Making a WOODEN Airplane Propeller!

Airlines in the World
86 followers
4 Video Views·Oct 27, 2026
AI Generated·May contain errors
Last summer I flew out to Rolla,
Missouri to finally film a video with one of my woodworking
aviation heroes, Culver Props,
and Elena is the third generation in her family making
airworthy wooden propellers.
If you please, you may come to the seat where
your seatbelt is currently fastened around you.
It's always so fun.
One of my favorite parts of this job
is like I see people building stuff on the internet
and then I get to see their space for real.
When did you take over?
So grandpa died in 2016.
And then my dad and my husband helped me for another two years
and then they took jobs in
concrete industry and that's when it was just me, granny, kids.
I mean they were little littler back
then but we made it work. Do they help?
Sometimes like they'll vacuum for me or they will glue for
me things like that but as far as let me sand not really not yet.
They do sand little miniature props for their teachers though.
I'm surprised at how many people have nothing to do with aviation
but want a propeller.
Okay so this is all the information
we got from the owner of the Pete and
Pole that we're gonna fly this prop on and then
this is Elena's magical translation.
This speed chart is for pitches that are for my profiles.
So when you see a prop and it's stamped say
72 by 40, 76 by something. The first number is the diameter.
And then the second number is going
to be your pitch. The pitch means it's 42, let's say inches of pitch.
And what that's going to mean
is for every single rotation that that propeller makes,
his airplane is going to move 42 inches
forward, assuming no slip.
Um, pitch and poles have a little bit of drag. So we
Can assume that he's not going to get exactly
that distance, that 42 inches,
because there will be some drags. So you will hear people talk about
Angles of the blade and angle of the blade is what you use
to get inches of pitch but an angle of the blade and
Pitch are not the same thing.
So what we're gonna look here is we're gonna look at this
25 this is what I call my speed chart the customer at
We're at 23.
2350 so that's gonna be this line.
So for his max numbers and he said he read lines at like
93
So we're gonna be in this area too.
And it puts us pretty much in the same pitch area.
Before we start really getting
into it,
a quick word from the sponsor of today's video.
As you guys already know,
I am always doing something all of the time,
from building a actual propeller and flying it,
to launching rockets,
or just exploring the great outdoors
on weekends with my friends.
So I needed a pair of shoes
that could keep up with me rain or shine,
and that's why I'm excited to talk about
today's sponsor, Vessi.
What makes Vessi awesome is that their shoes
are made for all day wearing with four-way stretch
material and DymaTex technology,
which make the shoes a hundred percent waterproof. So it doesn't
matter if I'm hiking or taking my boat out or going to the beach,
my feet are dry and cozy.
Wearing Vessi's allows me to be my absolutely whimsical self
and I don't have to worry about
what the weather is like before I step outside and enjoy nature.
We all need some time outside and
what better way to do that than putting on your shoes
and just stepping out the front door.
It's great because if they get muddy,
they just rinse off and I'm good to go back out.
Now that I have Vessi shoes, I welcome the weather.
Take advantage of Vessi's Memorial Day sale
and save up to 30% on a variety of Vessi styles
by going to vessi.com slash xylifoxalin.
In case you missed the sale,
you can still enjoy a 15% discount
by using the code xylifoxalin at checkout.
Don't wait too long to grab your favorite Vessi shoes.
Now, let's build this propeller.
What I'm looking for is any imperfections.
I'm looking for any splits, any knots, any cracks.
Once the boards
were planed, I dug
out the template
for this style
of prop and we got
to tracing.
Now, the templates get nailed down to pin them
in place, and then those nail holes will
serve as guides later for alignment dowels.
So I did the first three and now Elena is going to truly flex
and you'll see how easy she makes it look.
And if you want to see true bandsaw artistry, give Culver Props
a follow on Instagram or YouTube or something
because Elena is a wizard on the bandsaw
with 12-foot boards like I have truly never seen before.
Perfection.
That was also so fast.
You did that in like two
and a half minutes flat.
Like 17 years of work.
You can compare this one is Elena's and these ones are mine.
You can't see the line on hers.
I'm sorry.
I'm sorry.
So we're going to use this hole to pin all
of these together so that way all of our centers
will be aligned and then after we have it pinned
in the center we'll clamp the ends and then we'll
put a dowel rod through them to secure them through
the end because it gets cut off.
To prep for gluing we gave each contact surface a quick sand
and then we got to mixing up the glue.
Now this glue is a pre-catalyzed powdered urea resin
so it needs to be reconstituted
with water before each use
but then after that it just rolls on like normal glue.
There we are.
So we'll glue this
side, this side,
flip it over like
a sandwich,
this side, this side,
flip it over like a sandwich.
And thus began gluing with some of the best trained help around.
I'm going to make a cake.
I'm going to let you sit your side down first
so I don't smash your fingers.
That's day one.
After a night in the press,
it's time to pull the blank out
and start making it
propeller-shaped.
Okay, so we need to sand this smooth
because when we lay it on the drill press,
we don't want any kind of wiggle.
If we have any kind of wiggle here
and our drill bit doesn't go in completely,
perfectly straight, then our bolt pattern
will be wonkity as well.
Wonkity is the word.
This flat side is the side that goes to the engine.
This is the side you're going to bolt
to your engine so we are going to drill it this side up.
And what I'm going to do is I'm going to
align the very very tip of this with the holes that we drilled earlier.
It's now time to drill
out the bolt pattern so the propeller can
actually get bolted to the engine itself.
Little propeller
loft. Okay.
This is a woman
in her natural
habitat. So
I probably have like 300 patterns total.
I organize them by hub thickness first, then diameter,
then right or left hand rotation, and then by pitch.
So I have a little bit of organization,
but I don't really have as much room as I need.
But anyway, so for the prop that we're making today,
I looked at it and we need a 72s
and then I'm looking for the correct rotation,
which is right hand rotation,
a pitch that is close to what we're looking for,
and then I'm also looking for a pattern that I like.
One of the advantages of having a girl make your prop,
like I want it to all look good together,
so I usually, I like seeing the airplane
before I make the props.
Pete and Paul is a classic design
and I do like a scimitar profile for it.
So, that made me decide
that I like this one.
So, we'll go chuck it up in the lathe.
We will just put it all in the lathe now.
It's so fun to see this lathe in person.
I've been like ogling it for years.
You just have to listen to the machine.
Does anything sound ugly?
Does anything sound off?
Does anything sound like it wants to fly apart?
Or is anything growly?
Abby, what do you think?
Anything sound ugly?
Abby approved.
So what I'm making sure of here is that the center of this,
when it rotates, is in the center of the stroke here.
That is going to clamp our carriage to this chain
that's gonna pull it down as it rotates.
So this is gonna rotate it, and then this chain is gonna pull it down.
And so
essentially,
we're
just gonna
corkscrew all
the material
that is not a
propeller off.
And with one side shaped, we left the template exactly
as it is in the lathe, and then flipped
the propeller
around,
guaranteeing
that the two
sides will
be identical.
So James made this little stair stepper for me, and like...
About one to two of these equals about one inch of pitch
so we need to go in about four so I'm
going to put it
right about there.
Okay let's see what
that does.
So if you take
a look you can see
that it cleaned really well all
the way across so 12.5 tangent
times pi times 54 which is the
The double of 27, which would give us 37.6,
and we're looking for 38.
So we
are
gonna
call
that
good.
Okay, so basically you'll just lay this on here
and like we said, 36, I make a mark at 36,
then I put
this on here
and draw the
half circle.
So we have our SAE one bolt pattern,
which is what our customer said he had,
which is four and three eighths on the spread,
which is here, and then we have three eighths bolts
and that's what these are.
I tape over the other ones, otherwise I'll get distracted.
So the bolt pattern is lined up
so that the laser runs through the center of the tip, center of the
bolt,
center of this bolt,
center of that bolt,
and then the center
of that. Okay so
This is a prop flange and this is your bolt pattern
and these are um when you ask for your
counter bores this is the diameter that I'm asking
for so you have your prop bolt that goes in here
but this is your counter bore your drive lugs there's lots
of different names for them but
basically we need to recess the prop for those to sit in there
and they're just extra centering
pins is all they are.
So you put the heavy blade
to the top and then take
your pencil down there
You marked your heaviest side with an X.
Now flip it around and do your sides again.
Okay, that's it.
Then you sand on it and then you do this again
and then you sand on it and then you do it again
and then you do it until you decide I've got it
and it's a miracle or I hate this thing.
I'm definitely gonna cut in half and put in the fireplace.
And once the bolt pattern is done,
the last step is balancing the prop, and this is the most
important and time-consuming part of prop making.
It determines whether or not the prop is airworthy,
like it has to be perfectly balanced horizontally
and vertically in order to fly. This balancing
act involves sanding both the hub and the blades,
so the hub affects the vertical balance more
and then the blades
will affect the
horizontal balance.
Now I just need
to take way more off of
it. Do you think
this is it?
I think that's it.
There we go.
This is culver
props approved.
Approved.
Now we made a bunch of wind and we messed it up, but yeah.
It's legit!
Woo-hoo!
I think my face is right here.
Right?
We're about to turn, we're like hiding behind the front.
I'm so sorry!
I need help!
We made a prop!
Serial number?
And to sign it off,
we stamped on a serial
number and the prop specs.
72
by
38.
And just like that,
it was time for me to head back to Southern California
where I was gonna put this prop on a friend's petanque pole
and finally give it a test flight.
We are at Fox Airfield in Lancaster,
California and we're going to test this propeller.
Alright,
let's do this!
So yeah, Dad and I built it. First flight March of 72.
My daughter helped me rebuild it back in 2000.
Both of the daughters helped, the younger one mostly.
How long did it take you and your dad to initially build it?
Two years and three months.
And it's all scratch built. There's some plans.
It's a gorgeous little airplane.
Thank you.
Want to see this prop I made you? Be a surprise.
That's pretty.
Beautiful job.
What kind of wood do you use?
This is maple.
Maple?
Yeah.
I never want to insert myself in someone else's airplane, I feel like.
No, you're welcome to.
It's not going to hurt you.
You can't hurt it.
I was really bummed because mine is certified, so.
Yeah,
working on airplanes
made me hyper-conscious
of cross-threading.
Yeah.
So just
feed it
through
here.
This side needs to come around this side.
Yep.
So the basic premise
of safety wire is not only
to keep the bolts in,
but also each of
these is tugging them.
tighter so like as things move they're
not gonna back out if anything they're
gonna get a little bit tighter and that's so it's kind of an art form
there's not much to preflight
on this basically check the oil and the gas
