The New 40' Build is here! Cut outs and Welding

Earn, Invest, Reap
57 followers
1 Video View·Nov 8, 2022
The New 40' Build is here! Cut outs and Welding
This one's gonna be pretty cool. We're going ultra modern right there, as opposed to a previous.
You'll get to see them side by side. So that's cool. So we just got this 40 foot high cube.
It's used, but as you can see, it's in pretty good condition for use. Well, not right there,
but all the rest of it looks pretty good. So we're about to start cutting this thing apart.
And first we're going to use this super awesome leveling system we have right there.
So this cool leveling system locks into these front pins and that or the rear. And we can
actually manually adjust each side and we'll get it all set right where we want it. Put some blocks
in or some wood chunks and or both and then go back there, do it again. And this time we're
going to make sure we support it in a couple of extra places because we're going to be cutting
out side panels from floor to ceiling. We don't want it to deflect while that's happening. So
anyway, Danny, get out of the street. Come here. Dan, inside. Get in here. What are you doing?
Takes a second just because I'm on the video, whatever this is, video phone.
Crazy talk. Pushing the limits. Pushing the limits. Okay. So, um, I forgot what I was saying.
America. So, yep. That's all I got for right now. My dogs are just kind of going crazy.
And then this is a little hammer tool, which not only chips off the residue that's left behind,
this is like slag kind of. Okay. You chip that stuff off. So it leaves you nice hammered welds,
but this also strengthens the welds. So while it's still hot,
you kind of tap them out and hammer them in and it actually makes the welds nice and strong.
Okay. It's super windy. Yo James down there. Okay. So we had to weld a whole piece of like
steel tubing right here because the roof had so many dents in it. It was a really bad one right
here. And no matter how much we put a jack stand in there and jack this thing up, it was just
popping back down. So we jacked it up on the inside and then welded this tube across here
and then took the jack stand out and it helped. But still, this is stuff that you got to think
about when you're buying a used container. There's tons of damage all over the place,
like bad rust spots that you got to go through and repair. This was a little test that we did
on the roof here. So there was like a product that we put on here that was like this
ceramic crazy paint. It was $300 for a gallon of it. And we're like, all right,
let's put it up against the rest of just white paint and then the siliconized roofing paint and
see what it did. So James had a little thermal gun and we went on the inside and from the outside
and it's about a 40 degree temperature from the steel to the white. And it didn't matter
which of the whites it was. So all you crazy fancy paints out there didn't perform any better
as far as the thermal, it said, in reducing the heat whatsoever. Regular white bare paint held up
and or didn't necessarily held up because we don't know how long it will hold up. But I've used
these products a bunch of times and the bare paint holds up amazing. So we're just going to
spray this whole roof with bare paint and turn the roof white. But we want to do a cool color
on the siding, but the siding doesn't obviously take as much heat load as the roof does. So you
won't see the roof up here. We're going to go completely white with it. And then we're going
to do like a charcoal on the walls because we wanted to do something cool, modern America.
And you can see we had an actual aluminum roof on this one, but that costs a lot of money. So
it's just something to think about. If you're not going to put a roof, then just paint the
roof white. If you have an old roof like this, we're likely actually on this one going to use
that siliconized roofing product that's white because it's a waterproofing as well. So that's
probably going to be the solution for this one. If you had a brand new container, I would just
probably just paint it white. Make sure it's nice and clean, pressure wash it, let it dry,
and make sure you just paint it white. You're never going to see the top of your container.
So you don't really need to do the crazy cool color that you want to do on the siding.
That's it. Okay. So it is super hot outside and I've had to change like 15 times because
it got super sweaty. Hey, no, no, no, no. Dogs tried to escape again. So coming inside because
there's like seven lawns getting mowed and trucks driving by and I can't even do it myself,
so we got all that done. Uh, you guys kind of got to see, we got a new 40 foot delivered.
We got the cutouts completed. We got the, uh, all the welding done, which went real nice and smooth.
And if you're wondering, it's a two by four, so it's an actual two inch by four inch, not like
two by four lumber, which is inch and a half by three and a half inches. But the steel actually
comes two inches by four inches. So this steel or the aluminum frames that we're going to be
installing in this, cause we're using storefront glass is actually four inches thick. So that's
why we picked that exact steel. You got to see that cool. We designed a new little lip at the
top of the windows that will kick the water off. I think I got super sunburned. Um, but you can
kind of see, you know, it, we, we've been modifying and coming up with new designs as we go, because
we've seen like, you really don't want the water to roll off the roof and then go directly down
the glass. So it's nice to have some type of drip edge or something. You can kind of kick the water
off the top. So that's what we went ahead and did design that. Uh, it also gave it a little bit
better of a waterproofing edge up there. So you got all that done. It was a little bit of extra
welding, but in the long run it will pay off. So on the next episode, we're going to be painting
the roof, which we kind of showed you a little bit, but we did some really cool thermal imaging
with the, uh, FLIR FLIR. Um, so company that specializes in thermal technology. So we did
some really cool tasks with a thermal gun that I own, and we were able to go in the inside and you
could actually physically see the areas that were painted white versus the raw metal through the
insulation. So that goes to show you how insane the, uh, heat reduction is just by doing something
as simple as white paint. But on the next episode, we're going to be covering that. And
then also painting the exterior and what we did to prep that used container to get to that point.
So as we say, make sure to like, and subscribe like every other person on YouTube. It does help
us. Um, that's it. That's all we got. We'll catch you guys on the next one. Contain luxury
and all these crazy puppies are out.
