Original 11th century Slavic Shield part 2

Shield of Antiquity
8 followers
14 Video Views·Mar 23, 2026
AI Generated·May contain errors
Also first of all regarding the material itself Here we can see a fibrous material
running parallel to the edge of the shield partially appearing here as well
a little stem sticking out That could actually be good grass as is the case here
also described And on the binding material you can now see on the
side facing us that the strips emerging from the holes are all
proceed slightly counterclockwise By clockwise you now mean in
Extension to the sign center Yes exactly And then also partially here like this
continue in rows of broken binder material The strips
on the other side which you can see here for example run precisely
Opposite These are the stripes that are likely located on the underside
The ones we would see from the front side Exactly those therefore
run in the opposite direction I therefore assume that this
The binding material was threaded through here then woven
back and forth pulled again through a hole from below and thus
Keep going It looks like at least one hole has always been
skipped At least one hole If I look at this closely right now then
look at the spot you mentioned if I extend this here now all the way to
I'll go to the edge and then come back and that will bring me to the third hole
Then those two holes would be skipped
That means if I weave back and forth around here like this I'd have to do it in a zigzag pattern around
Do it three times Right Yes exactly And what one might possibly still need to
What can be observed at this point is that there are always
routes at a similar distance from the wooden edge which turn back inward
It appears here once It appears here From the other side it's
even better visible So here you have this flipped-over piece
Wait a second Just keep the pen still for a moment then I'll know where it is
Exactly The next one might be here Here This is unmistakable
That means possibly here on a width of approximately three
Centimeters from the edge the position had been secured separately so that
not every connection actually extends all the way to the outside but some
Bonding going even partially into the material
That could of course be good that an additional
Binding the innermost bundle of grass to the wooden board as if to say that this
was done precisely because after all it is here that the structural integrity lies
Weakness lies in the transition between the wooden edge
and the plant material which we assume so one could say
ot knowing for sure without actually trying it out a spot
where you join the two materials together—that's a potential
Weakness and there it would certainly make sense that one mig
It's doubled up right there Exactly Maybe also check the rivets
The rivet heads extend beyond the wood on this side and indeed
This distance from here to there remains relatively uniform
Here we have approximately one or one and a half millimeters of gap between
Nietkopf and Brett Back here we have nearly five But we must also mention that
the board is slightly wavy and warped at this point That doesn't necessarily mea
originally which can later be altered through compression shrinkage or swelling
ave occurred The displacement of the rivet Yes the rivets can also be
pushed through I also find it worth noting that in fact no nail
They're all slightly crooked Yes what exactly
can also be secondary which I suppose is reasonable So I'd say
s suggests it was originally once accurately riveted and is now
e shift has occurred precisely due to decay corrosion and pressure
during underground storage We can't see the opposite side bu
The reddish-brown spots we see here are according to the
Conservator and restorer Stefan Prater's products against corrosion that has arise
as the iron washers on the opposite side over which this bronze
They cannot become they cannot be corroded But this is a corrosion product
That's iron and that's corrosion Yes so this orange-colored part here
isn't some kind of added color but rather the actual material itself
Just rust that got through the relatively thin wood
By bronze do you mean a copper alloy I mean a copper alloy
Ingo is now going to explain to us exactly why professionals in materials science
don't particularly care for the term bronze and also aren't fond of the term brass
ruly in conjunction with archaeological findings It is found in
In archaeological publications anything that turns green from rust is happily referred to as bronze
Bronze is actually an alloy of copper and tin and in most
cases during the Middle Ages it was not that but rather
ypically brass or red rust which is an alloy of copper and zinc
That's why I'd prefer we just call the whole thing copper alloy
Do you agree Yes that's a very simple term—copper alloy—I just skipped it
We have now found another structure but unfortunately we cannot determine whether
it is original or if it resulted from mountain formation and preservation processes
Otherwise formed Here we have an arc that is shaped like this
slightly pressed into or incised into the surface of the wood
Yes I think "inset" is a very good term for that that's where
we unfortunately cannot say whether this is an original structure or
whether it formed at a later date So it is purely geometrically as well
ot just any position on the alleged sign where one might say
Ah it was somewhere in the center or nearby but it's
just located a bit opposite those three little streets
Yes I'll show it again
Ready Especially when you look at this reconstruction you've done right now
Exactly on the left you can see a relief from Gare de Moisson in France That is
Of course a completely different region but roughly contemporary if I
recall correctly with the find of the sign here from the castle in Lenzen
And Roland simply mounted the arm with the shield clamps onto the
Lenzner shield at the appropriate scale according to the presumed shape
On the alleged form And you can see it's unfortunately mirrored now but this
Three rivets are located roughly where the shield fastener actually is on the
In the French depiction the shield fastener would be located
roughly in the area where the shield is now broken off However
Interestingly that's exactly the area
Ah okay I see exactly And it's mirrored because on paper we naturally have the
Look at the inside and here is what we see from the sign here the
The alleged outer side is Exactly Yes so that's quite interesting
This is simply just a more or less random representation of a
droplet-shaped shield from that era What's interesting is seeing
here that besides the handles we also have this strap over there
above This is also frequently seen on the Bayeux Tapestry so on
e embroidery of the Bayeux Tapestry Whether by chance or precise depiction
The belts are not symmetrically attached to the shield And if we just keep it like this
ransferred right onto this shield here then it would fit perfectly as well and
would also secure an additional strap that might have been
fastened with rivets of exactly this type lying outside the
located in the received area of the sign And just as interestingly
likewise the attachment the lower attachment of the belt would also
outside the received area So it's quite possible that this
is a sign here Maybe you could show that one picture again w
In this trio losers Exactly so you can just hold it slightly off
So Niete the trios are actually quite common in contemporary
depictions For instance here on this representation
German depiction of a Kite Shield—there we have a group of three that's just how it is
von Nieten And then here an axial view around 1000 1050
Once again a David takes down a Goliath Incidentally interestingly
If you don't use it he'll just keep getting shot dead and then decapitated
Well whatever In any case you can clearly see these trios right
here Otherwise we can't really spot them on wooden objects
outside of shield contexts right So at least not no
Alright good I think that's everything for now right I'd say
