SIG's WWII Semiauto Rifle: The Model U

Military Rifle History
1 follower
8 Video Views·Apr 16, 2026
The SIG company of Neuhausen Switzerland spent the 1920s, 30s, and 40s working on developmental semiauto rifles to sell both to the Swiss military and abroad. One of the experimental models in the succession of designs was the Model U, of which 16 were made in caliber 7.5x55mm Swiss. It was a gas-tappet operated action with a tilting bolt, and included a permanently mounted 1.8x optical sight on the left side of the receiver (the same type as used in the K31/42 marksman’s rifle). The Model U was made in 1942 and 1943, to typical Swiss levels of quality and precision. Like the designs both before and after, it was a valuable iterative step for SIG but not a rifle which would find any military or commercial sales.
Hi guys, thanks for tuning in to another video on ForgottenWeapons.com.
I'm Ian McCollum, and I'm here today at the Rock Island Auction Company
taking a look at some of the guns that they're going to be selling in their
upcoming April of 2018 Premier Firearms Auction.
And one of them is this very unusual and very interesting prototype
SIG Swiss self-loading rifle. This is a Model U,
and it is one in a whole series of semi-automatic prototypes that the Swiss,
well SIG, was experimenting with from the 1920s
all the way through the 1940s. Ultimately Switzerland would adopt the
Sturmgewehr 57, which is a roller delay blowback action
rather similar to the HKG3, but they had several decades of
experimentation before they got to that point.
Now the Model U fits kind of in the middle of this series. These started in
the early 1920s. The Model U was manufactured in 1942 and
43, and they made a total of, I believe, 16 of these. The serial numbers are in
the 70s and 80s. And this is because SIG
manufactured, or numbered, all of their prototype rifles in a single
continuous series. So the next major rifle after this one
was the SK-46. Those have serial numbers in, I believe,
the 90s and low 100s. That's just how they did it. Now over
time, as SIG made these different designs,
they got a little more streamlined and a little more practical every time,
but they're all pretty darn Swiss. So what we have that stands out on this
one is a short stroke gas, basically a gas
tappet system, with a full length operating rod. So the
gas ports up here, but the gas piston is very similar to that of the M1
carbine. It has a tilting bolt that locks up into
the roof of the receiver, and then just typical Swiss complexity
and machining perfection to everything. The one other really interesting feature
of these is that they do all have telescopic sights on the left
side of the receiver. These are permanently attached,
and they are the exact same style of sight that was on the K31-42,
which was the sniper marksman's version of the bolt-action K31.
This is a whopping 1.8x power scope. It's a little tiny thing. It does have
range adjustment out to 8,000 metres, and it's got this cool ...
periscopic sort of objective lens on it, which
I'll show you in detail. Here on the rear receiver cover of the rifle we have the
primary markings. This is SIG, Industry, the official
spelling at this time, and for a while before was actually with a J.
That's not misspelled, that's how it's intended to be,
and that's S-I-G or S-J-G. Neuhausen is the location in Switzerland.
Model U, and this is number 75. Now this range adjustment leaf is
actually for adjusting the scope's point of aim. They have this connected to a
little cam built into the scope, so as I push
this forward you can see that this cam pivots, and
that's going to change the position of the reticle inside. So as you
raise that up it adjusts for range out to,
well, allegedly 1,000 metres. Good luck shooting at 1,000 metres with 1.8
magnification though. We also have a second leaf up here on
the front of the rifle, which is the actual iron
sight, and it works the exact same way except it's not built into a scope.
Now should you be using the actual iron sights or transporting the rifle, you can
take this and snap that down into
the side of the stock there to kind of keep it out of the way.
That's a little cool. And just in general this is a very low profile, very small
optic, so it doesn't really add much to the weight or bulk of the rifle to have
it on there. I'm sure the Swiss were experimenting
with the idea of making an optical sight standard on all of their rifles, although
they would choose not to do so when they eventually
adopted the Sturmgewehr 57. A couple controls to look at here. We
have a safety lever on the side, obviously forward, F, fire. S and F
conveniently stand for safe and fire in English, and
Seeker and Feuer, safe and fire, in German as well. In fact
beyond that they'd also stand for safe and fire in French, so very
convenient for the Swiss. We have a pretty standard
bolt handle. This does lock open on an empty
magazine. You'll notice that there is this large cutout at the top.
That, although I haven't tested it, I'm quite certain
is sized to use K31 pattern or G11 pattern six round charger clips.
In order to close the bolt we have a bolt release back here
which allows that to close. Now you'll notice
if I don't give it much ... space to start, the bolt doesn't entirely
go into battery. And keep that in mind because you'll see why when we take it
apart. There it is fully in battery. You see the
bolt lifts a little bit higher. Lastly for controls we have a magazine
release here. Like the K31s, G11s, K11s etc.
these magazines have a latch on the magazine themselves.
This one is helpfully marked with all sorts of information. It's a SIG
Neuhausen, a Model U. It's in calibre 7.5, which would be 7.5x55 Swiss.
This is the magazine for gun number 73, slightly mismatched.
And that 12, I am quite sure, indicates a 12 round capacity, which would be
two full standard charger clips. We have a little bit of a ventilated
handguard up here at the front. Handguard and stock go basically all the
way to the front of the gun. Bannet lug, very Swiss pattern hooded sight.
A nice square, precise, easily adjustable front sight as you would expect.
And a sort of semi-pistol grip, very much like the Schmidt-Rubin
rifles and carbines. Now let's take this thing apart.
Begin by removing the magazine. Next I want to remove the bolt.
So I am first going to lock it open, like that.
Then we're going to take this lever and pop it over into this position,
and put the gun into safe. Then this top cover pivots up and comes
off of the gun. Just that piece alone, I think,
has more machine time in it than a late war Kar98k.
Now the bolt is handily back here, where we can access it.
And I can just lift the bolt right out of the action.
Now the locking surface for this is the very front edge of the receiver wall,
right there. It's hard to get a good angle on it,
but this flat surface right at the front. Now in its locked and ready to fire position,
the bolt looks like this. And this surface right here
is what's locking up against the top of the receiver.
The firing pin is down here, and this would be equivalent to having just fired.
So you can see that the firing pin is protruding through the action,
the front of the bolt face, I mean. This is the striker itself right here.
This little surface right down there is what hooks onto the sear.
And you can see the sear right there. So when I pull the trigger,
that sear drops down and releases the firing pin, or the striker.
And then when the bolt is actually cycling, this snaps back up together.
That forces the striker tail up, where it's going to hit the back end of the bolt face.
That prevents the firing pin from coming out the front of the bolt, so it can't fire.
It then puts ... this wedge is what actually pushes this all down and out of connection like that.
So when this goes to lock up, it has to actually push this apart like that.
Now you remember just a minute ago when I was dry cycling this thing,
you had to give the bolt a fair amount of space to get going in order for it to lock up completely?
That is because of this block. So if it didn't have enough speed,
it didn't have enough force to snap this down and split this piece away from the bottom of the bolt.
I don't know if it comes across on camera, but it takes a fair amount of energy to do that.
Not a whole lot else on the bolt. Point out we have a big long extractor spring right there.
This is going to eject out the top. That little cutout is for a fixed ejector.
Actually, I should point out we do also have this lug on the side of the bolt.
That lug sits in this recess right here, and you can see there's a little cam on the bottom.
What that does is when ... this is the operating rod, by the way, connected to the bolt handle.
When this goes all the way forward, it's going to force the bolt up against this surface and into battery.
Now in order to show you the operating rod and the gas system,
I'm going to have to take the action out of the stock. So I'm going to take off the two barrel bands,
and these two screws that connect the trigger guard up into the action.
These guys, by the way, have locking screws. So what I have to do first is rotate this
into alignment with that screw.
There we go, and then
I can unscrew
this.
All right, we've got the action screws done. Now the front barrel band has a screw and a hinge,
so we'll just take it off completely.
There we go.
And then the rear barrel band doesn't have a hinge, so we'll just loosen it and then we can slide it past that.
There we go.
Now the handguard just lifts right off.
And then I can take the stock
off of the action.
All right, now we can see what's going on underneath. We of course have a mainspring
right here. That's on a guide rod connected to this block.
And we have a very long operating rod, which is going to connect here,
hits the bolt handle,
and then the operating rod comes all the way forward out to
the muzzle here.
So that goes backward.
And in fact, you can see that when I push this back,
see that this guide rod is connected
all the way back there.
And then what's actually motivating that is this
little
gas piston right here
that comes out like that, gives a smack to the operating rod,
and stops. So
that only goes that far.
Very similar to
an M1 carbine. So there is a gas plug here that I can unscrew. In fact, it's kind of weird. This
is just like a locking screw. So once this is back,
then you can unscrew this, which is just a plug in the front of this cylinder.
And then
the fact having this plug in place
prevents this from rotating, which is what I believe is setting the gas block
in place. So
set the gas block. This goes in to set the right spacing for it. Then you screw in the gas
plug,
which is in one of the, fits in one of these little concave
gaps in this nut. And then you screw this down on top to make sure that this can't back out. So there's like
three interlocking reinforcing bits here to make sure that nothing moves.
Anyway, for all the expense and the machine time that went into this, it's not actually that complicated
of a system. It's a gas tappet and a very long and extravagantly manufactured operating rod.
And the trigger mechanism is kind of the same way. So we've got a whole bunch of stuff moving with the trigger here,
but ultimately what it's doing is just pulling down a lever here, which ... pulls down the sear.
You can't see it now because I'm in the safe position.
Safe. Fire.
But what this does is ultimately just drop
that sear
to allow the firing pin, the striker, to go forward. There's a disconnector right here
that's going to
push up. You can see it moving
these.
That resets the trigger so that when you fire one shot the trigger resets and it doesn't fire fully automatic.
There's not a whole lot more to this really.
A lot of machine time went into it. If you gave this project ...
Well, I want to say if you gave this project to the Germans in 1944,
they would figure out a far simpler way to have done it.
But then again, some of the German Volkssturm rifles ... have ludicrously complicated trigger mechanisms like this anyway, so
give it to the Americans. We'd have figured out a simple way to do that.
So pretty cool to get to see another one of the building blocks of the SIG semi-automatic rifle
experiments and prototypes and the whole developmental series. If you're interested in the other guns that were in this series,
definitely check out the playlist that I have linked at the end of this video, which
covers a whole bunch of them, all the ones I've been able to do video on.
And if you would like to add this rifle to your own collection or start your own collection of SIG prototypes,
well, take a look at the description text below the video.
You'll find a link there to Rock Island's catalogue page on this rifle.
That has their pictures, their description, their value estimates, and everything else you would need to know
to place a bid on it, either through their website or live here at the auction in April. Thanks for watching.
