Making a Saxon Shield for Reenactment

Shielded Dynasty Network
2 followers
28 Video Views·Oct 27, 2026
AI Generated·May contain errors
Hi there guys, my name is Zach and welcome to my channel.
Today I'm going to be talking about
the differences between living history and reenactment
and I'm going to be showing you how to make
an Anglo-Saxon shield while I do that.
Now the first step of any project is of course to research it
but that doesn't make very interesting
videoing so I've started at the point
Like I said, the research is a really important part
where I'm cutting things out on a bandsaw.
and something that I found that surprised me
was that Saxon shields and indeed Viking shields could be quite small.
A lot of the art that we see
shows them very small.
Now this is possibly so that the artist can show the person carrying it
more easily but it's also borne out by some
of the finds with some of the possible shield sizes
being around 30 centimeters
Although most of them seem to be between 60
and 90 centimeters in diameter.
Another interesting thing is that the thickness
of the shield is actually only around nine
millimeters at its thickest point
and this is borne out by a lot of finds and then it tapers
down very quickly on the edge to around five millimeters.
So I tried to do that on a belt sander.
It was reasonably successful, although it might have been easier if I'd
have gone for something more correct as far as the wood is concerned.
Now, as you can see, I've been using some plywood and original Saxon
shields were actually made out of planks that were glued together.
We do have evidence of plywood from other periods,
obviously not this kind of plywood that you buy from B&Q.
Thank you.
But,
um,
But the Saxon and Viking shields that we have seem
to be made from things like pine and fir
and also some examples made out of oak.
Here you can see I've cut out the hole in the middle
and now I'm trimming it
and trying to make it a little bit rounder so it doesn't
There isn't...
interfere with my wrist too much.
An issue that I had here is that I used quite a small hole there,
it's only 10 centimeters wide,
which is correct for some originals, but my hand does kind of...
I feel like it's a bit too big for
it. It might be a skill issue, we'll have to see.
So having softened all the edges,
sanded it all down, now I'm getting some linen to cover it with. Now
Again, in other periods,
we have examples of shields that have linen coverings or other
fabric coverings.
We don't really seem to have this for the Saxon period,
which is a bit of a shame.
There are possibilities of it,
but for the most part, it is leather and rawhide.
When I make my next shield,
I'm going to be trying out a leather covering on it.
This was my first one so I was using things that I had lying about.
It is something that will look the part
but not be exactly what we have evidence for.
I'm also using modern glues. This is PVA or wood glue.
I made sure that I soaked the linen first
so that it really wicks the glue up
and gets a good strong adhesion and really try and flatten
it down, flatten out any of the air bubbles and things like that.
The edge doesn't need to be
Completely exact.
because I am going to be covering that later,
but the smoother you get the face at this point,
the better it will all be. This part was super satisfying.
So after having left it to dry, the
fabric was now quite crispy.
It had soaked up the wood glue and so slicing it off with a very sharp knife
Obviously very carefully was the next step there
and I was trying to get it as close
to the edge as possible and then of course I
also had to slice out the central hole.
As you can see this was a bit of a trialing things out
and so I had already done
the one side before going on and doing this side that I was videoing.
Thank you, Eric.
With that one I had folded the linen over
so that there would be an overlap which meant that this
side did not need an overlap it just needed to glue down
and cut as close to the edge of the
hole as possible and then have a little bit of trimming
and a little bit of sanding just to
make sure that there weren't any sharp little bits
of solid fabric that would interfere with my hand.
Having done that, it's now time to paint the shield.
Now it's hard to say exactly what colours
they would have used. Again, I'm using modern materials here.
This is not a replica shield,
this is a shield for fighting with and a first test piece.
So I'm using acrylic paints which
Which are the easiest to get hold of and I'm doing a nice simple
A design that was found online.
This is just using some masking tape to get it as
straight as possible and then painting that on.
The edge wasn't brilliant, it did bleed quite a bit
if I had more time.
I was more patient I should say than I would have waited
and tried to get a
better finish on that. Then just doing a second layer
because white does not cover red very well
Bit more patient there as you can see,
so using an original design I think is really important
for shields like this that aren't actually completely accurate.
If you're going to be
on a battlefield, on a reenactment battlefield,
you know 20 feet away from the crowd line,
it doesn't really so much matter what the shield is made of,
but if you can have a design that
Has come directly out of a manuscript.
Then you're looking the part even
if the shield itself is not completely accurate.
Now I'm making the handle.
In the interests of doing this as a really accessible,
really cheap way of doing this, I'm using some scrap wood,
again using original measurements,
but modern tools in order to trim it down,
you know, not whittling it or anything like that.
Some of the originals have got some really
lovely designs whittled into the handles
Thank
and that may be something that I'll
do on a later shield but for this one
it's keeping it simple and just making it usable
so obviously sanding it down afterwards
to get a nice finish that I can hold
on to and won't hurt the hand is important.
you.
Adding some glue now,
again just some simple wood glue and some clamps to hold it down,
but this is not the only way that I'm going to hold it down,
it'll also have nails as well.
Some of the originals actually had metal handles and by 1066 we see
We see...
the kite shields have leather straps,
but this one is an earlier design, a simple design.
with um with a wooden handle with no metal uh additions here
the nails are going in and then
i'm hammering them down
and um kind of turning them into staples uh this is a way of stopping
them from coming out back out the other side
um and it's really satisfying actually when they uh
when they go over like this and when they sink in these are just
um standard i think they're called rose-headed nails
that i got from an online supplier
So they're really accessible
and then we're going to do exactly the same with the boss.
Of course.
There are lots of places online you can get bosses like this.
This was one that I got from a Celtic
web merchant and they're a European company
but you can get these all over the internet.
For my next shield I've actually already got the boss for that ready
and I got that from
I got that from a friend of mine who...
who made it specially for me
so if you are interested in seeing a more accurate shield
with a hand forged boss then hit that subscribe button.
Again we're turning these over and
hammering them down. Something that I think is quite important
when reenacting is being honest
with the audience and if you do have a shield like
this that maybe is less accurate than it could be
Talking to the audience about it,
I've always found that they've been very understanding of
that sort of thing.
So saying things like, you know, this is covered in linen, which is a
possibility, but we don't have evidence for that.
And talking about things like that can help them
to understand the nuances of the period.
Now I'm adding the edge to the shield.
In this case I've decided to sew a leather edging
on and so I've marked out at inch intervals little holes
that I'm drilling with a pillar drill there and then I'm going
to cut out, I think these ended up being four centimetres wide,
four centimetre wide strips which I'm
then going to soak and sew all the way around the edge.
This is a part that I was quite nervous about, so I
did almost all of it before I actually started filming any
of this. So there we go,
the leather going in. It's only about one millimetre thick.
These shields really were
um
quite thin, quite light compared to what we might imagine,
and I think that
That, um,
you
I'll be doing some videos about that in the future,
very
looking at why it might be that
these shields are so lightweight compared to many re-enactment shields.
much.
Now doing a shield
like this is actually, I think, quite useful.
Having a shield that you know is the right
measurement, the right size,
and reasonably accurate as far as weight is concerned.
I think is really important.
Having a thicker and larger shield than necessary can actually
give people a much worse idea of what shields are like,
even if the materials themselves are better.
So having a shield of
heavier, larger, heavier, thicker size,
even if it were made out of the correct materials,
can give people the wrong idea
as they might end up holding it and thinking,
oh, cool, this is heavy, and they weren't.
So there we go, here is the finished article.
Now some might think that this is a bit smaller
than they were expecting. As I said in the main video
this is actually a perfectly legitimate size
based on a lot of the artworks
and the finds that we have from the late Saxon
period. It is still likely that a lot of shields were bigger than this.
But we do have evidence for shields of this size,
like I said, in artwork and in finds.
This shield itself is... it looks the part,
it does the job, but this is not what I would call
a living history shield. As you saw in the making of video...
The materials that went into this were not very authentic.
The boss itself is probably a little bit too large.
The wood, although it's the right size,
and there are some examples of hardwood shields
being used in the Saxon period,
this is plywood and we don't have evidence of that for this period
The Romans did use some kind of pieced-together shields similar
to modern plywood, but they didn't use that and there is very little
to no evidence of fabric covering on shields from this period but
As far as using something like this to practice your fighting
or to fight in a
reenactment battle, something like this would work perfectly well.
Obviously for reenactment battles we tend
to make concessions to safety and things like that.
We can also make concessions to price.
This sort of thing is a lot cheaper than piecing it together
with slow grown pine or fir. It is a lot easier to do.
It's something that you can do yourself.
You don't need to track down hide glue and things like that.
So this is definitely something
That would make a reenactment battle accessible to more people.
This kind of shield is not actually what we see on the Bayeux Tapestry.
All of the round shields that we see on the Bayeux Tapestry
tend to actually be domed or conical.
Now the Bayeux Tapestry is obviously not a photograph
so we can't say for sure.
But it does seem to me
that the images on it are showing conical shields wherever there
are round shields and there are
very few round shields as well.
They're only in the Saxon army, they tend to be conical or convex
much like the Frankish shields that we see in Art
of the Period as well. So a shield like this
is not the most typical of what we would expect
on the battlefield of Hastings in 1066.
So this is, despite all of the work,
this is not going to be part of my 1066 kit.
It will be useful for when I'm talking about
when I'm practicing earlier periods.
At the moment I'm going to be using this to get my
shoulder in working order ready to use a more accurate shield
and I will see you
See you in my next video, thank you very much, goodbye.
Thank you for watching to the end of this video.
It really does help the video as far as the algorithm is concerned.
If you enjoyed it please do give it a like
so that more people can find it,
if you're not subscribed then consider that as well.
If you want to help me in my journey to
put together a 1066 impression
and share that journey with you then you can find my Patreon
in the link down below
and join these lovely people in supporting that. At the moment all
All the money from that and from YouTube is going towards a new sword.
Which I'll be doing a video about soon.
Thank you very much and I'll see you soon. Bye-bye.
