Upgrading Slot Cars (and building a 200ft track)

Tech Boss
138 followers
15 Video Views·Dec 7, 2022
In this video you'll see how I made these tiny FPV model cars and then raced them around a gigantic
60 meter race track that goes down the stairs, out of windows, through tunnels and even outside.
I had a few slot cars when I was younger but they never really reached their true potential.
Each must have done many real world miles over the years but they never actually went that far.
For that reason I wanted to finally realise my childhood ambition to build a truly massive
But I didn't want to just build any old boring track. This one would make the cars face many
perilous obstacles such as stairs, real cars and the infamous British weather.
Yeah I'm not sure if this is going to work.
The biggest issue though was how myself and my opponent would be able to control
both of the racing cars all the way around the circuit without being able to actually see them.
The solution was where things would get really interesting though as I found racing these tiny
cars from the perspective of being shrunk down to their level was even more fun than I could have
imagined. Oh this is so good. A slot car is a very simple thing. Before video games these small
plastic vehicles were the closest you could get to driving a real racing car from your living room.
They're powered by a small motor and are guided along the track with these guide vanes. Power for
the car's motor is carried through metal strips next to the groove in the track and is picked up
by contacts alongside the guide vane. The voltage is varied by a resistor in the hand controller,
to make the car speed up you squeeze the trigger and to make the car slow down you release it.
Very simple stuff but even as adults it's a lot of fun to get together and stage a tournament
and see how competitive people get.
So how could I take the humble slot car to the next level using some 21st century technology
to make it suitable for my ultimate track? Well I'd need to be able to control the car
on its long journey going from room to room and out of direct line of sight.
This track is going to be very long. I think the best way to get around this problem is to create
a first person view system, FPV system, on the cars. Just like in Formula 1 we're going to have
a small camera on the car and that's going to transmit video to a receiver and what we're
going to do is receive the video and play it into a pair of video goggles and this way we'll be able
to drive the cars like we're actually sat in them, like we've just been shrunk down and miniaturized.
At first I just used some old gear that I had lying around from past projects but this was a
little too big for the slot cars. Next I ordered a couple of new micro cameras and video transmitters.
These are three-in-one systems that contain the camera itself, the video transmitter which
transmits analog video, and the antenna. But how was I going to power the cameras on the cars? Well
initially I thought about powering the cameras directly from the track but I thought this might
cause some issues such as what happens when the car is stationary with no voltage being applied
to the track. There are many ways I could have solved this problem through building some sort of
energy storage system on board with capacitors or something but instead I decided to just delete the
problem and instead fit small batteries that are strapped to the top of the cars. But how long
would each battery last? Unfortunately these tiny video transmitters are actually seriously
power hungry and make the batteries last just five and a half minutes before dropping below 3.2 volts.
This was okay though as I had lots of these small one-cell batteries and the cars might just need a
pit stop or two to change batteries halfway through the race. Now it was time to set up a test track
and I soon found that driving the cars like this from the cockpit was a lot of fun. It feels just
like a very fast video game. It's not at all like driving a real car or anything but it does feel
like you're right there sat in one of these models hurtling past plug sockets and 3D printers at
ridiculous speeds. It's a real challenge for your reactions. So we've solved one big problem, now onto
the problem of building the track. How would I build bridges and make the cars travel upstairs?
This Scalextric track is quite flexible when attached together but I was interested to see
whether it could support itself and make free-hanging bridges. With a bit of tape on each
end it could and it seemed that the cars could run along it quite easily when at speed. The cars
would tend to get a bit stuck though if the angle between track pieces was too aggressive. Go too
slow over these pieces and the cars would bottom out so minimizing this would be ideal for reliable
running. Okay so I knew that the cars could get across bridges quite easily but what about hills?
What was the maximum angle that one of these tiny cars could drive at without losing traction and
slipping back down again? Well I had a feeling that they'd go at some pretty extreme angles
actually and that's because these little cars are equipped with a secret weapon, downforce. Yes
that's right these cars use magnets to create some sort of simulated downforce for better grip on the
corners and more traction when accelerating. Without them the cars would fly off much easier
when going around a corner. As these little mini cooper cars are so small and light the magnets are
actually extremely powerful. I started testing the mini at 20 degrees and that was no problem
whatsoever. At 45 degrees it was just the same story and amazingly at 90 degrees the mini could
still get to the top and was seemingly unstoppable until I dropped it. Whoops! This was where I found
another problem. Just like the real original mini these cars are quite fragile which suggested that
any big crash during the race might result in a DNF so both drivers would have to be very careful
when going over dangerous obstacles. While talking about ways to kill a slot car what would happen if
it rained? I wanted the track to involve an outdoor section but with rain being likely for the day of
the race I was keen to find out whether slot cars could race in wet conditions just like real racing
cars can. Firstly I ran an unmodified old car up and down a wet track several times and it worked
just fine. I decided though to take extra precaution I should coat the electronics of the minis with a
is great for protecting exposed connections and making sure that water doesn't get into anything
sensitive. As the FPV gear is definitely not waterproof I covered the camera and transmitter
in it too, being careful to avoid getting any on the lens of course. Now I could be confident that
the cars could speed through the rain all day without an issue. One thing you might be thinking
about building such a large track is will there be enough power for the entire thing? Well I was
wondering this too so I measured the resistance of a length of track and multiplied it by the amount
of track I had for the circuit. The drop wasn't that significant but I decided that I should
probably double check by assembling half of the straight track I had to see if there was a
noticeable lack of power at the far end. Thankfully everything seemed just fine and the car had more
than enough power even when 30 meters away. The FPV footage was also crystal clear with no breakups
even when absolutely flooring it at maximum speed. Right before I show you how we built the track
firstly it's time for a very quick ad from the sponsor of this week's video Established Titles.
Established Titles is a fun and novel way to preserve the natural woodlands of Scotland
while helping global reforestation efforts. It's a project based on a historic Scottish custom where
landowners are referred to as lords and ladies. Title packs give you at least one square foot of
dedicated land on a private estate in Eddleston, Scotland and an official certificate with a crest.
Your certificate features a unique plot number which means that you can see the exact location
of your land. They plant a tree with every order and work with global charities One Tree Planted
and Trees for the Future to support global reforestation efforts. You can even officially
change your name to lord or lady if you wanted to and get it on your credit cards, plane tickets and
that kind of thing. They even have couple packs which come with adjoining plots of land so that's
nice. It makes for an amazing last minute gift and Established Titles are actually running an early
Black Friday sale. Plus if you use the code PROJECTAIR you'll get an additional 10% off.
So go to establishedtitles.com slash projectair to get your gifts and help support the channel.
Thanks very much to Established Titles for sponsoring this video and now here's how we
built the track. All right the day is here. I'm going to be joined by this person. Of course I
need a competitor so we've got Matt here. That's me. And now we're going to set up the slot car track
so we can have a good old race. Right a tour of the track and its many obstacles. So let's build
this thing. First of all we've got the staircase. We know that the cars can travel almost vertical
so this should be no problem whatsoever. Twisting around the circuit we go into the other bit of the
building which is the night stage. This is where the cars shoot down a straight going as fast as
they can through this shelving unit. They'll come out of here straight down here into the
garage section and this is where they will shoot out into the blazing sun and right underneath the
real life counterparts of these little cars. Then we'll be going through this car park
and back through the front door. Now this is the interesting bit. How do we get back up here? Well
we could just go straight up the stairs but I think it would be more interesting to, seeing as
though we know the cars can go vertical, to go straight up here and over the top. Once we get
over the top we'll go over a bridge. The bridge will take us over here to this side of my original
office and then they'll be hurtling straight over the start finish line and yes go for another lap.
And I forgot to mention we've also got this which is a jump. So I think we should put that on the
start finish line because I think that's where we might come off quite a lot and we won't want
to walk very far. It's going to go straight off onto the floor isn't it? Great. Lost it. No. Whoops.
Right, time to start laying track around the office. With the main workshop section done we
started to extend the track out onto the staircase. Matt working on a makeshift bridge to the vertical
ascent stage and myself working on the stair descent section. Matt made use of some foam
board to support the track pieces and held them aloft with a stool and a tripod. A nice improvised
DIY solution. We were making fast progress but it wasn't long until a problem emerged with trying to
build such an extreme track like this. Just watching out for the connections because sometimes they go
like that with the pressure on the track. This problem meant that we had to keep testing each new
section to catch these separation issues. Beautiful. Okay you might have to practice that.
Once we'd fixed this it was time to tackle the most ambitious and equally most unprepared part
of the track. The vertical ascent. Yeah I'm not sure if this is going to work. Are you ready to
lower this thing a bit more? It was at this point we realized that we probably should have thought
about this a bit more ahead of time. It didn't work. It broke. Yeah that's what we were expecting.
We could have taped the track together or maybe screwed it to some wood lent against the wall
but also the angle of the track pieces was too aggressive and the cars would be traveling too
slowly at this point to get over the joins without stalling or falling off. And falling
off here might be game over. So how's it going Matt? We've got an alternative solution now haven't we?
It's much cooler the new plan. So instead of having a crazy super steep unrealistic ramp
we've got now a hill climb. So the car is going to come in through that window
and the route will require you to climb up the hill. So that's the hill climb section.
And then back down again. The rest of the track went together very quickly and it wasn't long
until we had some pretty cool features all connected up ready for a test run. The tunnel
section was pretty cool as were the track side led light strips. We even made use of a real car
to raise the track up into the window. So we've done. The last section through the car.
One piece remaining. One piece remaining. Can you believe that? We did it perfectly. How is that possible?
We needed to see if the cars could make it the entire way around with no issues so we decided
to do a few practice laps. Leaving the office firstly we have daring descent where the cars
will go bombing down the staircase. Carefully navigating a tight left-hander. Next there is a
very fast straight going into the Monaco tunnel. Following this we have tyre turn which leads into
the appropriately named Cooper corner. And this bit of track features a crossover so both drivers
will have to be extra careful here. Next we have a ramp called uprise which allows the miniature
cars to power their way back into the building through the window and then up the hill climb
which takes them to the office which features another crossover. And then finally we have the
jump of doom just before the finish. Oh and we did that cross the line. Now it was time to put on our
racing goggles and get ready to race the biggest slot car circuit Matt and I had ever seen. Okay
it's time to race so which car do you want? I'll go for the white. Okay Matt's on the white car
I'm on the red car and as we know this track is quite long so if one of us falls off then we're
going to be at quite the disadvantage. Try not to crash Matt. After all that preparation, testing
and track construction it all came down to this. Who would win? Would both of us finish? On your marks,
get set, go! Both cars were away myself heading the charge down daring descent but Matt wasn't
too far behind and soon he would take the lead at the Monaco tunnel. Momentarily I got ahead
until Matt dived down the inside like an absolute madman.
Matt pulled ahead as my car struggled up the hill climb and back into the office.
Oh I'm right behind you. Come on. I see you just ahead.
Whoa daring descent got a bit faster. Oh I'm right behind you on daring descent. Matt was still ahead
so I knew I needed to really put my foot down or finger down to catch him on the straights.
Oh it's raining. Oh no. I thought you stopped or something because I couldn't hear you.
I'm going up. Oh no I'm stuck. Oh no Matt. Well I'm going to gain a bit here.
With Matt stranded in an awkward position I managed to pull out ahead but Matt had soon
nudged his car back into action and I was feeling the pressure. I could have eased
off but made a crucial mistake at daring descent. Oh no. I'm following you down.
Matt had taken the lead but then came a cropper on a dodgy bit of track.
I'm gonna make some ground.
Now I was in the lead again but with half race distance coming up it was time to make a pit stop.
Oh no. Crushed off the circuit. With my car falling hundreds of scale feet onto the studio
floor I'd broken my camera mount so needed to quickly hot glue the camera back into position.
Meanwhile Matt had closed the gap and came in for the undercut.
Are you doing a pit stop? I'm doing a pit stop. Pit stop made. Pit stop made? Yep.
Got a new battery in my car. I'm changing my battery. I'm way behind. My pit stop's very slow.
This gave Matt a big advantage and he managed to pull a very decent gap.
You're a lap ahead of me almost. I'm going to get behind you. Here I am. I'm going. I'm going.
I sort of can't get past you. Come straight. Let's go. Yeah. Oh my god.
With this being the penultimate lap things were hotting up even more.
Matt is way in the lead right now. They're in descent right now.
Okay I'm going around the office to uh over the jump. Oh what a jump. Oh no.
Oh yes. This gives me a chance to retain the lead. I just saw his tubes.
Where are you? Cooper corner. I'm still not quite behind you. I'm not quite. I'm not quite.
All right. Let's go. Oh come on. I need to put the beans down here.
And I'm on the hill climb now. Coming into the studio. I'm actually. Here I go.
I'm actually trying to really chase you now. I think we've only got one more lap to go after this.
Oh and I'm in the studio too. Oh no.
Yes and I take the lead. I was neck and neck on the final stretch. I couldn't believe. I can't
believe it was so close. This was the final lap and unbelievably we were still trading places
until Matt took the inside line on his route to victory. Oh yes. Matt roared into the lead at
uprise and with my car wheel spinning up the hill climb surely my chances were shot. But then
last minute drama. Oh no. I think I've lost. I did not. I got past it. There we go.
I think you won that. Wait who actually won? You actually went across the line last time.
I came off the ramp. You won. I won. Yeah. No. That's so unfortunate. I came over the floor.
Matt just fell off on the last obstacle and I managed to beat him by like that much. Literally.
I'm so sorry about that. I feel like that was completely unfair but.
And then you go and do it. That was so good. I can't believe that's on the camera.
That was such bad luck for Matt just falling off at the last corner. Well the last hurdle I mean.
Literally the last hurdle. The last little obstacle that we had here. And I was just
behind him so I managed to just clench victory from the jaws of defeat there. Yes good race.
Yes cheers. I'm exhausted. Me too. If you like this video then here's another one that I think
you might like and also thank you very much to my Patreons of course for helping me to
actually get all of this track for this video. If you want to support my Patreon there's a link
in the description and there's also a link to my new website where you can find my
new downloadable project kits. Thank you very much and I'll see you on the next video.
