The Best RC Monster Truck Going Into 2020? Traxxas MAXX 4S 4wd 1/10 Truck Review | RC Driver

Auto Associated
17 followers
12 Video Views·Oct 28, 2022
Okay, so we have a T-Max, we have an E-Max, we have an X-Max, and now we have the Max. Take a look at
this brute of a monster truck. This thing is very cool. This is a 1.10 scale four-wheel drive
electric truck, and I think it's a great addition to the Traxxas line. I think it fits right in
there between the Stampede 4x4 and the E-Revo, and it's based off of the X-Max, all the things
that we love about the X-Max. So I think this is going to be a great monster truck for backyard
bashers and those of you that just want to go out and do some crazy stunts and stuff like that.
This truck just looks incredible. I love what they've done with it, and there's a lot to talk
about, so let's start to get into some of these details here. And we'll start off with the body,
and now the body, it does have Traxxas' cool graphics. I mean, they just come out with some
killer stuff, and you know, I really like the orange paint job on this. It is available in
three different styles, this being one of them, and just looks very cool. Now on the body here,
you can see we've got the roof skid. We saw that on the Rustler 4x4, actually that truck over there,
so I like that they carried this over. It definitely saves the roof of the truck,
but it kind of has that X-Max style inner skeleton to it. So as you can see up front here,
there are some screws in the front, and let me turn this around so you can see the back. There
are these bars that come down, and this actually integrates into an inner skeleton that keeps
everything nice and solid in there so the body doesn't flex. But what's also great about it is
it doesn't use any body clips. And again, we saw that on the X-Max, we saw it on our Rustler 4x4,
and so it's really easy to, you know, just basically take off your body. You swing the
clip around in the back here. Let me show you. Swing the clip around the back here, and you
pull the body up and out, and it's got a little clip that slides in underneath. And I know some
people, they have a little bit of trouble with it, but you know, once you get used to it,
it really isn't that bad in my opinion, and it's much better than bent body clips or lost body
clips. I'd much rather just mess around with this. But beyond the body mounting system,
they've also got this rear deck plate to save the back of the body, actually. And you know,
again, it's just got a very cool look to it. Now, let me move on to the bumpers here. So,
of course, we've got some very cool monster truck bumpers, but you may notice there is some LED
lights in the front of mine. Now, the first versions of this kit, the trucks that went out
to hobby stores and stuff, Traxxas went and fitted it with their light kit. And the lights
are both in the front and in the rear as well. So basically, that was to show off some of the
options that they're going to have. When you go and order this from Traxxas, it won't have that
LED lighting system in it. It will be an option for you. Again, this is just for show, and this
is one of their show trucks that they sent over to us to check out. So that is really cool that,
these lights are on there. These are really bright. I've seen them lit up before. I haven't
lit up this truck yet, but when I went to the Nurses Show, I saw it there, and they are extremely
bright. So there is that option to go get that. Now, True Traxxas fashion here, the bumper,
it does have the shock absorption behind it. It's going to take some hits. It's got this lower skid
bumper on there. And the back bumper, of course, looks awesome. So let's pull this body off. Let
me just show you quickly underneath what it looks like. And there's that inner skeleton. Again,
just works really well. Definitely like that system. Now, let's check out the chassis on this
thing. And for those of you that have been drooling over a X-Maxx for a long time, it looks a lot
similar, doesn't it? Again, I said, they basically took this and scaled it down and refined it for
10 scale use. And I think they did a great job. I've been going over this truck and just lots of
stuff to love on it. So let's start off in the front and talk about the suspension on here.
So we've got really strong H arms for the suspension, both top and bottom here. And
there's a couple of different hinge pin styles in here. So we've got some screw pins on the top arms
and on the bottom arms, there are just standard pins. What's really nice about the bottom is that
the pins are secured in steel plates. So there's a lot of vehicles out there that use aluminum
plates. And we think that's really cool. Traxxas went with steel here. And yes, I threw a magnet
against it just to check it. So that's really neat that they have that. The suspension arms are
actually interchangeable from front to rear. So the right front could go on the left rear and then
vice versa for the others. So if you do go out and get some parts and something happens, you've got
that interchangeability between some of the parts here. And that does help out some people that are
hard on their equipment. So again, the suspension, I really like what's going on here. It just looks
really solid. If you come to the outside of the suspension arms, we do have a bulky caster block
and a really bulky composite steering knuckle. And, you know, these composite plastics, they feel
nice and strong and hopefully, you know, they hold up to the abuse. Now, I did notice there are some
little extra holes in the arms and stuff like that. So maybe later on down the road, they're
going to offer just a steel pin with a cap screw to hold it in place. But right out of the box here,
we do have those screw style pins. All right. Onto the shocks. These are Traxxas GT Max shocks.
So it is basically a scaled down version of the X-Maxx shock, their GTR style shock. And as you
can see, it's got this orangey red anodizing to it. It's got that big bulky composite cap on the top
and it has five millimeter thick shock shafts in there. So that is a really strong shock shaft,
again, for bashing use. And even the lower perch on the shock is screw captured. So it's not going
to pop off and, you know, your suspension is going to be flopping around. You know, the shock body is
threaded so you can go and adjust the preload on there. And that basically changes the ride height
of the vehicle. Comes preset from the factory, so you don't really have to worry about it. But
overall, the shocks on here are nice and smooth, like the way they feel. And they do have a pretty
heavy duty looking spring on there, you know, to top it all off. But definitely like the feel of
the shocks here. OK, now the basically the inner mounts of the suspension, as I mentioned, the
lower ones are captured. Even the top is captured as well. They do have an aluminum plate in the top.
So again, it doesn't allow that suspension arm to pull through the inner mounts there.
The inner bulkhead is really solid, lots of bracing between everything in there. And overall,
just, you know, built for maximum performance. That's what Traxxas is going for when they built
this truck up. Now, the rear suspension, I'm going to jump right back to the rear suspension.
Usually I work my way back, but it's pretty much similar. Like I said, you know, you could go and
take the front arm and put it in the rear. You know, it's basically the same setup. The only
difference is on the outboard side, we've got really strong composite hubs. And what I like
about it is it's its own hub. It's not a steering knuckle and caster block with a tie rod. So I like
the suspension geometry much better with this style of setup. And I think it's less parts to
break as well if you're out there bashing really hard. The shocks are basically the same front and
rear. Again, nice and smooth. And of course, it's got all the steel bracing plates in the back as
well. All right. Now, let's go to the chassis on this because I love the look of the chassis on
here. Just something different. It's a high clearance chassis. And, you know, it's just
kind of Traxxas. It's like their X-Maxx. It's, you know, got that cool look to it. It's got a
little extra clearance in the center. So when you're going over the rough stuff, nothing hangs
up. And it's just really built to be solid. I mean, there's a lot of honeycomb bracing in the
center of this. There's an upper brace as well to capture the steering, to keep things stiff.
Even the shock tower housings basically, I mean, just integrate right into the chassis. So
everything is strong. You're not worrying about things flexing and stuff like that. And I like
how everything interlocks together. This is a very cool setup. And the great thing about it is you
don't have to worry about it bending. Some aluminum chassis out there bend if you crash them really
hard. But this thing is really well built. Now, some of the other things I noticed on the chassis,
it's got these nice little rails on the side here to kind of protect the side of the chassis. And
it kind of captures the body. There's a lot of trucks out there where the sides kind of flop
around and stuff like that. And it's just kind of keyed in here. So I like that little detail.
The other detail that's pretty cool is this sliding battery mount. You kind of just
pop it out here. And it's really solid, actually. It's got a really hard snap when you pull it out.
But you flip it up here, you put your battery in, and you go and clip it back out. It slides
around, which is pretty cool. You can actually fit a number of different Traxxas batteries in here.
They've got a foam block in here. And they have some instructions on how to mount some of their
other batteries. But right out of the box, you can put their 3S batteries in there and their 4S
batteries. Now, I've seen some people talk, well, I can't put my standard battery in there. And yeah,
I can understand that. But Traxxas has their own system here. They've got their ID plug.
They've got their batteries set for their specific electronics. So I kind of understand
why they go and do that. And if you want to go and modify your truck, I mean, that's up to you
to do. But Traxxas has their system. I understand why they do it. I understand why they go with the
plugs for safety and warranty issues and stuff like that. So I am not going to hack them for
that. I completely understand. And for those of you that may be like, I don't like that. Well,
I got some news for you. I think a lot of other manufacturers are going to start going to
proprietary plugs and battery types for warranty information. Traxxas did it first. So just be
aware that's probably going to happen later on down the road. So we don't really need to beat
around that topic anymore. Let's go on to some of the other electronics here now. We do have the
X-Maxx size servo in here. It is a plastic-geared servo from what I could tell. The output spline
was a plastic when I took a look at it. So I got to imagine everything else is in there. It's a
large servo, kind of a proprietary servo. However, they do offer an optional plate that you can put
in there to use standard servos. They went with this servo, I think, because it's got 285 ounce
inches of torque, which is a lot, which is what this thing is going to need. So I understand why
they use it. And they do have options for that as well. So I think it's going to work just fine.
And we'll see how it does, of course, in the testing. Right next to it is a sealed receiver
box. We've got our TQ receiver in there with the TSM. And that's going to be a lot of fun,
help this truck out for those of you that are driving it really wild. I like that it's got this
little rubber cap here so you can pop it off and access the button if necessary without pulling
the top off like some other receiver boxes out there. A pretty slick setup. Right behind it is
the VXL 4S speed controller. This handles up to 16.48 volts. And of course, it's going to handle,
our 14.8 volt battery, our 4S battery that we're going to put in here. But this is just a massive
speed controller here. It's got some massive 10 gauge wire on it going out to that ID plug,
huge fan on top to keep it cool. And when I was talking to the Traxxas guys, they said,
notice how it's the same size as the 6S and the 8S version, just throwing it out there.
So I bet you some people are going to do some wild projects with this thing,
push it to the limits. And I bet you that's going to be a lot of fun. Right behind it is their 2400
motor. I think that's going to offer plenty of power for this vehicle. And what's really great
is they have a heat sink here on top of it, an aluminum heat sink with a fan stock out of the
box. And the fan not only clips in place, but it also screws down in place so you don't have to
worry about that popping out. And it definitely is going to keep things cool. Now, let me just
show you this really quick. So right here, this is the Traxxas high voltage power amplifier,
and this basically powers those LED lights in the front and rear. And again, that's not going to come
with the kit when you order it. That will be an optional item. Again, this is just for the display
model here. It's really nice how everything just plugs in nicely. I mean, even the wires for that
power module have some braid over it to keep everything looking nice, plugs right into the
speed controller, even clips in so it doesn't pop out and everything nicely secure. We got zip ties
all over the place. I'm starting to notice a lot of fine details in Traxxas' assembly. You know,
when I reviewed the TRX-6, everything is nicely laid out as far as the wires go. You don't have
to worry about things flopping around. Same thing here. We've got zip ties holding all the wires in
place. So again, very cool on the details. Now, I've gotten all the electronics out of the way.
Let me talk about the steering really quick. The steering up front is a twin crank steering system.
It's got a servo saver built into it. We've got a composite Ackerman link between the two,
and the steering links on the outside are just composite links. They're not adjustable,
and to be honest, you don't really need it. It's set up perfectly for what you're going to need
for bashing use. You don't have to worry about tie rods changing or bending or anything like that.
You know, steering system looks solid, and I like that it's supported by ball bearings,
so it's got to operate nice and smooth. Now, finally, I think that leaves us with the
drivetrain on this, and we've got a really solid drivetrain in here. I'm going to start back here
with the pinion and spur. Quick note that the motor is attached to an aluminum motor plate,
as you would expect, but it's got a massive pinion in here that goes over to the spur with
push drive on it, and that's what we saw over in the X-Maxx. Just helps with shock to the
transmission of this, but that push drive and spur gear transfers to another metal gear that goes
down to a center differential. So we've got three differentials in this front, center, and rear,
and that will, of course, distribute power the way you need it while you're driving it.
But I took a look in there. I mean, everything was well greased. I like the look of the metal
gears. It's all one-mod gears inside, so it's going to take a lot of abuse. I even popped out
the front differential to take a look at that, and really nice solid-looking gears on there.
Even the spline drive to the center aluminum shaft, that was metal as well. So again,
the drivetrain is definitely bulked up on this to take all the power that you're going to put
through this, and some people are going to put 3S power and 4S power, and I think even more once we
really start to mess around and modify this thing. But the differentials, they are oil-filled,
and then they go out to these composite plastic slider driveshafts. Now, I took a good look at
these driveshafts. They are a pretty heavy-duty driveshaft, considering they are composite. Not
sure why they went with a composite driveshaft, since we had steel driveshafts on the X-Maxx,
but at least they did go and really bulk up the yoke area on this. The cross pins are really
huge in the universals, and even the driveshaft is keyed, so it just doesn't slide in. You have
to make sure it's keyed properly, so they slide in together. It's impossible, basically, if you
don't line up the key to slide these together. So there's a lot of engineering behind the
driveshafts. I think they're going to hold up, and we'll definitely see how it does, again,
during the testing on there. But it is bulked up. Now, on the outside, the driveshafts go out to
17-millimeter hexes. Now, it's a composite hex, which I probably would have liked to have seen
aluminum there, but I do know that there is already aluminum option out there, if you do
want to go and swap it out. There is a 8-millimeter nut on the outside, so just be aware of that. They
do give you the tool and the kit, which I'll show you in a few minutes. But really solid drivetrain.
I think it's going to work well. Of course, everything rides on ball bearings. And I do
have to say, it does take some work to get the differentials out of here. Again, I took it apart,
so I could show you guys the differential in there. And I did have to take apart a lot of
the front end to get at those. So hopefully, you don't have to tune those a lot or maintain them
too much because it will take you some time. And I do think you need an electric driver to do it.
Otherwise, you're going to be wrenching for a long time. Now, the tires on this thing, they are the
max all-terrain tires. They are TSM rated, so they're not going to expand a lot when you're
just ripping on the throttle here. They are mounted on these very cool black spoke wheels.
I do like the look of the wheels. Again, they are a 17-millimeter hex. They have this blue washer
on the outside that basically the nut pushes against to stabilize the wheel. I think this
tire combination is going to be a lot of fun out there, rip up some dirt. All right, I think that
really just leaves the wheelie bar out back that I didn't show you yet. And you've got a dual wheel,
wheelie bar out back, kind of flexible and should help keep the front end down a little bit when
you're ripping some speed runs and stuff. But overall, really cool looking chassis. We've got
these skid plates on the bottom here. Even the lower section is enclosed. This is where the drive
shaft runs through under here. The bulkhead assembly looks pretty solid. Again, they just
did a great job in designing this. I think it's going to be a lot of fun. Now, let me show you
the rest of the stuff that it comes with. It does come with the TQi radio system. It is link-enabled.
You will need the module if you want to take advantage of that. But you can access a number
of different functions through the radio system here using the buttons and the knobs. So you go
and address a lot of the trim features. But the link module makes it a lot easier. You can do it
through your cell phone with the link app. And that's typically what I do. I put the link module
in there when I go to test trucks. Makes life a lot easier. Then we've got our usual bag of goodies.
And let me just show you the stuff that's in here. This is actually a battery spacer plate. Let me
pull this out of the bag here. And this is for use with one of their 4S batteries. Traxxas' 4S
batteries. The battery that we're going to use in here is part of a set that I have. I'll show
you in just a minute. And again, it's just to help secure the battery pack. Now in here, we've got
some basic tools. So there's your wrench to pull the wheels off and some Allen wrenches.
And then we have all the usual paperwork. So we've got your registration information here. We've got
a little sheet on how to use the TSM for different types of applications. Some more support service
stuff. So definitely check that out. This is a little sheet that I actually really like. This
shows you all the different things that you can do with the link module and stuff and all the
different option sensors that you can get for it. So you can check stuff out. This is about their
battery. So definitely go through that. When you're going to pick out your battery system,
if you get your truck first, and then of course your manual that gets you up and going with the
truck. Now I do want to go and show you the battery system that I'm going to use with this
from Traxxas. Just makes life a lot easier. So they have these starter packs. I have the 4S starter
pack here and pop this out. It's basically just a nicely packaged version of the two components
separately here. So here's the EasyPeak Live charger that I'm going to use. And then I've
got my 4S battery pack here as well. This is a 5,000 milliamp pack. Actually, there's nothing
in here because it's outside right now charging up while I'm doing this video. This is just going
to make the truck a lot easier to get up and going. They do have an app for the charger as
well. So you can monitor your battery as it's going from your phone. Very cool stuff. The only
other thing you're going to need, four AA batteries for the remote, and then you could go. And you
know what that means? It's time for us to go. I can't wait to go drive this truck. Let's go see
what it could do. Man, flying dirt, big air. It is time to talk about the performance of the Max.
And to test this vehicle out, took it over to a few of my favorite bashing spots, a BMX track
and a dirt field. And I put this thing through the paces, guys. I know there are a lot of eyes
on this truck. You guys want to know all the details about it. So I really beat the you know
what out of it, just trying to get all the performance information I could to pass on to you.
So let's get into the details. Now, out at that bashing field, it was taking a beating. There's
a lot of rocks out there. It's one of the only test spots I have where I could go and just do my
thing. But what it does is it kind of shows you how durable this truck is. And it took a lot of
hard hits with all those rocks out there. But I'll get to the durability later. Actually,
the suspension on here worked pretty well. It was kind of bouncing around. I think the stiffness of
the tires kind of translates a lot of that rough stuff into the chassis itself, into the suspension.
You know, you could see the suspension working over time to keep this thing stable. And I did
actually flip it a lot. It was a really rough surface. And for the most part, I got to say it
did a good job, you know, over some of the jumps and stuff like that. You know, I got some good air
off of it. Not as big of air as I thought I was going to get out of it. But still, it jumps nice
and smooth. You know, it's easy to pull out of awkward landings and stuff like that because
there was a bunch of times where I just sent it off the mound of dirt and went flying and I was
able to easily correct it. So I do like the maneuverability of this truck. I do like the
control factor of the truck. But I did have to put some wheel time in there. I had to work the
steering to keep this thing planted in where I wanted it going. But it is a stable truck. I could
see the TSM working a bit, trying to keep everything stable. So all the functionality is
there. It really just, I think, depends on where you're driving this thing. Because when I took it
over to the BMX track, that's when this thing handled a lot better. It was a much smoother
surface. You know, it's a BMX track. It's groomed. So over there, if this thing just floated over the
smaller bumps, through the air, over the jumps, it would just glide. And that was what was really
cool. You could just come up to a jump and just let off the throttle and you just watch this
truck soar nice and smooth over the jump and lands nice and plush. Now, as the jumps got bigger,
that's when I really started to hear the chassis slap on this thing. So again, you know, it's
dependent on where you're driving this thing. If you're going to go big with it, you're probably
going to hear some chassis slaps. You might want to go and swap out the oil in this thing.
But if you're just going over some nice medium jumps, as you saw there on the BMX track, I mean,
you guys saw the difference between, you know, the big jumps and the small jumps, how this truck
reacted. But the medium stuff, it was just so smooth, so enjoyable to drive, and just a lot
better on that smoother surface. Now, onto the steering of it. You know, when I put this thing
on the bench, turned everything on, the servo sounded a little sluggish, actually. But then,
out there, you know, testing it, I didn't notice anything. The servo had plenty of torque, in my
opinion. There was definitely no problems. I'm going to talk about durability. No problems from
the steering servo as far as those plastic gears and stuff. But just basically plenty of steering
on tap all the time. The only issue I had with the steering is it does carve a tight corner,
and with these tires, there was a lot of traction in the loamy stuff. And because of that, it would
just kind of hook and roll a lot. So, that's something to be aware of. Again, you know,
surfaces. I think this is a little surface finicky. When I was at the BMX track, and it was a hard
pack surface with just a light coating of dust on top of it, it would slide. I could get around
the corners nice and easy. There was no roll. So, loamy stuff, you might hook and roll over the
traction roll. But on smoother surfaces, I think you're going to have a lot more fun with this
truck. All right. Now, on to acceleration. I mean, this thing is just a power monster. It's got plenty
of power on tap. I was running a 4S battery for all of that testing there, and it would just rip
wheelies all of the time. And, you know, kind of, you got to watch out for the power, because going
through those turns, you know, again, if it's a loamy surface, and you want to go and, you know,
whip the truck around and get some dirt flying in the air, it kind of hooks. And if you pull that
power, it will just kind of diff out and just roll really quickly over on the rear wheels.
So, that's something to be aware of as well. There's a lot of power in this truck. So,
you do have to drive this truck. You do have the TSM in there to help you out,
but depending on the surface, you might have to put some more wheel time in. But it's totally
worth it. The power in here is incredible. Just ripping up and down some of the straightaways
there. It was fun to watch. It was fun to watch the suspension work on the truck,
on the flat ground. I mean, it was just spitting up rocks everywhere. So, this is definitely an
action-packed truck. They built this truck right. You know, it could maybe use a little tuning,
depending on how big you want to go with it. But I think for the majority of people,
it is set up just right. All right. Now, on to the durability stuff. And there's a couple of
things that I do want to point out. One thing is nothing broke. So, that's good to report.
I was beating this thing up pretty hard. You guys saw what I put it through.
But a couple of things did happen. So, on one big jump, I landed directly on the nose of this truck,
and I thought I was going to go and collect parts. And the only thing that was wrong with it is the
body popped out of the front. So, you know, no big deal. I just kind of unclipped it,
slid it back in place, and I was ready to go again. The other thing that happened to me is
I went big. And the last jump of the day at the BMX track, I went off the berm. I sent this thing,
it had to be, I don't know, 50 feet away, maybe 20 feet high, 25. I'm not a good judge of
distances. But anyway, I went big with it. I went far with it. And when I landed it,
after doing a backflip, the battery came unplugged. That was it. The chassis hit hard. I mean,
the slap echoed through the valley where the BMX track is, but nothing happened to the truck
itself. It is a durable truck. The only other thing I want to point out, and it was a little
bit frustrating. I was really excited about these sliders on the side of it where it keys into the
body. So I thought, but if you do roll this thing over, the body pops out and goes over the outside
of the slider. So you see the body flare out all the time and I was always pushing it back in.
So that's something I, you know, maybe I'm just going to pull these sliders often. So I don't
have to deal with that anymore. A little obsessive compulsive on the way things looked. And so it's
always pushing the body back in, but that's it. There's nothing else to report. The temperature
on the electronics were fine. I also tested the self-righting function a couple of times. That
seems to work flawlessly. Even the TSM adjusted a little bit to kind of fit my driving style a
little bit better. And I really liked that adjustability that comes with the truck. You know,
TSM just makes it so easy to get the truck dialed into the way you like it. You know,
no wheels getting loose or anything like that. I mean, even the LED lights are still working.
And when those things take a hit, they usually break, but nothing went wrong with those. Again,
those are aftermarket, but they're on the truck. So I want to let you know about that. Oh,
one more thing about the LED lights that I didn't know about is when you use reverse white lights
come on, on the rear of the truck, letting you know, the truck is backing up. I thought that
was very cool. That extra detail that Traxxas has in that, but this is going to be a fun truck for
a 10 scale truck. It's a great truck. It's priced at about 550 bucks, which is a little bit on the
high side. I probably would have liked to seen the four 99 deal on this. Uh, but you know,
it's worth it. It's a beast of a truck. I know they're going to have some excellent upgrades
coming for this in the future where you could really go and customize it. And I think it's
just going to be an exciting addition to anyone's RC collection. You know, if you've been looking
for a 10 scale truck, that's just overpower, it's going to deliver big air and lots of speed.
I think the max is definitely a truck you should consider.
