Hướng dẫn set hồ thủy sinh bonsai & núi đá từ A đến Á - Quoidecor

Hi, hello everyone, today I will set up a new swimming pool, a very splendid swimming pool. This pool is for guests, but I don't have enough money to play such a big pool. The size of this pool is 60x40x40cm, and the glass is super clear glass. The price of super clear glass is almost double the price of normal glass. This pool, I will make a completely new layout, different from the previous videos I made. Now I will go over the necessary accessories to make this pool. The first accessory is the pool, I use the green pool. This pool is very nutritious. Next is the Sobo bucket. I bought the SF1000F bucket. Next is the Swim Swim filter. For the swimming pool, I should attach a filter to clean the surface of the pool. The next important accessory is the CO2 tank. I use a 3kg CO2 tank. This is the CO2 pump. I use the Mufan adjustment valve. This valve is very famous in the world of swimming. Most people use this valve, about 600,000 to 700,000 VND. In addition, there must be a timer. Because I already bought an electric valve, I should buy another timer. The timer turns off and on the light and turns off and on the CO2 tank at the same time. The next accessory that provides light to the whole pool is the Chihiros A-Series LED light. This Chihiros LED light is highly rated. It can adjust many different brightness levels to suit the trees I grow in the pool. Next is the firewood. This pool has a bonsai tree. So I bought a firewood to make a bonsai tree. The firewood here is used to make a bonsai table. I will make a bonsai table with this firewood. This is a set of tiles, a bonsai tree, and a mountain made of tiger stone. Now I'm going to set up the pool. First, I made a plastic frame like this. On this frame, I drew a plan for the pool I was going to set up. Now I'm going to put the tiger stone and the firewood together to make a bonsai tree. After a while of cutting, I cut a corner like this. The curve is quite nice. So I finished the bonsai tree. It took me about 3 hours to make it. Now I've finished the bonsai tree and the mountain on the left. Now I'm going to make the mountain on the right. I will make an alley with a path leading deep into the mountain. Now I'm going to stick the stone on both sides to make a path. Finally, I have finished setting up the stone, the path, and the bonsai tree. Now I'm going to clean up and put it in the pool. Then I'll put the floor in. I'm going to remove these tiles. Now I'm going to put the tiles in the pool. I've already prepared the pool over there. After putting the tiles in the pool, I'm going to put the floor in. I have two types of floor. Red and Akadama. Red has a lot of nutrients, but it's black. Customers don't want to see the black floor around the pool. So I'm going to break the yellow-brown floor around the pool. Inside is the red floor to make nutrients for the tree. Now I'm going to make a partition like this. I'll put the Akadama floor outside. Next, I'll use the green floor inside to put it in. Now I'm going to remove this white tile. So I've finished spreading the floor for this pool. This is Akadama. Now I'm going to put Akadama in the pool to make a path. Now I'm going to pump some water in. Just a little bit. So it fits the floor. Then I'll start planting trees. Now I'm going to start planting trees in the pool. In this pool, I use these types of trees. First is the mini Taiwan tree. I'm going to put this tree on the tree. I have this type of tree here. This is a star tree. This is a hydrangea. This is the hydrangea that I'm going to plant in the pool. First, I'm going to put the mini Taiwan tree in the pool. After that, I'm going to put the mini Taiwan tree in the pool. I'm going to put these parts in. I'm going to leave the inside empty. I'm going to plant the hydrangea. Before planting the hydrangea, I have to choose the hydrangea I bought. I have to choose the hydrangea I bought. I have to cut off the excess hydrangea. Then I will plant the hydrangea. I bought this hydrangea. It has a hole like this. The hydrangea is planted in the soil. I will take it out. I will remove all the flowers. I will cut off a small tree like this. This hydrangea has three leaves. I will cut off the leaves. I will cut off the leaves near the roots. This will make it easier to plant. These leaves are rotten. I will plant these big trees in the back of the pool. I will plant these small trees in the front of the pool. People cut the roots of the hydrangea here. If you put it in here, it will break. I have to plant it like this. There are some red and pink leaves on these trees. It is good to have the color of the light on the hydrangea. Otherwise, the color will not be beautiful. This is a cutting board. A comfortable cutting board. I have prepared the tree to plant in the pond. Now I will plant the tree in the pond. I will use a nip to plant the tree. First, I will plant the big tree in the back. I have just finished the big tree in the back. Then I will water it. As I am planting here, I just water it to get rid of the water. If water is not enough, the tree will swell. I'm going to plant 2 of these here, and the other side will be the same, but I'm going to plant 7 green snails. Finally, I'm done with the plants. I still have the moss on the bonsai leaves. But now I'm going to water it for half a year, so that it can soak the plants. Then I will glue the moss, which takes a long time. This is glue. You can buy this glue at sanitary stores. I just glued the moss on the bonsai tree. Now I'm going to fill the pond with water. After that, I will install the filter, light, and CO2 to complete the pond. Done! Finally, I have finished setting up a swimming pool with a new layout. Today is 7 days after I set up this swimming pool. At the moment, the water is very clear. The plants are growing well. They are green and fresh. Because I have CO2, the plants grow very fast. Compared to the first day, the plants have grown 4-5 cm longer. The Taiwan mini-pool is also starting to have new moss. The pool is made of high-end super clear glass. So you can see it very clearly. It's a very good thing. Look at this mini-pool. I love it. Although it has only been set up for 7 days, it looks different from the previous 7 days. The small leaves are old leaves. The upper part is the new leaves. I put some Negrita snails to make it easier to eat. This mini-pool also has flowers. The yellow ones on the screen are flowers. This is a small star tree. Inside, the hydrangeas are also starting to grow. This pool is very clean now. I can release the fish. But this is a guest pool, so the guests will release the fish. Tomorrow is Sunday, the guests will come to get the fish. You can see the air bubbles on the mini-pool. It's breathing. If you grow geoduck and see it breathe like this, it will be successful. Geoduck will be good. I would like to introduce the structure of this mini-pool. The size of this pool is 40x60cm. The glass is super clear glass, 8 glasses, and a microscope. Sticker. The material used for this mini-pool includes reed sand, acadama, 2G stone, firewood, geomini Taiwan, and some hydrangeas, mini-fish, and salt-pepper. I use LED Chihiros CEA light. The reed is Sobo reed. The CO2 system uses a 3kg CO2 bottle, plus a fan and a pipe. The size of this mini-pool can be increased or decreased depending on the material and accessories you choose. If you want to own a mini-pool like this, or other sizes and models, you can contact me via Facebook. I will advise and design a mini-pool for you. If you find the video interesting, please like and subscribe to my channel to support me. Goodbye and see you again.