The Overlander Overhaul: Electronics Edition - Built 4 Adventure - Mountain State Overland

The Explorers
19 followers
18 Video ViewsยทOct 23, 2022
Okay we are at GP Factor in Ephrata, Pennsylvania
and we're going to go check out and see what they're working on.
I've heard they've got a new board for the canopy camper with Red Arc and we're
going to install this thing this weekend at OK 4 Wheel Drive but I wanted to stop
here first. AJ what's up man how are you? Hey Jason
how are you doing? Good good good what are you working on?
So we're just finishing up the Manager 30 kit. It's the first batch actually so
we got a lot more to do still and we got yours done so we got that here
today and we'll go through that board and show everybody what's it about.
Sweet. All right here it is. Boy this is exciting.
Yeah what do we got here? So what we got here is your new Red Arc Red Vision
Manager 30 kit that's going to go into your canopy
camper into the top cabinet where your existing
electrical work already is right now. And for a wiring system
what makes it nice for us as a company building these in a kit that's
production is you have one ecosystem in Red Arc then
working with the ecosystem of the truck. This is your
main unit with all the wiring all your harnesses and
the full Manager 30 in the TVMS box and over here you've got your face
plate obviously with your Red Vision display
which also controls all the entire system itself.
And this would obviously be on top of this when it's mounted fully we have it
out so you can see everything right now. It's
going to manage your solar power coming in it's going to manage your
auxiliary batteries your house batteries in the back of the camper.
It's going to give you all your fuse hookups for all your accessories no
matter from USBs to fridges to extra connectors for water pumps you
name it. It just does everything in one system
so once you get your your camper your four camper accessories and the solar
hooked up you mount this board up and then
everything else is done from the bottom. Yeah
so you guys have been kind of working on the design for this too because trying
to fit all of that wiring up behind the existing panels that you've
you've kind of supplied in the past was a little bit of work but now this
is open on the bottom so right you know you can go straight up into a loom
really nice really easy easy to maintain easy to add on to right
correct Red Arc does a really good job with our electronics so we want to make
a kit that was worthy of the the quality of electronics
we're using to give people a really good turnkey
solution for their campers. This will come fully assembled
together but since we wanted to show the inside of the the full
boxes that control everything in this video
we wanted you to see that so we're going to actually show you how we mount this
in here as well. Okay that's it we're all done the board's
all assembled and all we have to do is get in the truck and
we're good to go. All right we've got the unit in the box
we're going to load it in the truck we're going to take it to OK4WD
we're going to get this thing installed and we'll check in with you later.
Yeah we're in the shop here at OK4WD we were just at GP Factor
yesterday planning to get some tires and some new wheels mounted up and a
couple other small pieces from GP Factor as well but
we'll give you guys kind of a rundown on what that stuff is a little bit later.
We're going to get all the this cabinet out and then we're going to take the old
power board out too so drawers first. So we've already got this power board
installed and we've got a lot of wires coming down here we're gonna have
to be making some changes but the plan here
is to actually mount a battery in behind these fridges lithium-ion battery and
then we're going to run power up to a new panel here.
We're going to take this off and see what we find behind here.
I don't know who built this board but probably didn't know what they were
doing. No I'm the one that built it.
No yeah you did if you go back and actually watch the yeah yeah we did a
good job I mean we did we thought about how we were going to lay this out
because the charge controller is actually back here.
It's a lot different than the new ones obviously but at the time this was a
this is a really good option for the campers. In order to kind of remember
what we're doing and speed things up a little bit we're
going to label these so we know where and what goes to what
when we put the new board on. With the older style campers for those
of you that have an older camper it's maybe two years plus old
they didn't have a common ground for all the accessories whereas the new ones
have a common ground so we'll ground all the grounds for those together
and then the accessories will have their own spots on the RedVision board.
These connectors are already on the bottom coming out the bottom of the
board so we don't have to just plug them in it's done.
So we're gonna do the water pump now we're gonna do these the fan for the
fireplace and then we'll do your two fans up here
these nice Seraco fans you got here and we'll do the camper accessories
then. So we'll get all these connectors on so it's
plug and play. So the crimp tool that's your little connector right there
and that goes in this this tool right here fancy tool
and you crimp down so it is the same way every time.
You can get this on Amazon, Amazon's the best place to get it.
Okay there's uh there's the name brand one that's like 100 bucks
there's this one that's like 50 and then there's the
Amazon version that's like 25 and the Amazon version works the same as this
one so I'd get the Amazon version. Have your plan before you start cutting
wire and before you start ripping stuff out like know a basic plan
so you know where your wires are going to run you know what you have to hook up
you know how many accessories you have to hook up to the
RedVision board it just makes it a lot easier so you can manage your
connections you know what wires have to be run so that when you get done with
hooking everything up you don't have it all mounted and then you're like oh
wait something doesn't work like my truck battery's not hooked up
my solar's not grounded so those things all make sure you just have a good plan
in place. A bunch of little projects a little fun
stuff but it's a GP factory install type of day so what we're going to do is
we're going to put these little fun steps
on the side of the canopy camper that'll actually fold down and allow us to
climb up on top of the truck to load boats check on maybe some wiring
pull some branches out from underneath the load bars whatever needs to be done
but we're going to zip these guys on real quick and move on to the next step.
There's actually a magnet here if you can see it on the camera
on either side which kind of helps this thing kind of snap together and kind of
stay shut so it doesn't bounce around and come off.
Just these stainless allen bolts here and there's little threaded pucks behind
there I've got them in and allows you to position where this where you want it.
I'm going to go ahead and keep this thing kind of low so it's easy to climb
to from you know down here at the tire so yeah we'll just tighten these down and
hit the other side and we'll be done.
All right let's talk battery this is a Renogy lithium iron phosphate 50 amp hour
battery it measures about six inches tall six inches deep and about seven to
six and a half inches wide so it's going to be a perfect fit behind the two
Engel fridges we have mounted in the canopy camper and underneath the
water tank.
Here are the Engel stainless strap hold downs for fridges that we previously
had installed in the canopy camper floor.
I'm going to reuse these and use like a cam strap like an NRS strap or something
like that and essentially either go over top the battery this way or this way to
kind of keep it down.
This thing is super light right and super awesome excited about getting it
mounted in.
We had previously talked about using a deep cycle systems battery and installing
that in the truck which is pretty awesome it's about two inches thick by
about 27 inches wide something like that but the Andersen connections are built
into it it's plug and play it's ready to go super easy to use it just couldn't
come to market in time for us to get this build complete and we're hitting the
road so yeah reach out to Carl at deep cycle systems if you're interested in
their products I'm pretty excited to see him hit the floor.
All right it's break time we're gonna hit the road in the tundra and uh go
tool around a little bit.
It is like 96 98 degrees and like it feels like 90 maybe 100 humidity it is
just hot we're gonna have to find a pool tonight for sure.
Yeah we're getting a lot done today it's uh we're taking our time which is
obviously nice and um I think all we have to do when we get back is get like
the shunt and some of the other stuff hooked up but uh it should be should be
fairly easy uh for the rest of the install pretty straightforward it helps
that a lot of the stuff was already run to the camper for your other setup that
you had before.
You've got a shovel too that you're working on?
We did two different um recovery shovels um honestly it came down to we you know
we didn't like what was on the market uh just personally and we wanted
something simple but effective but uh no it's cool we really like it a lot it's
100% made in the U.S. we make it right here.
Let's take a look at it when we get back.
Yeah absolutely.
This is the first shovel we did this was the the solid piece one here so solid one
piece uh welded aluminum shovel and it's got a t-handle slot so it's pretty
durable very simple and we bevel the edge we try to keep it like a traditional
spade shovel so it's a little bit easier to dig with but you know simple tool
that's you know no super frills but it'll work really well for a good recovery shovel
and then we have another version of it that is a little more fancier version that version
will come with the handles actually threaded it's got a 3-inch thread on it and then we're
making little brass ends for it so what's cool about this one is you can take this
pin out here and take the shovel apart and you've got yourself a 26 ounce hammer to
camp so and it stores nicely too because you can uh throw it in a easy storage bag
or something if you want to in your camper the way we designed the coupler is that it's
designed so it doesn't rotate um so it is going to wear because obviously metal and
metal wears you know as you're using it and whatnot so this way it kind of reduces the
wear down that's why it's raw too so we get a little bit better fit because the powder
coat obviously would would make it pretty hard to put together and take apart so it'll
go in right there you'll throw the this wire lock pin in and that's it so these will be
out pretty soon here i think both will be out this month and you'll definitely be able
to get them at at you know on okie for all jars website uh probably before the end of
august for sure so that is it so from here we've got you've got your truck and you've
got your house battery your auxiliary battery we've got our positive running to the truck
which is correct here and then we've got a this is a ground that we're running back to
the shunt the battery monitor the shunt the ground the solar so what we're running is
we're running all that stuff back then which is going to run directly to the truck or it's
going to run to the to the battery monitor here which then runs to the house battery
which is right back here which will be behind your fridges now we are going to put the mounting
brackets in measure them to make sure they're the correct height and once they're in we'll
tighten them down then we'll throw the plug the board into the camper mount the board up and from
there we're almost done so hey guys i'm sam with okay four-wheel drive this is the gp factor red
vision board so it's a full red arc tvms system so it's a total vehicle management system so i'm
going to hop in the truck and kind of show you what it can do basically the red vision can control
everything inside of the camper we have a shore power plug on the back so you can plug your camper
in if it's going to be sitting for a while this also incorporates a solar controller inside the
manager 30 so the solar panels that you put up on your truck can charge through the battery so if
you look at the panel we have all of our camper controls here so these are the inside lights you
can see the lights are on right now so it's all digitally switched inside of the red vision we've
got various fans the chargers that are up in the bed area we have a water pump in here and the cool
thing is is you can control all this stuff from your phone also so you can see if i go to this
front page if i hit my the camper lights they also turn off on the red vision so that's a really nice
feature if you're up in your bed and you want to turn your lights off and you don't feel like
reaching down and you have your phone up there with you you can tap the lights it's a 30 amp
charger so this truck has a 50 amp hour battery so it charges it relatively quickly it runs a pretty
big fridge so the fridge is also connected to this with something like a fridge you can lock
the control on all the time so the fridge will never turn off unless i kill the power to the
whole unit same thing with the chargers on the side of the of the panel i keep those locked on
all the time all this is very configurable you can do it all inside the app all the switches
are controlled and programmed inside the app right now in jason's truck the charge is showing zero
just because the red vision and the manager 30 do kind of have to learn the battery's capacity
there's a shunt hidden inside the goose here that reads the power input and the actual power output
so it does need to learn the system a little bit when you do plug this in initially
it will say zero percent don't worry as there there's some charge cycles and some discharge
cycles it'll learn the capacity of the battery and it'll tell you how much time you have left
so right now my fridge is kicked on and it says it can run my fridge for basically 11 hours
and then once the fridge turns off it'll go back up and if you turn lights on
and other loads that time will calculate and basically go down so it gives you a good idea
of how much power you have left i have a relatively small battery in here for the
kind of load that i have so if you did upgrade your battery all you have to do is tell the
red vision what the new capacity is cool thanks buddy yeah no problem we're at okay four wheel
drive we're gonna get some wheels and tires mounted on the tacoma before we head out west
for colorado and oklahoma we're gonna be spending some time out there filming after and before
overland expo but right now we're gonna be mounting up some toyo mts on some nomad wheels
you guys have seen these things and we've got a set of them that we're gonna be installing on
tacoma let's get to it all right truck is done and we're heading back to west virginia we're
gonna put some miles on check the lug nuts before we get going and i got a little friend here how
and then we'll see you in colorado or maybe oklahoma talk to you soon
