Secrets Of The Marie Maersk Container Ship _ Richard Hammond’s Big.

Chosen Realm
63 followers
14 Video Views·Nov 18, 2022
The Marymask is one of the biggest moving objects ever built.
I've come on board to find out more about this titan of maritime engineering
and to discover how enormous ships like this
affect all of our lives all over the world.
This isn't just the story of a very, very big boat.
It's the story of pretty much all the man-made stuff in the world.
Pretty much everything we buy will be moved from where it was made
to where it needs to be on one of these.
This gigantic container ship
travels a continuous 45,000-kilometre route between Asia and Europe,
a task it was designed to do non-stop for the next 25 years.
Currently, it's heading towards Rotterdam, the biggest port in Europe.
This ship is big.
Really big.
Fully laden, it'll carry over 18,000 metal containers
like the one I'm under right now.
And let's not mess about with feet and inches or metres.
It's a quarter of a mile long.
The ship currently weighs over 250,000 tonnes,
but only about 63,000 of them are actual ship.
And I'm not just talking about the containers you can see.
There are even more in the hold.
The Marimersk carries its shipping containers stacked in columns,
23 across its width and 24 along its length.
And because there's no deck, the containers can be piled up to 21 high.
Right now, Joe is going to show me one empty section on board
that'll be filled at the next stop in Rotterdam.
Joe, I don't think much of your stairs.
Oh, my God!
That is a huge... That'll be filled with cargo eventually.
In the next port, we're going to go fully loaded. That's the belly of the ship.
That's huge.
You're obviously used to steep stairs.
Ah, so this is the hold.
This is what the whole ship's about.
In this cathedral-like space,
we're actually more than 10 metres below sea level.
This is an enormous building.
And this is not the whole hold, is it? It's not all of it?
No.
Hang on, this isn't even full height, is it?
Cos I go up above...
Double it.
So, double this in every direction?
Basically, yeah.
That direction, that direction and you've got one of 11 holds.
It's... I honestly think my brain is struggling to get hold of how big it is.
Fully loaded, this ship carries a whopping 18,000 containers.
If they were placed end-to-end, they would reach all the way into space.
It's kind of spooky.
It is kind of spooky and it can get spooky when you're sailing
because of the wind and the waves.
You get these noises that are unexplained
and a lot of the crew are superstitious.
Oh, that's proper maritime still.
So, there's a sort of a sense of it being a bit haunted and a bit...
I totally get that.
I would not like to be left here on my own
with a torch with slightly fading batteries.
But you might be wondering how these sometimes lethal
and often very heavy containers are pushed across the water,
all 18,000 of them at a time.
Well, this is the first supersized container ship
to use side-by-side engines,
powering two bronze propellers that cost $1 million each.
Look at this simply gigantic engine.
The crankshaft is bolted to this enormous flywheel,
which is now number one on my top ten list of places not to get your tide call.
And that, in turn, is bolted directly to this propeller shaft.
There's no gearing.
There's nothing between it and the engine.
They're just bolted to one another.
And now I'm tingling all over.
I'm not joking, as we go along the propeller shaft,
moving towards the very end of the ship.
Come on in. See if you can get in.
Oh! Oh, that is...
That is genuinely eerie,
because just the other side of this steel here,
at the end of that propeller shaft, is the propeller.
Seventy tonnes, ten metres across,
turning with unimaginable force.
And there's only one place in the world
that can manufacture propellers this size.
This is the town of Warren in northern Germany.
On the surface, it doesn't scream birthplace
of some of the world's biggest and most complicated propellers, but it is.
This factory has been making propellers since 1948.
They made the propeller for our ship.
They don't do small.
As they pour the molten alloy from the furnace
into the rather delightfully named pan,
which sounds like something that belongs in the kitchen,
I'm just aware of raw energy, a lot of it.
If I fell in there, I would simply cease to exist.
I don't want those splashes to get any closer to me.
I'm just going to back up.
Right, that is the metal coming out of the actual furnace here.
Here it comes. It's like a living thing.
Call me weird, but I've always wanted to see something cast like this.
It's just a kid in you.
It's also really, really, really hot.
Like, really hot.
It takes ten days for the propeller to cool,
after which it's still far too rough to cut through water efficiently.
It needs polishing, and this is where years of skill come into play.
After all the automation, this really is hand finishing.
As much as if he was running his hand along it to do it.
The operator's movements are replicated by the remote arm.
It's like an extension of his body.
These propellers are finished to a tolerance of tens of millimetres.
So, this guy is an artist of incredible precision.
Because in real life, that isn't just a beautiful thing, a piece of sculpture.
It's got a very, very big job to do for the next few decades.
Gerald makes it look easy, but he's got 20 years of experience behind him.
Well, instead, I can have a go. So, here goes.
Not surprisingly, on a piece of scrap, not on a million-dollar propeller.
So, this... Oh, it's alive. Right.
It's not as intuitive as I was hoping.
Right, it's now working.
This is the world's biggest tickling stick. Right.
It's really difficult.
I'm guessing that the artist is perfectly straight.
Right.
Or the pressure it applies
is related to the pressure you apply with the machine.
You don't just push it on and then just leave it there.
You finesse it. Look at that hole.
I'm going to leave that there
and not apply for a job as a professional propeller grinder.
After a professional polish, not by me, obviously,
the 70-tonne propeller is ready to leave the factory.
The more I see of the effort and artistry
that goes into crafting this beautiful, sculptural thing,
the sadder it is to think that, just like the one on our ship,
it'll spend its whole life underwater, unseen,
and that from the moment it starts working,
it'll be under constant and vicious attack
from a deadly force called cavitation.
When a propeller turns in water,
it generates millions of tiny bubbles on the surface of the propeller blade.
The bubbles only last for a few milliseconds
before they rapidly implode,
sucking in water at phenomenal speed
and sending it out as supersonic microjets.
They're tiny, but because there are millions of them,
this constant bombardment creates enough force
to damage the surface of the metal,
eventually eroding the blade and destroying the propeller.
