ZULU SAILING Refit Mountgay 30 Saisonrückblick Winter 17_18

Zulu Sailing
4 followers
3 Video Views·Nov 15, 2022
Before went out we had to raise the mast of our soul for
the first time That was actually an excitement for me
The mast came out of the deck exactly straight centimeter by centimeter
That was all the crane could lift
When we had finally set the mast and used it on
the deck she was still sad for a few days
Before we could lower the mast on the daily exchange rate
Here we go
Ah it's hanging on the hook
For the first time we already see the soul underwater It
is not as bad as we had imagined
but outside it is pleasant
It is better than in the atmosphere The
crane itself then went quite quickly When
she was roughly hanging in the harness from the trailer the harness was pulled
and were happy that everything fit so well
Also the trailer was now new
The boat and trailer have now met each other for the first time
Then they went a few hundred meters over to the club grounds
But we could not go directly to our winter camp because
unfortunately despite the agreement were then told
at the mast must not stay on the boat and he still has to take it down
That gave us quite a bit of time pressure
and had to do it in the pouring rain
We believe the screws had been rusted in there for 20 years
It was by no means easy But we managed
it Then went to our
winter mooring spot
The Sulu had to be quite thoroughly maneuvered but
our crane drivers and all the other involved parties
They really have a good eye and a lot of feeling for their vehicles
A big compliment to them in case they ever hear it
Then it was time for the actual winter work
We can only show you symbolic images of it
because we didn't have a camera there for all the dirty work
And so you only see the relatively beautiful sides of winter work
But I can tell you at our place mowing did not work
Max stripped the entire underwater ship This is not a
nice job Whenever the weather
was good went to the boat
and worked on what was needed here
I polished the hull
Actually that wasn't even on our winter to-do list
Truly he didn't look good and he was quite plump
but we actually had plenty of other things to do
At the Boot Düsseldorf I had
participated in a tender and there
we won a set of polish Once with heavy polish paste and wax
That was the necessary Astrid so we had
decided after all that we wanted to do it
In retrospect I must say it was truly worth it
The hull looks really good again now
and it gives the feeling of having done something for the preservation
But it was exhausting
Without the machine I would have had no chance
This was probably not done for many years
But it was not only polished
Some filling was also done
Risse planed dried and checked to ensure everything is fine
To our delight the boat has no osmosis
There were no really major
issues just a few minor
touch-ups Max sanded the entire underwater hull
and soft as a baby's bottom
Phew this ship is so long
I've barely gotten through the first page
Well at least
Max isn't doing any better either
But he makes himself as comfortable as he can
Yeah yippie let's go to the other side
Do it all again this time from front to back
A day before it goes into the hall
Helps Max me still with the body polishing
Because we want to have it done before
It works even with the flex at the lowest speed
But it still sprays a lot
And in the boats the hall is already a bit closer together
And we didn't want to make ourselves unnecessarily popular
Also we had our one winter camp neighbor
The one standing on the port bow has already calmed down and
he had come to terms with a few splashes on his teak deck
In short they really stepped up the effort and
made the Sono shine Here'
s another before-and-after
Look at how greasy she still is
And then how beautifully she shines
So it definitely was worth it
While we humans are working
so hard one is especially
bored our cheeky one Suddenly
an old Fender has to do
And it keeps them busy all winter long
A very affordable and practical solution
I can only recommend to all dog owners
Look the body is already
sanded How nice he looks
Okay maybe he kind of looks a bit like a map
But that's just how it has to be
He is Babypopo smooth I promise you
Now he just needs to be completely fished out three times with spirit
So that no fine grinding dust remains on it
which can hinder the adhesion of the paint
Then the color is finally mixed
We have chosen a two-component paint
A total of seven layers must be applied
Five coats of primer two coats of anti-fouling
Also let's go
Oh now she's finally sexy again
Admittedly she still looks a bit sleepy
With a bandage on her nose and
a tarp on her head but she's back to being really cool
And since it was a bit loose in the straps
and were afraid that if we just took it off
It tilts forward and backward we bought construction supports from the hardware store and then
she had to alternate constantly
lifted up in front and at the back so that she gets
all the color layers under the
belt That was a time management
and sometimes it wasn't quite
so easy but the work was worth it
Let's go into the hall and
Hamburg lives up to its
name on this very day It
has really been raining
That was no longer just rain
But regardless a real sailor has oilskin
That's why we also left the roof on
and it was not removed beforehand
Because we are going into the hall
to seal all our leaky deck fittings
If we had removed the roof first the stuff
that's already dried in the winter camp would have been ruined
It just got wet again in a few seconds
Let's start with the shunting
The Sulu should go back to her place
But there
Stop
There's another rolling block system above the hall ceiling
Fix climbs up the ladder and looks
But everything fits But
better to call a stop once
more Better safe than sorry It has
become too expensive for us
Quickly the Sulu is in her
place and the work begins
Chaos breaks out immediately aboard
We removed the railing and all external fittings
such as genoes tracks clamps and fastening eyes
What the boat has all so has
Under the deck it's not much better
either This bright white box that
you see on the left there that's actually where our tank is located
He is currently out of commission and on a sealing course
Oh by the way
By the way we bought a banana boat
We are really looking forward to testing
it in the summer The old
windows have already been removed Now the old sealer needs to be removed from the frames
It's really not fun at all
But with the Proxxon it goes relatively well
The only disadvantage is
That the wire brushes lose their
wire parts over time and
that you then find them everywhere in your clothes for several days Not at all nice
This is terribly painful
Switching the toilet's flush valve was just as great But
that had to be done too Max
once again behaved very bravely
It's time to start installing and sealing again We have
chosen a combination of Farco sealing tape and Seekerflex
The sealing tape goes around the outside and makes the curves clean
Despite that Seekerflex still gets
in Especially into the screw holes
Both on the deck and on the part itself
Here is our Rillings basket
This allows you to make a very clean sea stitch
Under the deck it looks like this It
is also not really more comfortable Especially
at the front of the
boat That was not my favorite at all
I had to go through proper yoga sessions there
Of course we didn't only work on the deck No
work continued on the underwater hull Whenever
the paint needed to dry there
But it continued above deck
So we did reach our destination relatively quickly within about two weeks
We chose neon yellow anti-fouling for the keel and rudder
Firstly because it simply matches her
And also if she happens to turn around and
a helicopter starts searching for us they would better able to find us
Just a little bit of bought security
And in between something also has to be done for the university
Only working at the boat is boring so
our car has also come up with something
So were able to fix the car after a long day on the boat
Our boat windows arrived just 48 hours before our crane appointment
and also the wood for the frames
Actually we didn't even want to do the window theme this winter
Just as little as polishing the body
But upon closer inspection we couldn't help but admit
that the quality of the windows is simply no longer good
And so we also did it right away
Our boat disc supplier did everything correctly
and really did very very fast and good work
But the HL took a total of 2 weeks for the round-trip shipping
And that made everything very tight
So they worked through the night until 3 a m
sawing marking sanding and everything was sealed
Since both sides had to be completed
at the same time we simply attached
them in sequence This allowed them to dry and be installed the next day
Also theoretically
Finally there were not enough screws
What a nuisance
We finally found a dealer on the day of the wreath
who had the right screws
But we ended up deciding to
Without raising the windows
because the weather in Hamburg
was unusually good and then they installed the crane
The next morning they went down to the basement The whole lot of stored items was
being woken from their winter hibernation
In the winter Max had tidied the basement
So I had quite a bit of searching to do But it was fun
finally getting out the Fender
and the mooring lines again
Our appointment was at noon
Before that we put on the home harbor and our club
Does it strike you how unassuming
she looks so tidy and with a
railing as if nothing had ever
happened Let's go to the crane
She had been on land for almost exactly half a year
We have postponed our due date twice
Today is the last crane appointment for our club
So our winter work is now sunk
and can no longer be seen How we
did the rest such as measurements
installing windows summer work
You'll see that next time
