Transpiration Transport in Plants

Science and life
122 followers
Hi everybody and welcome back to Miss Angla's biology class. I am Miss Angla and in today's
video we are going to be taking a look at transpiration, which is the water loss that
we see through the stomata in plants. Now if you don't know enough about plant tissues,
you're going to want to click the link above now to watch my video on plant tissues because
it's going to facilitate your learning and make it much easier to understand this topic.
Now as I mentioned now, transpiration is the plant's way of essentially losing water through
their stomata, which we can see here in the diagram as these small openings that we find
on the underside of the leaf. Some plants have stomata on the stems as well, but for
our explanations we're going to focus on the stomata being on the leaf and how water moves
from the roots up the stem and then through and out of the leaves. I'm also going to walk you
through how you should explain that and what kind of questions and investigations you might have to
do in class and in exams. Now in order to have a really good understanding of transpiration,
you need to be very well versed in water moving through plants and you need to be able to
understand the structures that facilitate this. Now on the left hand side what we see is the root
that water takes and that means you actually need quite a bit of knowledge about how water moves
into the roots, up a stem and then eventually out of the leaves via the stomata. Which brings me to
the second picture that we see here. It is a diagram of stomata, which are the pore-like
openings on the underside of leaves, which is where transpiration occurs. Now in exams and tests
you may be asked to draw or label a stomata and I just want to run through some of the key things
about its structure. First things first, the most identifiable thing about stomata is their guard
cells, which are these sort of like jelly bean shaped cells that we see over here. And what you
will notice in the two pictures is that one of them is open and one of them is closed. Now the
opening that it creates is called the stoma, please don't confuse it with the stroma, that's
s-t-r-o-m-a, that's the filling of a chloroplast. So let's not confuse those two things. The stoma
is the opening and essentially that is affected by the vacuole and whether the vacuole is inflated
or deflated will open and close these guard cells. Now the guard cells are also really unique
because they have chloroplasts in them and they have chloroplasts in them because it needs to
provide the stomata with energy in order to open and close. The next important thing that you will
also notice is that they are surrounded by these other epidermal cells and these epidermal cells
are thin and they have no chloroplasts in them because they don't need to. Now that we have a
good understanding of the route that water is taking and the structure they are moving through,
now let's actually look at what actually is happening and how to actually explain transpiration.
So let's get into the route that water is taking when it is going through transpiration in the leaf
in particular. Now at this point you should be pretty well versed in plant tissues and cells
because if you don't know the structure and their function it's going to be really difficult to
explain this. Now in this picture here we have a cross-section through a leaf and at this point
I also expect you to know what all of these structures do. We have the cuticle which is a
waxy layer that prevents water loss, the epidermis which is a protective outer thin one cell layer
thick, we have the palisade mesophyll which is where the majority of photosynthesis takes place,
we have the vein which is made up of xylem and phloem, very important for what we're going to
talk about now, we have the lower dermis which is just the mirror image of the upper dermis also
for protection, we have the spongy mesophyll which is very important for transpiration,
it's the packaging tissue in the leaf, it also has lots of intercellular air spaces
and lastly we have the stomata which is of course the gateway for water and gases to leave
the plant. Now with being said of all of these structures I'm going to walk you through how
water actually diffuses out of the xylem through the plant and then out through the stomata.
So let me give you just the basics and then I'm going to break it down into how you should
actually be explaining this. So in the vein of a leaf water is going to move from the xylem and
it's going to move into the spongy mesophyll, from the spongy mesophyll it is going to move
into these intercellular air spaces that we see here, from there it is going to then move out of
the stomata into the atmosphere, so that is the route it takes. But now what I want to do is
explain to you how it actually does this. So first things first we need to start off at
the source of water that is entering the leaf which is in the xylem, so let us draw two little
xylem vessels next to each other and then sitting up against the xylem vessels I'm going to draw
some spongy mesophyll cells and I'm going to leave a big area or an intercellular air space that you
can see here. Now what's important to understand is that water is consistently moving through the
plant via transpiration and transpiration pool but the mechanism that is driving that is
concentration gradients and so what's happening is you are always moving from a high concentration
of water inside the xylem to a low concentration inside the spongy mesophyll and that is moving
through a process which we know as diffusion, right? But more specifically it's not just
diffusion, it's osmosis because osmosis is the movement of water specifically. Diffusion can be
anything else, it can also be gases, it can be nutrients, so make sure you use the word osmosis
when you talk about water moving from a high to a low. Now as the water leaves the xylem and makes
its way into the spongy mesophyll cells it starts to turn that area inside of our spongy mesophyll
also into a higher area, higher in relevancy. In other words in relation to what it was before
it's now become a little bit higher. Now as that happens water starts to accumulate on the surface
of these cells. Now that means that the outside of the cell is becoming a higher concentration
but these intercellular air spaces, these little pockets, are lower. Now this is where it gets
interesting. The water cannot just move through air. The only way that water can just move through
air is if it evaporates and that is why we need the little air pockets because water will only
evaporate if it is exposed to air and of course temperature. So what happens is the water on the
surface of these cells starts to evaporate into these intercellular air spaces. It becomes water
vapour and now what you end up having is water vapour collecting inside of these empty spaces
and now that in turn creates a higher pressure on the inside. So now we're not at a higher pressure,
we're at a higher concentration and now that high concentration of water is going to need to leave
because if I were to draw at the bottom here an opening which would represent our stomata,
now what you have is a higher concentration of water vapour inside these spaces and a lower
concentration outside of the stomata, outside of the plant in the atmosphere. So now what you have
is water evaporating and then moving out into the atmosphere where it moves to the lower
concentration gradient and that's essentially how transpiration works. It is a process of diffusion
via osmosis as well as a process of evaporation which is when of course water is evaporating,
turning from a liquid into a gas, moving from a high concentration to a low concentration.
Now when it comes to measuring transpiration, we also need to know how this works and what
device we use. Now the most classic device that you may see in your textbook or you've seen
explained before is called a potometer. Now a potometer is a very basic setup and essentially
there are some precautions that you need to take just to make sure that you set it up correctly.
The first thing is this little leafy twig that we're going to use to test for transpiration
needs to be fresh. It also, when you cut it and you want to place it into the potometer,
you need to make sure that number one, you cut it under water. That's because you don't want
any air getting into the stem, you just want a continuous stream of water and the other thing
that you want to do is if this represents the stem of our leafy twig, we want to make sure we
cut it at an angle. This increases the surface area and it makes this experiment work a whole
lot better. Another little precaution that we always take is wherever this rubber stopper is
and anywhere else like where the tap is, you want to put some Vaseline because Vaseline is water
and airtight and so basically it makes sure that nothing leaks in and affects the validity of your
experiment. Now how does a potometer work? I need you to imagine that this entire setup is filled
with water as you can see and there is no air in here other than this little air bubble over here.
Now that air bubble is an indicator of whether there's been any movement of water. Now if
transpiration is happening correctly and this is working properly, essentially what should happen
is the water that is in the beaker should move up through the tube, past the markers
and then into the leafy twig, through its stem and then out through its leaves. That's how it
should work. Now if that is working and that is the case, then this little air bubble that we see
over here should be moving over like that to the left and often what you see in exams or tests is
they also include like a ruler and there'll be like measurements or increments that are on it
and it will tell you something like it moved this many millimeters over this many hours
and that can give you a rate at which transpiration is occurring because it's giving you a speed,
distance and time so you can calculate the speed if you have distance and you have time and you
can calculate the rate of transpiration that's happening in a leafy twig. Now the final thing
that we need to look at is the factors that affect the rate of transpiration, so effectively
how quickly transpiration is occurring and we're going to start off by looking at wind. Now wind
is a really interesting one because as wind increases the rate of transpiration increases
and this is how it works. If this represents a stomata opening, the regular movement of water
is always going to be a higher concentration on the inside of the leaf moving outwards to a lower
concentration on the outside. Now generally what will happen is water vapor will accumulate
just outside the stomata and slowly but surely that can then turn this into a high concentration
just outside and that would slow it down. However if wind comes along it blows away all of these
water vapor molecules that have accumulated on the outside and it maintains a low pressure,
sometimes even makes it even lower than what it was before and so because of this blowing the
water vapor away all the time it leads to a very steep concentration gradient. Now we move on to
humidity. Now what's interesting about humidity is it is the opposite of what happens in wind and
this is the reason why. Again if we have our stomata opening the regular movement is from a high
to a low but as we know humidity means that there is going to be a high concentration of water
in the air on the outside of the leaf. Now that means if there is a lot of water vapor on the
inside of the leaf and a lot of water vapor on the outside of the leaf it's going to reduce the
concentration gradient and it's going to slow it down. And so humidity if you don't know is how
much water is in the air and that ultimately is what decreases transpiration as humidity
increases. The next factor affecting transpiration is temperature. Now temperature is a little bit
of an easier one to understand because you've got to think of it again like a concentration gradient.
We have our stomata and we have our high concentration of water on the inside of the
leaf and a low concentration on the outside. Now as water makes its way out of the stomatal opening
when it is really really hot all of the water vapor that is collecting on the outside of the
leaf starts to evaporate. Now if it evaporates that means you maintain the concentration gradient.
You maintain a high to a low and so as temperature increases the rate of transpiration also
increases. Now the final one light intensity is a little bit abstract but if you understand the
fact that light is needed for photosynthesis as light intensity increases transpiration will
increase and there's two reasons why. Number one it does have to do with the temperature as we spoke
about earlier and we saw in this diagram over here in the yellow. If there is a lot of light
there is generally a higher temperature so more water evaporates but also if there is more light
there is going to be more photosynthesis and photosynthesis needs water so that means more
water is going to be pulled up to the leaves so that they can photosynthesize and that water is
ultimately lost through transpiration. Now as always I like to finish off my lessons with a
you can use all of these words on flashcards, mind map out your ideas, it makes studying so much
easier. First of all we spoke about the xylem tissue and its importance in transporting water
and how it gets from the roots to the stem and into the leaves. We also spoke about diffusion
which is really really important to understand in order to explain transpiration and how substances
move from a high to a low concentration. Specifically we need to know about osmosis
which is the movement of water and there comes in that concentration gradient where we move from a
high to a low and that is the way in which water goes from the xylem to the spongy mesophyll and
then into the intercellular air spaces and out through the stomata. The spongy mesophyll is the
filling of the cell which is where the majority of this action and transpiration takes place
and that water that moves into the spongy mesophyll is then evaporated into the
intercellular air spaces. It then exits through the stomata which are the openings or the pores
in the undersides of leaves and to measure all of this we use a potometer. Now if you like this
video don't forget to give it a thumbs up and make sure you are subscribed and I will see you all
again soon. Bye!
