My FIRST TIME Carving a DRAGON 🐉

Wood carving: Tips and Tools
229 followers
51 Video Views·Apr 10, 2026
Hey guys! Welcome back for another carving video. So, I've been into wall hangers. This is some of
the stuff I created over the past week or two, but today's a big day. We're finally starting it.
Today, we're carving a dragon. If you've been following me for a while, you might have picked
up on the fact that I've been pretty eager to carve a dragon, and a commission for one just
hasn't come in yet. So today, we're just gonna carve one. We are carving today's project out of
a two and a half inch thick kiln dried eastern white pine slab. I want this dragon to look like
it is popping out of the frame. So that's the goal. Now we just have to achieve it.
A cocoa break. Good for the soul. Plus a little marshmallows. Those are the best.
Okay, so do you remember how I said I want this dragon to look like he's like popping out of the
frame? You can see we already have that started. His neck comes into the frame like he's coming
out of the frame. Now that we have the basic shape cut out, we're gonna go ahead and start putting in
a bunch of like micro layers to really make this guy look 3D and not 2D like he looks now.
He's gonna have this really cool hand reaching around from outside of the frame, grabbing onto
the frame. He doesn't look that happy. We're gonna make him look like a pretty cool angry dragon.
So lots of layers here. This is definitely going to be one of the more complicated
wall hangers I have attempted. So looking forward to the challenge. Let's get to it.
One of the cool things about carving dragons is there's not really a wrong way to carve a dragon,
right? Like there's a wrong way to carve a bear, there's a wrong way to carve a deer,
but a dragon is like a mythical creature, right? So we can carve this however we want.
This dragon specifically is like a western style dragon. I'm giving him a lot of spikes,
some cool fins off the back, pretty much just anything that seems dragon-y I'm adding to this
dragon. You got those front fangs that are almost snake-like. Just a lot of freedom with this piece,
it's always fun when you have freedom with your art, right? So we're gonna keep chipping away
and just keep putting those layers in like I had mentioned, and then we'll be able to detail
all those layers we pop in. The tough part about chainsaw carving in general, but especially these
wall hangers, is you're drawing these reference lines just to immediately get rid of them.
So sometimes I can still visualize them slightly without them there, but oftentimes I have to just
take a quick break and re-add them.
So we are about to tackle what is most likely going to be the most difficult part of this
whole carving, and that is the mouth. Trying to make this look 3D with two layers of teeth,
because you have the foreground teeth and the background teeth, they have to line up right.
Kind of like when you're, you know, drawing a 3D square, right? Like, things have to line up
right. So this is where the front tooth is, this is where that back tooth would be. I also want to
get a tongue in there, that's what this is. So we're just gonna slowly work through this confusing
mess and try to make this look good.
And my prediction was spot on. The mouth was easily the most challenging part of this entire
carving, because at this point I'm really only working with about an inch of material in the
foreground, and I'm trying to make that inch of material look three-dimensional, which like in
itself is a challenge. And you just have a lot going on in a very small area, you know, we got
the teeth, we got, well, we got two layers of teeth, we got gums, we got a tongue, we just have
a lot going on. But it's starting, it's starting to look good. I'm starting to see it, guys.
Okay, let's step away from our dragon for just a minute and go on a short little side quest to see
some other projects that I have been working on. So we have this horse, which I think turned out
really cute. I have since painted this and it came out awesome. Moose is definitely a staple,
I plan to make more of these, as well as more deer, and just some various other projects that
I have been working on. Almost all of these have been finished and actually shipped to their new
homes, so if you want to see some of these pieces all finished up, jump onto my Facebook page,
TM Custom Carvings. I'm really active on Facebook, so give me a follow there. But let's get warmed
up and back to our dragon. As you can see, we have some light snowfall, but we are jumping back
into this project. Look how epic this is looking. My phone got too cold yesterday and stopped
recording, so unfortunately you guys didn't catch too much of this, but we have that hand reaching
around. It's pretty cold today, but I think we're gonna be able to finish this in time before my
phone starts acting up again. So we're gonna bury this eye a little bit, because they tend to have
sunken in eyes, at least the dragon references that I've been looking at. This original bump
that I created was just to set the placement for the eye. I'm gonna remove that now,
and then we're gonna put the eye further back, that way it has the sunken in appearance.
This is a Cutzall tapered bit. It's one of my absolute favorites, and it's been my go-to for
the last three years. So we're finally at that stage. We're gonna torch this guy, and I feel like
that texture is gonna really pop. Well guys, thanks so much for tuning in to today's video.
It's pretty cool, right? I definitely want to do more dragons. I'm super into fantasy and stuff
like that. I just think it's so cool to be able to step outside of the realm of reality,
you know what I mean? And have a little bit more play in colors and anatomy and stuff like that.
So this was a really fun challenge for me. So reach out if you want a dragon wall hanger,
phoenix wall hanger, you know, mythical creatures. I'm into that stuff. So yeah, hit me up if you're
interested in something like this. So this guy, he's claimed he's going to a previous customer,
which I'm super excited about. But yeah, I hope you enjoyed today's video, and I'll catch you
guys in the next one. Bye!
