The Best Camper Builds - Built 4 Adventure - Mountain State Overland

The Explorers
19 followers
5 Video Views·Oct 23, 2022
We are at Spruce Knob, Experience Learning at Spruce Knob, and we have a bunch of friends
and guests that all have Allocab Canopy Campers, not all of them, but there's several, and
a lot of them are custom builds.
So we're going to feature some custom build outs of the interiors of the canopy camper
products and see how creative people are getting.
The best products and best service from people who care and love what they do.
OK 4WD, outfitting vehicles since 1979.
Hey, I'm John.
This is my 2021 Tacoma with a 5 foot Allocab Canopy Camper on it.
It's a homemade Baltic birch interior with a couch or bench seat in the back, which is
perfect for your like 25 pound terrier.
Terror or terrier?
Terrier.
Possibly a terrierist, it depends how quickly you approach her.
Yeah, she's a little tired from all of the driving today.
Like 120 miles of gravel and back roads.
We have the Expedition Essentials 10 pound propane mount, the Allocab Can Crusher, which
comes in handy.
Full width drop down table with bamboo cutting board.
This is the quarter rear window, which opens out unlike the side door window, which opens
in.
Paper towel holder, which is super convenient, especially when you're cooking dinner and
just need to grab one.
Some awesome homemade pouches from my wife.
She did an awesome job with those.
It was a little bit about lead times, I just wanted something quickly and Emily's dad has
an awesome wood shop in Lancaster, Pennsylvania.
We just decided to go home for a weekend with him and see what we could do.
We have a wood floor and then two side panels and then on either side, there's hatches that
open up.
So it's a little less complicated than drawers to construct and then you can just pack everything
in there.
So on this, everything is bolted directly to the canopy camper and nothing's bolted
to the truck bed.
So install is super quick and it could pop out easily and there's no holes through the
truck bed itself.
But we wanted a spot where we could hang out in inclement weather and enjoy the GP Factor
fireplace and other creature comforts that the canopy camper can provide.
So this is one of the old school GP Factor electrical boards.
We have the Red Arc BCDC 1240, which pulls power from both the solar panels on the roof
of the camper and then the engine of the truck when it's running, which is awesome.
So it always keeps your battery topped off pretty full.
So you can power stuff like a little fridge, lights and other accessories.
So this is the GP Factor side window hatch.
It's a little Lumar port light hatch, so it's designed for a boat.
So it's completely watertight.
So what would you change if you were to do it all over again?
I'm getting signals from my wife here.
In the back half of the camper, very similar port light hatch, but just for a sunroof in
the back so we can like stargaze from the camper.
Hi, I'm Paul.
I'm Bethany.
Welcome to our crib.
All right, so this is our custom AluCab canopy camper build.
So we did the whole interior ourselves.
The top is a wood, it's a cedar that's from my parents' house.
When they bought their retirement home, it had a sauna in it that they no longer wanted
and the wood's been sitting in their attic for probably about 10 years.
So Bethany's dad is really good with woodworking.
So he was able to help us pull it all together, both the countertops and then helping make
the drawers.
He has all the equipment to help make the drawer systems.
So I made the drawer pulls out of leather deer hide that Paul's grandpa has collected
over the years from all the deers that he and his wife shot and he had tanned.
And I cut it into thin strips and then wove it into a thick cord, I guess, that like I
used to make necklaces out of in high school, so I used the same pattern.
But it's been kind of fun because we've taken it now on three trips and each trip we've
had a little bit more done.
And so it's been nicer, you know, like this is our first trip with it like fully furnished
and I would say like complete for the most part.
I like to do things myself, I think that's part of the fun-ness of getting the canopy
camper is you get to customize it and build it the way you want it.
So I like kind of that challenge and having that touch of personalization like the countertops
and the leather pulls.
