack stands and go from there.
So we've got the intercooler induction kit off and we just sprayed the downpipe bolts
which are there. This is going to be a bit tricky than when I took the actual original
downpipe off the old one because this has caps. We'll go ahead give it a go and once we get these
what we can loose we'll get the car up on jack stands and go from there.
So we've just got it in the air. I'm gonna go ahead get all the jack stands on and then
go ahead and start cracking off the exhaust. We've done three bolts of the downpipe hopefully
we'll be able to get to the last one under the car and then we'll go from there. So we're just
taking off the center bracket now and then we're gonna go ahead and drop it. Should we drop it from
the back or the front first? Back. Yeah so then it's just these bolts here that take the hanger on
and then there's just a couple more hangers and then hopefully we should get this all down pretty
fast. Okay so now I've got the rear exhaust brackets off. I'm gonna just go ahead and get
in the rest of them off and we're gonna quickly take the center clamp off so we can get this half
off and then take the lambda sensors out. Hopefully drop it all after that. Okay so we've
come to the conclusion that these bolts up here are completely rounded off so I'm gonna go ahead
and get the grinder and just grind straight through this clamp and then hopefully should
be easy enough. So we've got the rear of the exhaust. That's it so we're good to go.
So now we just need to deal with this downpipe and lambda sensor. Okay so we just have to pull
down this plastic protector just so we can get the lambda sensor wire and unplug it so we can
get the lambda sensor off and then we've obviously got that mount off down there as well,
two 13mm bolts. So yeah we're almost there. Okay so in order to get the downpipe off you need to
take the prop out so it's three bolts, spline 10mm, move it to the side and then we can drop the
downpipe so it's a spline 10mm like that and then once they're all out you want to pull it
towards you and move it to the side and then get the downpipe out. Okay guys so that's it now the
whole exhaust is out. Can I just say that this downpipe is definitely yet again another job
that you definitely need to have some patience for because I couldn't get to the bottom nut
very easy at all. It took me ages to get it out and then when it was out I tried to get the downpipe
out and then realized that I needed to take the lambda sensor out and to do that I need to put it
back on the threads to hold the downpipe so I can get a good grip of the lambda sensor but anyway
it's out now, whole system's out. Thank god. I just need to swap everything over now like the
exhaust mount and then we can go ahead and start putting the new one on. Okay guys so it's time
to put this big ass chunky boy on. I believe this is a 3-inch Cobra downpipe. I can't really see if it is a Cobra
not really any brand that I can see but I'm assuming it's Cobra. This is the gasket I'm
going to put some exhaust paste on the gasket and hopefully it'll stick to the top here and
hopefully, fingers crossed, touchwoods that it's going to be a straightforward fit considering this
does not have anywhere near as many cats as that one did. Well this has none so. Okay guys so my
torch has died and it's currently on charge but I've got the downpipe on. You guys can't really
see a lot but basically I'm going to be putting the prop shaft back in now and then go ahead and
get the rest of the system on. Luckily, luckily it's got that. That is just the hardest part.
The downpipe is the hardest part of this whole thing but hopefully now it should be pretty
straightforward. Andy's had to leave so I'm doing this on my own now but I'm sure it won't, it would
just take a little bit longer but I'll still get it done. Okay so downpipe's on, prop shaft is now
bolted in, everything looks good to go so we're gonna go ahead put the bottom exhaust mount here
and then start putting the extra pipes on and get the lambda sensors in. Okay, okay, right
so now is it back box next? Back box. Keen. Okay so back box is going on, I've just put the
bracket back on here, I've also got the valves mechanism for the valves on the standard exhaust
off. So now we're gonna go ahead and get this fitted off and then we're just gonna put all the
nice new clamps on. Well, oh yeah there you go, it's a clamp on the end there and then yeah.
Okay guys so lambda sensor is in, whole exhaust is now together, show you guys the back,
got my big tips back thank god and they're solid as well, not going anywhere, they don't
stick out too far either so pretty good. Okay guys so finally got the whole exhaust on,
all brackets are on, all ready to go, ready to basically be started. I'm gonna head start
now while it's on the jack stand so we can see if there's any leaks. All right cool,
you want to do yours? Really? As long as it's out of gear just crank it yeah.
Check for any leaks and then get back to you guys.
Okay guys so it's completely done now, I hope you guys enjoyed this video
and I'll go ahead and see you guys in the next one.
