✂️ Welcome to the Official Tomb45 YouTube Channel 👑 Don’t forget to turn on notifications 🔔 and give this video a thumbs up 👍 if you enjoyed it. Thanks for watching!
👇 Get connected and take the next step:
📚 Free Barber Community & Education Join the Tomb45 Barber Skool for free tutorials, livestreams, and tips: 👉 https://www.skool.com/tomb45
💼 Serious About Becoming a Six-Figure Barber? Apply to the Six Figure Barber Mentorship Program: 👉 https://skool.com/6fb
🧾 Need Help with Taxes, Bookkeeping, or Scaling Your Business? Visit Pie Accounting, our firm dedicated to barbers and small business owners: 👉 https://www.pieaccounting.com
🛒 Shop Official Tomb45 Tools & Products Trusted by thousands of elite barbers around the world: 👉 https://www.tomb45.com
📱 Follow us on all platforms @Tomb45 Let’s keep pushing the culture forward. 💪
Guys, in today's video, we're going to be breaking down a super simple,
super easy to follow system
that you guys are going to be able to use to take this overgrown hair
and turn it into a nice shape,
a really tight taper, and a textured fringe.
And I think you guys are going to love the fading
system that we use for the taper
because that can be used on all hair textures and all hair types,
from fades, high fades, low fades, tapers.
So we're going to get right into it. Let me know
in the comment section down below if you have any questions.
All right, guys, so the first thing that
Something that we like to do is make sure
that the hair is fully saturated, right?
you're going to want to make sure that the hair is wet
so that way you can have control over it
while you're combing it out essentially what we're going
to do right now is we're going to comb this
separating the sides from the top
and we're going to base that off of the growth pattern
you can see his crown right here
so let's split the hair accordingly from here to each recession
point so i find it a little bit easier actually
to start pretty much the comb right here
on the on the crown and kind of use my thumb
to follow the hair as we comb it and then that
makes it a little bit easier to kind of get
these clean splits right to be able to separate
the top from the sides then we'll go ahead
and do the same thing right here just kind of use
your finger to follow and you want to follow through all
the way down to that recession point
that's definitely going to be the easiest way you know
to get a clean separation from the crown to
these corners here separate the top from the bottom
the same thing here just use your finger
Follow the comb as you go all the way through.
So hopefully y'all can see how much easier it is
to get that split, right?
When you're using your finger, right?
Following the comb all the way through.
So what I'm gonna do first is we're gonna do some layering
because we need to build this shape, right?
The goal is gonna be to have a clean taper, clean taper,
build it up into a good shape to have the textured fringe.
Let's go ahead and just jump right into the layering, guys.
I know that...
I'm going to want it tight towards the bottom
so that we can have a nice clean taper.
But I also want to have enough volume up here at the top
so that way he doesn't have any
hair sprouting out because it's too short.
We want to have a nice full crown.
So if I start to pick up the hair here in the nape area,
let's go ahead and start to
create some shape.
So again, this is kind of like a triangular shape.
We're going to want to keep it tight
at the bottom and float our way up.
Hello.
And then we're just going to take this all the way around, guys.
I'm going to want to remember at all
times, you're going to want to have it
tight at the bottom and then floating your way up and off the head.
Similar, you know, in a way to how you would be like creating the shape
with with the clipper, right, where you're
floating your way up and off the head.
But just continue to do this.
You can have a little more control using the scissors.
Keeping the fingers tight at the bottom and angling it up off the head.
Then if you need to adjust your grip you definitely can
because sometimes it
can be a little uncomfortable you know working your way all the way
around the head with the scissors
but you know whether you need to take the
comb from the top or from the bottom you know
do what you got to do establish
that shape.
I started here in the back with this section,
and then I'm able to follow that traveling guideline
all the way throughout, even up here into the taper area.
As you see, even here in the taper area,
I'm still following the same concept.
You know, I'm up tight at the very bottom,
but pulling out as we get higher, trimming that down.
And again, right here, you see,
it's like elevated up at the top and tight at the bottom,
and we're just gonna keep on trimming down.
So that...
is a great way to go ahead and start
and establish the shape early and if you guys want to do a
little bit of cleanup work when you're right here
in this area you can go ahead and take your comb
and then just do a little bit of scissor over comb just
to kind of soften up these different layers
that you've that you've done it's almost like cross-checking
in a way because you know we did
basically vertical sections all the way throughout here
so if you want to polish it up a little bit
you can go in the opposite way and you can go ahead
and do some some horizontal cross-checking
So we're going to do the same concept again guys.
Remember that point that we started with right?
I'm going to follow that point again still using
my thumb to follow the comb through
so that way I can go ahead
and create a nice clean split down the middle and we can pick up
on that line here and just find the point
in the front where the hair naturally wants to split.
As well, so go ahead and clean up that separation right there.
You have the top split in the two sides
and according to the growth pattern.
So the easiest way that I like to do this,
you're going to notice that the comb creates
these lines coming down, right?
That's actually going to make it easier for you to pick up
sections of hair and have that control.
So let's go ahead and pick up the first section of hair.
And this is where we're going to go ahead
and determine how long we're going to want this hair to be.
So I know we can go ahead and remove a good solid inch and a half off
the top and still have the volume that we need for the style.
So I'll take that clean right across the middle.
And then I'm going to continue following
that traveling guideline going back.
And I know that I have a traveling guideline
because you could see through.
That's why you don't want to pick up too much hair at once.
I could see underneath that the hair that I just cut.
I'm going to go ahead and match that again.
And now we're going to continue and continue working this back here.
And I'm going to keep on following that traveling guideline,
just picking up a few rows of hair at a time.
So guys now that we went ahead
and did that traveling guideline let's go ahead and re-split
the hair. We're going to bring it back
to that center point where we started at and you know
this is really how simple hair cutting can be.
It doesn't have to be a super over complicated
process. You saw how simple it was to remove that main bulk.
Now I'm going to show you how
simple it can be to blend in that middle length
to the side length that we already established.
And I'm going to pick up a few more rows of hair
but instead of elevating directly up
I'm going to pull these outwards
and you could see a short point here that is the length
on the side we established and a short point here,
which is the top length we established.
And if you just make one cut like that,
that's how simple it can be to be able to connect the
sides to the top. So, you know,
it's really just a matter of creating a shape on the side,
creating a shape on the top, and then connecting the two, you know?
So it really doesn't have to be
very overcomplicated. You see the shape you made on top,
you see the shape you made on the side,
clip off the excess. And again, using that traveling guideline,
we'll take it all the way back.
Since this is going to be a textured fringe cut,
we're going to want to make sure that this hair
doesn't extend too far past the brow.
So pretty much the way that I like to go about this is I'm
going to pull this hair forward
and we're not going for a clean edge up cut, like a clean
chop in the front. No, we're going
for a more textured look. So I'm going to go in
and create a very textured, very choppy finish in the front.
And we can even further soften this down the road with a razor blade.
But for right now y'all can see
It's really just kind of creating a nice chunky finish here.
Guys, so this is the 245 Sea Salt Spray.
And this is what we're going to be using.
We're going to saturate his hair with this.
And this is going to give the hair that kind of that beach look, right?
Like you've been swimming all day in the ocean.
And, you know, the hair kind of has
that salty feel where it's like nice and textured
and really give it a nice fluff.
But you're going to want to make sure
you put enough sea salt spray in here
to be able to give it that effect.
I really worked that into the roots.
So this is the setup that came out at the same time
as the clipper and as the trimmer.
You can see it's in the same color scheme,
but we're using the BaByliss diffuser attachment.
Have it on medium heat, but high speed,
because I found that when it's on the highest heat,
like these fingers can actually get really, really hot
and irritate the client's skin.
So that's why I like to have it on medium heat.
And the best technique that I like to do, guys,
is press it down and just do this twisting motion.
If you could just do this twisting motion over and over again,
all the way throughout the head,
that's what's going to really help these curls kind of pop out.
And I try not to let the diffuser
cap really move around too much.
I just want to twist and rotate it in that section.
So you guys can already really see the fluff
is starting to be built in there man like
the body is there the shape is there
and now you can really start to see like kind of that built up
shape that we were creating this whole time.
All right guys so for the universal fading system guys
like I said today we're going to be doing it on this taper area
but the principles for this fading
you can use it here in the taper you can use it
in a low fade you can use it in a high fade.
On any hair texture, guys, I always
recommend starting with the clipper closed.
And the reason you want to start with the clipper closed is because,
you know, if you go in with the trimmer to put in that initial line,
it's going to be a very harsh line to be able to fade out later.
You definitely can get
a very precise fading guideline with your trimmer.
But honestly, you're just making the job way too difficult.
And it's so much more efficient if you just go
in with the clipper all the way closed.
So let's go ahead and do the same thing back here.
And on the other side, Clipper Close is going to be the most reliable,
easy to fade out guideline anytime you're fading down to skin.
So that's your primary guideline.
Now we need to go in and add a secondary guideline.
A lot of YouTubers are going to tell you for your secondary guideline,
you need to go in with the clipper all the way open. I would argue
that going in with the half guard closed actually is a softer guideline,
an easier guideline to work with.
And you're going to see what I mean as we
work through this process but we're going to be fading down after this
and plastic fades easier into plastic than metal does.
Again it's the same concept as you know using the trimmer
and and no guard all the way open
but it's it's a much softer easier line to fade out.
So again here half line all the way closed.
Now I would definitely recommend that you guys for efficiency sake
use the one and a half guard with the lever open.
And start with pressure at the bottom
and float your way up and off the head.
With the one and a half guard when it's open,
it's actually going to leave the hair dark enough to
where you still can play with the gradients,
but it's going to help you kind of layer and
start to create, you know, even more defined shape for your taper.
Going with this one and a half pressure at the bottom
and float your way up and off the head,
still with the lever open and you're going
to see it does leave it dark enough.
It's where you still have a clean,
clean taper canvas to play with as far as gradiency goes.
But let's take this all the way around the head here, guys.
So just look at that shape right there, guys.
It complements perfectly the layering that we started
with and the shape that we're creating with the clipper.
So let's go ahead and knock out this last part right here.
One and a half guard open, pressure at the bottom, float your way up.
Now we can go ahead and close that one and a half guard.
And we're going to work just a little bit lower than what we just were.
When the one and a half open, that leaves it pretty dark to where,
you know, you can seamlessly blend up into bulk.
But once you start to close this lever, now you're starting to play
with the gradiency and you're starting to lighten up this little
guideline right here that we created with that half guard close.
OK, so one and a half close here.
We're going to go ahead and keep on working out this little line,
this little guideline right here.
It's the same concept, guys.
You know, you're just working incrementally lower than you just were.
And here we go again one and a half closed.
Now if we're going to be fading down you know you could
you would think that the one
and a half guard the next lowest guard is going to be the one
but I'm going to suggest that the half guard actually
is going to be the best option here.
Remember we set the secondary guideline
in with the half guard closed. What better guard to
take out that line than with the half guard itself.
If I take the half with the lever open
I can do the same thing. I could float my way up.
Notice I'm going to keep on doing the same motions,
guys. The same thing that I was doing with the one
and a half guard open, same thing I was doing
with the one and a half guard close.
So I'm just working through here. Now notice I'm going to
start closing the lever as I work my way down.
If you're thinking about it, really the only
thing that you're missing is the one guard
with the lever right about halfway closed.
And I think as you can see here,
we're really finessing that just with hand motion.
Right pressure at the bottom and floating your way up.
So guys we're coming to the end now right
like all we have to do now is worry about
this primary guideline that we put in. What better to
take out the clipper close line than the clipper close itself.
So we're going to return to the
clipper close and we're going to break through this line
and now since we're going to go a little
higher we'll go a little longer.
Click this first lever and this is kind of like our bumper.
You know, like our bumper guards when we're bowling, right, for safety.
I know I need to go a little higher,
so I'm going to go a little longer.
And we can push that line confidently higher.
Now I'm going to go the next click up
a little longer, go a little higher.
Now we go a little longer, the final click lever.
And now we can just use the corner of the blade to float
our way up into this half guard area right here, guys.
So guys, we're going to be using
the Babyliss Pro 45 collaboration, this trimmer.
But what's special about this one
that we're trying out today is this is the one that has
been sharpened and modified by Beam.
He's got his company called the Blade Lab. So we highly,
highly recommend that. And I'm going
to be showing you guys how this performs on this haircut.
And you know, when I'm lining up here,
I also like to make sure that this C cup kind of flows
into the style a little bit too, right?
But...
Now here's the cool thing that I really
appreciated about Blade Lab and how he was
able to set this blade is I was able to request him
to not zero gap it all the way. I still like
to have like a tiny little micro gap on how
my trimmers are because I know naturally
I can be a little bit heavy handed when I'm lining up.
So I'm able to still get a super precise, super crispy line
that also is fully capable of balding out without snagging
or pulling any hair.
You know, the customization feature for me is like top,
top tier when it comes to Blade Lab.
So thank you so much, Beam, for setting this up.
Y'all can see how crispy that line is on the first shot.
And then we can go ahead, catch up here right over the ear.
you can see it's catching all those hairs with no problem
and that thing is crispy man i love that
and then like
i said guys
these blades
are set so well
that like i'm
also able
as i mentioned before to bald out the back here
at the back of the nape with no irritation so
now it's definitely definitely a worthy worthy investment
and he doesn't even really overcharge
The blade itself, I'm pretty sure I paid like 60 bucks for this blade.
So I would highly, highly recommend it for you guys, man.
You know, the lineups just came out super crispy.
It was able to bald out exactly what I needed.
All right, man, let's go ahead and show you this cut.
This is what the taper in the side and the back is looking like.
What do you think about that?
Very nice.
You like that?
Awesome, bro.
Love it.
All right, cool.
You love it.
I love it.
Guys, let us know what you thought about today's tutorial
and if the fading system that we used in today's taper is going
to help you be more efficient and just take that stress away.
Let us know if it gave you a good plan.
We're also super interested to know what do you think about what
the sea salt spray did for his hair texture.
I feel like it really helped these waves pop, the curls come out.
So let us know what you think about
that and we'll see you guys in the next video.