QUICK EASY & CHEAP | Repair Your Toilet | Toilet Won't Stop Running | Mansfield Toilet Repair

TightWadDIY
899 followers
1.1K Video Views·Oct 5, 2023
Please SUBSCRIBE and hit that THUMBS UP button. It really helps grow our community.
Click this link to access my Amazon Storefront and other socials! https://linktr.ee/tightwaddiy
CLICK THIS LINK:
Here you will find a link to some of my favorite things in my Amazon Storefront, a link to buy TShirts, and links to all of my other socials. https://linktr.ee/tightwaddiy
*My description includes referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support!*
Music: The Right Direction by Shane Ivers - https://www.silvermansound.com
Welcome back guys, this is the Tightwad. Our toilet will not stop running. I'm going to
show you how easy it is to fix it. First step, as always, is to cut off the water.
Next step is to remove the top and now you'll be able to see what kind of system your toilet
has. This particular toilet is called a Mansfield toilet, so you have your fill valve here,
your float here, and then this is the part that fills with water and tells the toilet
when to stop filling. There's a seal on the bottom of this tube that goes bad, so we're
going to unscrew this top piece. I'm going to lift up on this tube and get it off of
the flush valve and this just lifts straight out. This is the seal, it's just a little
rubber ring. Several companies make replacement parts for these. This one's from Korky. I'll
make sure I put an Amazon link in my link tree. I'm going to do my best to show you
where this goes, but just below this top ring, there's a little ridge right before the threads
start on the bottom piece. So it goes right under this top edge and sits in a groove there.
We're going to take the new piece and then I'm going to work it into that top ring. Once
it's in place, it'll be sitting flat and I like to give it a little spin to make sure
it's seated perfectly all the way around. Now all that's left is the reassembly. So
we're going to put this tube back on here. Make sure this goes into that hole in the
tube. Now we're going to screw this back on the top and cut our water back on. Now it's
going to fill the tank with water and we'll test the flush just to make sure it's fixed.
The tank is full. You should be able to flush it easily. We're going to call this project
finished. If you enjoyed this video, you're going to love the rest and you can get started
by clicking that one at the top of the screen. I would also be honored if you would subscribe
to my channel by clicking the button at the bottom.
