Wheel Throwing Slow Feed Dog Bowl

Sculpture Work
8 followers
5 Video Views·Feb 14, 2026
Hello! Today I am showing you how I make a slow feeder dog bowl,
and I did mess up one time, so you'll see how I fixed it as well.
So first I'm going to start by throwing my ball of clay down on the wheel. You want to throw it
down firm enough that it's not going to start moving whenever you start the process of centering.
So this is me centering the clay. I'm coning up and down. This is a larger piece of clay,
so it can be difficult, but luckily my clay was a little bit softer today.
So I'm just going to keep coning up and down, making sure that it's completely centered. It
looks like it's pretty centered now, so I'm starting to form it into a puck shape. And
what I mean by a puck shape is just something that's kind of flat and looks just kind of like
a hockey puck. So I'm starting to compress the clay a little bit here too, and by compressing
the clay I'm just ensuring that it's going to be a nice stable base. It's not going to be prone
to cracks or anything like that after I'm trimming it and done firing it and all of that stuff.
So I'm just gradually working the clay out. I'm also being careful not to form a mushroom shape,
and that's whenever the clay folds over on the top side as you're compressing it outwards.
This is sort of the start to plates as well, where you're sort of just pressing flat,
compressing the base a lot, and gradually working the clay out to the edges of the bat.
Now I'm just going to be cleaning up the bat here, scraping away any excess clay or slip,
soaking up any water with my sponge, and then we're going to keep on compressing outwards.
This can be kind of challenging, especially with your hands. Sometimes people use a rolling pin,
like a wooden rolling pin, and compress the clay that way by just pressing straight down
with the pin, but here I'm just using my hands. The key here is to just keep on pressing outwards
and not forming a certain hump or raised area on any part of the clay. We're just
trying to keep it as flat as possible as we're enlarging the clay. One giant hockey puck you
could say. Now I'm just measuring it. I'm making sure it's about standard to the other ones I've
made in the past. Normally I do it anywhere between 8 and 9 inches in diameter. It's going
to be a little bit bigger as you're throwing it as well, because the finished piece always
shrinks a little bit from the size that you actually made. Now I'm going to start opening
it up. This is a little bit different from other pieces, where I'm not really opening it up to
create an inside per se, as if you're making a cup or anything like that, but I'm more just
looking to make some ridges to fit all of the dog food in, or cat if you want to use it for a cat as
well. I'm just using my fingers to gradually make ridges. I can always make them a little bit deeper
later. I can always clean up the ridges later, but for now I'm sort of just marking where I want
these ridges to be and how wide I want each of them to be. You can see the rims of all of these
pieces are still not smooth, a little uneven, but that's completely fine right now.
You can see here as well where I start to mess up the outer ring. It gets a little funky for a second,
but it's okay because we can fix it. I'm just taking off any of the excess clay that I have
there, and then you will see that I'm going to just smooth it out, clean it up.
A lot of things with pottery you can end up fixing. If anything's too far gone it's normally
not worth fixing, but in this case it worked out where I can kind of squeeze those two rims
together to create one external rim, and then I'll eventually start cleaning everything else
up from there. Now you can see I'm pulling just as if you're pulling walls of a mug or a tumbler
or a bowl. We're just pulling evenly, and I want to make the outer ring a little bit taller than
the internal ones because that's going to be the external wall of our bowl, and we want it to be
able to contain everything else that we put within. Now you can see where I'm making these ridges a
little bit deeper, and at the same time I'm pulling each of the internal walls up a little
bit. I've gotten a lot of feedback from people wanting the ridges to be deeper. That way it's
even harder for their dog to get to their food, so that's what I'm trying to do here. Make sure
it's truly a slow feed bowl that prevents dogs from gobbling everything down super quickly.
You can see I'm also starting to clean up the ridges a little bit, so we're smoothing it out
and they're not as rough anymore, and it's looking pretty good. I always use plenty of water just to
make sure everything glides very easily in my fingers, and then we also want to make sure each
of the edges of the rims are smoothed out enough that there aren't any sharp pieces. Remember dogs
are going to be eating from these, and also sharp ridges have more of a tendency to chip off either
in the dishwasher or during any of the other making processes before I'm even finished with
final firing. Alright, everything on the inside is looking pretty good. Now I'm just going to
smooth out the outside a little bit more, and then this is a crucial step with all of my pottery. I
always cut off the rim once I'm complete with the throwing process. I cut it off, that way it's nice
and level, and then that way whenever I turn the piece over later on to trim it, it still
lays nice and level on the wheel head so that my bottoms don't get all wonky and uneven or anything
like that. Now I'm just cleaning up some final touches, making sure there's no extra slip or
clay pieces anywhere, no rough edges or corners, making sure the size of everything is nice and
good, and then we're just going to clean up with our sponge. Soak up as much excess water as we can.
It can be a little difficult to soak up water between the ridges, so sometimes I'll do my best
of soaking up some excess water, but other times I'll just kind of leave it. And then I like to
take this sort of pointy triangular tool, I don't know what it's called, but I like to take it and
just scrape off the bottom edge or bottom corner of my piece. That way, again, it just helps with
the trimming process later on because it's already started to be trimmed. See, here's where I take
my sponge and I'm trying to soak up a little bit of water. Again, it can be difficult just because
the rims are so narrow, but that's totally okay. Doing some finishing touches on the rims, making
sure they're nice and smooth for our little animal friends. That's looking really good.
Now I'm just going to take my wire tool and cut underneath the piece. This just helps me get
the piece off of the bat later on. Even if I still have to wire under again in the future,
it's going to be a whole lot easier.
