Tuyệt phẩm bonsai, hướng dẫn setup hồ thuỷ sinh - Quoidecor

Hello everyone, today I will continue to set up a swimming pool. Here I have a swimming pool with a diameter of 80 x 35 x 40 cm and a height. With this swimming pool, I will set up a bonsai tree. But not a bonsai tree in a stream. The main part of this structure is a very large bonsai tree. Let's focus on this pool. This pool is about 80% of the area of ​​this pool. Now let's continue to follow the process of setting up this pool. Now let's make the layout. I will use this sandstone to make a bonsai trunk. And here I have a pine wood to make a bonsai tree. And this pool is mainly made of bonsai trees. So I will make this bonsai tree to make it beautiful. Now I will put a hole in the pool to see how it looks. Now I will cut this hole to make it fit the shape and size of this pool. I will use this pencil to mark the positions I will cut later. After cutting a little, I will put it in the pool to see how it looks. I will continue to mark the places to cut. This bonsai tree body has not yet been cut to the desired shape. So I will cut it a little later. This part is a bit big, so I will cut it off. I will cut this branch right here. Cut a diagonal line down here. I will have to cut and fix a lot of branches to make a beautiful bonsai tree. After cutting, I will put the hole back in the pool. I have cut the top of the tree and the branches that are in the pool have also been cut. Now I will put together another group of firewood to make a tree trunk. Now I will stick the tree trunk. I will use a piece of foam to connect the two pieces of firewood together. I will stick another piece of firewood here. Now the shape of the tree has been formed. It is exactly what I want. I will not put this piece of firewood below. I will use a piece of black stone to make the corner of the bonsai tree. Next, I will put together the pieces of firewood inside the tree trunk. I will continue to use the foam to make the connection between the branches of firewood and the trunk of firewood. Please note that the firewood must be dried. If the firewood is wet, it will not stick. After sticking all the pieces of firewood, I will use a pair of scissors to cut the pieces of firewood. I will use a pair of scissors to cut the pieces of firewood. The top of the bonsai tree has been completed. Next, I will make the bottom of the bonsai tree. I will use a piece of foam to connect the two pieces of firewood. When you put together the pieces of firewood, you can do it freely and comfortably. You can rotate the pieces of firewood to find the best angle of the pieces of firewood. After putting together the pieces of firewood, I will glue the pieces of firewood together. I will use a piece of foam and glue 502 glue. I will glue the pieces of firewood together. Next, I will glue the branches of the bonsai tree. I will glue the branches of the bonsai tree together. I have just finished completing this bonsai tree. However, the layout of the bonsai tree has not been completed yet. There are still many points to improve. Let's continue to follow the process of setting up the bonsai tree. I will glue the small pieces of firewood to the bottom of the bonsai tree. I will pour sand into the bonsai tree. I will use sand of large size. Basically, I finished the layout of the bonsai tree. I will glue the big piece of firewood. I will glue the big piece of firewood to the bonsai tree. In the future, I will make a layout of the bonsai tree. Please look at the layout again and watch the video of the layout. After that, I will continue with the background. I have soaked this bonsai for 10 days. After 10 days, the bonsai has changed a lot. Today, the bonsai still has a lot of buds, but only a few. I can set up now. Next, I will pour the foundation into the pond. For this layout, I will use the foundation as a water soil. For a 80cm pond, I usually use 12 layers of foundation. However, this pond has a special layout. I can only pour the foundation in one corner of the pond. I don't plant many trees in this pond, so I will use 8 layers of foundation. Next, I will pour the foundation into the pond. I will use the foundation as a water soil. For this pond, I will use the foundation as a water soil. I don't plant many trees in this pond, so I will use the foundation as a water soil. After that, I will put the stones in the layout. I will put the stones on the foundation to make a cliff. This is an elephant stone. It has grooves on the stone. It looks like the skin of an elephant. I will put the stones in the layout. Next, I will put the small stones in the layout. After that, I will put the small stones in the layout. I will put the small stones in the layout. This is Belia moss. It is a beautiful moss. However, not many people use it. It looks like a cloud. The leaves of Belia moss are round. Next, I will put the small stones in the layout. I will use a glue. Before gluing, I will prepare a plastic bottle. I will spray the water on this bottle. I put the glue on a piece of paper like this, and then I put the glue on it. This glue is not hot, it does not damage the aquatic plants. Secondly, it does not produce toxic substances that affect the environment in the aquarium. And thirdly, this glue can be glued under water. It's pretty cool, guys. I'm going to split the glue into small pieces like this. I put it on the glue. So it will stick on its own. Very fast. After one month, I will spray water on the glue. Then I will finish this tree. So I finished gluing the glue on the tree. Now I'm going to spray water on the pond. I have a device like this to attach the water pipe to the pond. It's pretty convenient. Every time I need to spray water on the pond or change the water, I just attach it here. I don't have to stand still. When I wait for the water to fill up, if I don't need to use the light, I will turn it off. Because the light is a little hot. It makes the glue that has not been watered dry and damaged. I've pumped the water up here, guys. Now I'm going to continue to grow some aquatic plants in this ice box. Here I have this tree, which is a jasmine. I think this jasmine is very beautiful and easy to grow. I'm going to stick it in the ice box to make it grow and create green spots around the dry ice. Next, I have a real mini taiwan. I'm going to stick it on the small ice balls like this. I'm going to add more to the bottom of the tree. I'm going to use these ice balls to add more to the bottom of the tree. I'm going to create a green color at the bottom to make it less dry. Right now, I'm sticking the glue directly into the water. I put a piece of glue on the ice, then I put the glue on it and it sticks by itself. I've just finished the process of adding glue and aquatic plants to the lake. Next, I'm going to filter it. You can see that there are quite a lot of dust on the surface of the water. I'm going to filter it to clean the dust and the water. Here I have a product, a mini filter. The size is very small. The head of the filter can be rotated. The body of the filter is very small. Here we have a hole for the pump to pump out the water. In this position, there is a lever to adjust the power of the filter. In addition, I have an accessory like this, a plastic cover to attach to the mouth of the water pump. This is pretty cool. You can adjust the direction of the water flow of the mouth of the water pump. Next, another component of this filter is the head of the filter. When we put it on, the head of the filter can rotate on the surface of the water. I turned on the power. You can see that the head of the filter rotates. To make the head of the filter rotate like this, you have to pay attention to a few points. First, you have to put the body of the filter upright. Second, you have to adjust the power of the filter by the lever on the body of the filter. Third, you have to keep the water surface free from overflowing. For example, don't put the fan right in front of the head of the filter. Then it will not be able to rotate. Just pay attention to these three points. When you put it in the water, the head of the filter will rotate beautifully. I just ran for about 5 minutes, but the water surface is clean. Next, I will soak the filter for this tank. I will use Multibio filter. After setting up, I will soak the filter in water. There is very little water in the water tank. I will soak this filter in water. It will create a filter. These are seedlings that have already been raised. These seedlings will grow and develop. It will process organic matter in the tank. The food of fish or the food of fish will be processed by the filter. It makes the water not smelly. It makes the water clearer. You can use this filter according to the instructions on the label of the bottle. After soaking the filter, I will attach the thermometer to this tank. I have a mercury thermometer here. The thermometer helps us know the temperature of the water in the tank. Mercury only develops well at cool temperatures. Temperatures from 24 to 28 degrees Celsius are suitable for mercury to develop. If it is hotter, we will find a solution to cool it down. At the moment, the temperature of this tank is 27.5 degrees Celsius. This temperature is not 100% accurate. It will be about 1 degree Celsius. We know the relative temperature is OK. So I have finished the process of setting up this tank. I have filmed the process from the time we put the firewood in the tank. As well as putting the stone in the top of the tank. Then fill the tank with water and clean it. The process I shared is quite detailed. If you want to set up, watch this video carefully. You can do it. If you like this video, remember to like and subscribe to support me. If you have any questions, or if you want more detailed advice. If you want to contact me to order or buy accessories. You can contact me via Facebook or Yahoo. I will leave the information on this screen. Goodbye and see you in the next videos.