I Tested the Most Downloaded 3D Printed Tech!

PageTech
205 followers
#tech #industrial #technology
legend says I'm still printing drawers...
Video Summary
AI GeneratedThis video evaluates the practicality of popular 3D prints, ranging from niche gadgets to high-download models. Using Bambu Lab printers, the creator tests items based on utility and design to determine how 3D printing can enhance daily life, showcasing everything from simple home organizers to complex, multi-material footwear and AI-generated models.
Today, I'm on a mission.
I want to test some of the most popular 3D prints on the internet,
from the barely discovered all the way up
to the single most downloaded of all time,
to find out what are the most useful things
that a 3D printer can actually do.
Let's begin.
Because we're starting at just over
a thousand downloads where I found something that should
fix one of my biggest gripes with Samsung's flagship phone,
a case with an anti-wobble
pin.
And we're making everything here
on printers from our sponsor, Bamboo Lab.
So here's the problem.
It is literally impossible to use this phone
on a flat surface without wanting to snap
the thing in half in anger.
So let's put the pin in here.
Case snaps on.
And...
Oh my God, it's so simple, but it's so genius.
How many engineers does Samsung have?
Seven out of 10.
Moving up to 2K downloads then,
this amplifier is supposedly the ideal way
to listen to music in the shower.
So, prop it over your glass like this.
Smartphone goes inside, shower goes on,
and if you were standing inside,
this is what it sounds like without the amplifier,
and now with it.
Well, hello.
That was actually a very decent improvement
because it keeps your phone close, it keeps your phone dry,
and it makes the sound very direct.
It almost feels like you're wearing a pair of earphones.
Only problem is you're a little bit screwed
if there's a 40-minute unskippable YouTube ad partway through.
Give it a seven.
Now, if you know me, you'll know anything
that helps me hide cables, I'm into.
Anything that helps me keep my tech charged, I'm into.
So, pretty excited about this AirPods dock,
as it is appearing to be both of those things.
So, one strip of double-sided tape on the back, and we are in business.
So, AirPods, if I slip them inside...
They're now charging thanks to the USB-C cable here.
Okay, but let's say I'm working at my desk
and I just want to pull the buds out.
Yes, that is incredibly easy.
And then if I want to take the whole case out...
God, this looks like world's most useless panic button.
Wow, what a flawless invention.
10 out of 10.
So far, so good then. And I'm assuming the more popular the prints get,
the better they should be.
So at 3000, this is the world's laziest phone stand.
So this is for all my fellow fall asleep
to a YouTube video at night clan.
Why does this feel so natural?
You know when you first look at this thing,
that 45 degree angle looks hella awkward,
but weirdly when you're watching it feels like exactly
the angle it needs to be. And then,
because it's got this super wide base
with these uneven holes for extra grip,
you should even be able to take it onto the sheet without it tipping.
All right, so I'm in bed, I can't get comfy, shuffling around.
Oh, it does what it needs to.
It's not a pretty accessory, but it is a working one.
But what if you wanted to do the old hands-free thing?
While riding a bike.
So open the Bamboo app, that takes you to Maker World,
which is kind of insane to me.
It just feels like you're browsing
this incredibly creative, wacky store.
So here's a bicycle gyro can holder,
but then instead of needing to buy, you just hit print.
Very curious to see if this one actually pulls through though,
because they have this one image of not just a can,
but an actually open cup being balanced,
which to me just feels like a fantastic way to get drenched.
Okay, go!
I'm turning, oh my god, speed bumps, harsh brakes.
Well technically it held the cup, shame about the liquid inside of it.
Give it a three.
So let's print something to hold some less spillable items,
like Polaroids or Instax photos.
And since it's a bit of a display item,
I'm going to print the base in a fancy multi-color silk finish.
So each one of your photos slides into these frames,
you secure it in place with one of these,
and then you can leaf through them.
I like the fact that you get to see
two different images at the same time.
I could see this being a nice thing to leave
in your living room for guests to just flick through,
but gotta say these frames are a little bit fiddly. Six out of ten.
While we're in the process of storing memories though,
4,000 people have downloaded this
all-in-one storage chest for your entire video game collection.
So the outer case is always the same,
but then the idea is that you print
the specific trays that you need for the games you have.
I love this locking mechanism they figured out,
very satisfying and secure.
So I've got a bunch of Game Boy Advance games on top,
I've got a tray for my Switch games below that,
and then all of my PS5 games are...
Oh.
Yeah. Now this one did need a few metal screws
as well as the print itself but
that feels well worth it. Eight out of ten.
Am I using this video as an excuse to just
fix our own day-to-day micro issues?
Yeah pretty much because I've also just found a sofa tray that
looks spot on because we have this amazing place
to put drinks if you're on the ends of the sofa
but if you're anywhere in the middle area you're kind of stranded.
So does this solve the problem?
Oh I like that. It slides in nicely
but it's clearly got enough friction to keep it in place.
This is so clever because it's angled at just the right amount
to offset the natural downward angle of the sofa
so that the drink stays flat.
I'm actually completely happy leaving this here.
Plus the fact that we printed it in a wood filament
so it even matches the aesthetic.
That's a nine.
We're past the 5k downloads mark now
and what a lot of people seem to have clocked onto
is the crazy crocodile clip.
So the idea is you've got an open bag.
This seals it. Oh, I love the snap.
Now I get why it's a crocodile.
And it's clamped down proper. You can't even get that off.
I honestly have absolutely zero notes.
The hinge even has a little bit of friction
so that it holds at whatever point you want.
It's the best bag clip I've ever used.
It's just a bonus that it's also a crocodile.
I may have slightly missed the ideal seasonal window
for this one, but I was just slightly taken aback
by the fact that you can also print a lawn sprinkler.
So snap it into your hose pipe,
stab it into the ground with the spike,
and, ah!
Oh my goodness me.
I mean, it definitely sprinkles.
Blimey, neck.
Okay, all right, calm down.
Yeah, this'll work great for my artificial grass.
This is awkward.
I've just found a product that I've
been telling friends to buy for ages for $25 a pop.
Not realizing that you can just print it
for less than a hundredth of that.
So this is the real thing.
I use it almost every single day right in front
of my mouse to reduce the wrist strain
that I get from it.
But then, this.
is what I just printed, and it feels almost exactly the same.
It doesn't quite have the
same soft touch finish.
I'd say the real one is 10% more comfortable, but then this is still
100% better than not having anything at all,
so I can't give it less than an eight. But I might
be able to do one better than that.
Instead of just a product that is exactly the same as something
you can buy, this is a clothes hanger
with an additional trick up its sleeve. Your sleeves,
sorry. Okay, so I'm in a massive hurry.
I really want to wear this hoodie, so...
I should have caught that, but wow,
I've been doing this wrong my whole life.
There's basically a bunch of gears here
that are designed to release when you squeeze these
two parts together, and that is infinitely
quicker than trying to wrangle your clothing
off the arms and inevitably stretching it
because you're doing it in such a hurry.
9.5?
We're past 10,000 downloads now.
My theory on more downloads equals better is
having mixed success, I'd say. But now we have a trash can,
which I wasn't originally going to print because,
well, a trash can is a trash can, right?
But then I realized this actually allows me
to solve a problem from when we were first
doing up the house. I had this idea
that I wanted to theme every part of each other
bedrooms and bathrooms, and I got 80% there.
But there were certain things that I just
couldn't find the right thing for,
and the bin is one of them. And this fills that gap.
And it closes by itself.
Controversially, I'm gonna say an eight.
How about the completely mechanical hand fan?
Powered using a crank mechanism.
I like the two-tone finish.
Pretty smart looking thing.
This one took a couple of screws too.
Was it worth it?
Let's see.
Ooh, that's not bad at all.
I can definitely feel the airflow.
Kinda satisfying too.
I'm feeling cranky.
It is a bit loud though.
I'll give it a seven.
I've also been wondering though,
as I've started to slowly fall down the maker world rabbit hole,
there are so many things here
that genuinely look like designer home pieces. So we should probably
print one because I want to see how close
to that they will actually turn out. So at 12k downloads
is a lamp called The Wave. This looks amazing.
Like seriously. So I did have to buy the LED
inside separately. I paid about eight pounds for it.
Get a little clicker with it over here.
I love the way that that distributes the light.
I actually have no idea how I would even improve this.
That's a 10 out of 10.
Now, something I thought was silly and funny
and actually really cool,
there's a Harry Potter bookend, which I had to try,
because we got the whole collection.
We're waiting on little man
to be old enough to understand them.
So you wrap the first book around it,
Harry himself goes here, and then, that is so cool.
It would take you like a proper 30 seconds
to figure out what's going on here.
Love it.
Now, I have low expectations, but very high hopes for this one.
Do you remember when Wilson came out with an airless basketball
and charged like two and a half thousand dollars for it?
Well, here's mine.
This is the most excited I've been in the entire video.
So, regular basketball, great bounce, obviously.
But now, 3D printed basketball.
But after
that gruelling 11
seconds of exercise,
I feel like I could do with a sit down.
So, I'm printing a chair.
No, literally, this is a portable chair that you can take anywhere.
So you carry it around like a briefcase
or stick some straps in the side and use it like a sling
and then these are all my pieces.
Moment of truth, nice chair.
Me personally, I'd probably just look for a bench
but it's not a bad backup to have for a last minute picnic or barbecue.
Six out of ten.
However, I can actually level this up a little.
Because there's Bamboo Labs' more accessible printers like the A1
and the higher-end stuff like the H2 series,
but that is their just-announced top-of-the-line X1C.
The filament storage is now built right
in instead of sitting in a separate box.
And more importantly, because this thing has nine tool heads
with the filaments already loaded, preheated, and ready to print,
it can switch between different colors and even different materials
in six seconds versus 40 at a minimum before.
So now I'm printing a bay card
which might just be the cheat code to unlimited happiness.
So everything's printed in one go together in this frame
and I guess you just pop the pieces out.
Oh my god this is so satisfying and this thing is so cute
and this has the rip cord and the launcher
all baked in as part of the package.
I did have to add my own metal bearing here but that was
That was very cheap.
Now we just need a baseball stadium.
Three, two, one, let's do it!
Okay, well...
They don't spin as long as the real thing.
That's still awesome.
All things considered, I'm going to say 8 out of 10.
And I guess while we're in the process
of frying the mind of my not-so-inner child,
at 35k downloads, you can apparently print
the Ocarina of Time from Zelda.
You know, the thing that Link plays to control time,
summon storms, oh, and teleport.
This is that.
I specifically picked a metallic finish
to better match the shine of the real Ocarina.
And it should be playable.
Um, I'm not sure I could call
that the most sonically pleasing musical instrument I've ever played.
And I'm definitely still here,
maybe because there was no Triforce symbol on it like the real...
That was odd.
Now, you might remember that time
where I made that video backing
a ton of Kickstarter products.
And literally, my favorite thing of the lot
was this pair of 3D printed sliders.
So, found a print for them,
as did 50,000 other people, I guess.
And go.
And the reason this is particularly exciting now
is because the H3C can, by default,
print in a new, softer TPU
that's specifically certified for skin contact.
Uh, it actually worked.
We printed sliders.
I'm not actually sure I would say these look homemade.
Only one thing left to do, come to daddy.
Oh wow, that's a snug fit.
Okay, seems like I printed exactly the right size.
Oh, they're bouncy.
They're bouncy.
I think we've done it.
Yes, they're actually perfect.
They have just the right amount of squidge
that I was looking for.
I can't believe it.
I can't believe that's 3D printed.
What the hell?
And the other really nice thing about these
is it kind of feels like you're walking
on this really soft gel-like layer.
And then because they're so absorbent,
they're also practically silent.
Yeah, I have absolutely no idea
what I would even do to improve that.
Therefore, a 10.
And apparently these are just the Gateway shoe
because these came off the exact same printer.
So Bamboo Lab did this one just to show
that you can even make an entirely custom shoe
in full color with both TPU for soft parts
and PEBA for support in one print.
They're on the heavy side as far as trainers go.
Okay, all right Bamboo, well done. They are very, very comfortable.
And now that I've started questioning how much
stuff I've unnecessarily bought over the years,
turns out one of these Maker World mad lads has even figured out how
to make a card shuffler,
after I paid over a hundred dollars
for one in a video not very long ago.
Definitely on the more complex end,
construction-wise, but this would be very
impressive if it works.
So, pack of red cards on that side, blue cards on that side. You put
one of these 3D printed weights on either side.
All right, three, two, one, shuffle!
Oh, you don't really see much happening at the top,
but the piles are going down really quickly.
And then to retrieve your cards, whoa.
I shouldn't have done that.
So how well is it shuffled?
Ooh.
Not perfectly, but pretty well.
Can you see it's like mostly one-to-one
with a chunk of a few of the same colour
having slipped through every now and again.
So you're basically getting the result here
of a decently capable riffle shuffle,
perhaps with a little less aura.
I don't think I'd personally use this,
but I am very impressed with the mind that came up with it
because the mechanism is sick.
Let's go six.
But of everything that humanity could choose to print,
It's pretty funny that one of the most
popular things on the entire platform
is a slightly better way to squeeze toothpaste.
So you stick your toothpaste inside.
So this actually has a ratcheting mechanism
which means you can squeeze some out
but then let it go and it stays locked in place.
It's such a satisfyingly tight fit on the tube.
Oh, got some out!
I'm gonna be using the same tube of toothpaste till 2031.
Now, the other type of thing that seems to be huge
in the 3D printing world is board games,
but oftentimes with clever little ways
to make them even better than they used to be.
So, this is Connect Four, but you use spheres instead of coins.
I didn't realize it did that.
So many more style points than just dropping a coin in.
But I guess even more importantly than that,
when you're done with the game,
the ridges on these balls should force them
to each roll into their own respective halves.
So even though I think I know what's about to happen,
I still can't quite wrap my head around the fact
that it's about to happen.
All right, oh my God.
Every single one
sorted perfectly.
I'm fine, I'm more than fine.
I mean, that's not just incredibly cool engineering,
but also the loser doesn't have to do
the cleanup of shame anymore.
10 out of 10.
We've printed a ton of stuff now that's already out there.
What we haven't tried yet is printing something that I've made.
So this is MakerLab, which is a bunch of quick tools.
Things like being able to print
your own QR codes that it turns into landscapes,
or build your own bespoke lamp using a configurator,
or even, the thing that I'm mostly here for,
turn any image into a 3D model.
I'm not confident this is going to work well,
but I miss my cat Milo, so I'm going to drop a photo of him into there.
Okay, that's going to take 2.9 minutes, right?
Wow.
Oh my God.
That's actually insane how it's got rid of the background
and it's got every strand of his fur seemingly.
Wow.
Okay.
Export and then...
Print.
And because the H3C has all of these tool heads,
maybe actually the most important thing
that it can now do is mix colors as it goes.
So instead of me buying a separate filament
for every shade of Milo's fur,
it just blends them from what's already loaded.
Wow.
It's got all the bushiness of his tail
and his fur and his little face.
I miss you little guy.
And from a distance, you can't at all tell
that it's doing color mixing
to get all of these different shades.
It just looks like the colors.
The fact that it's got like the light reflection
in his eyes as well.
I'm not exactly sure how I'm meant to rate my cat,
but it feels like an eight to me.
I kind of thought at that point
that I topped out this machine.
Yeah, no.
Because when I showed Bamboo Lab what I'd been printing,
they chuckled because this is what they cooked up.
And yes, it completely articulates.
Oh, and then the entire body of this watch,
the carbon fiber based casing, the flexible TPU for the strap,
all the little details in the dial done
with a fine nozzle was made in one single print.
on an H3C. But let's get back to our download chase
because approaching 100,000 downloads,
one of the most popular prints on the planet
and yet still barely a scratch on the single
most popular print, this is Gridfinity,
a 3D printed modular storage system. So the idea is
you pick a drawer or cabinet that you want to organize
and you place down these base plates.
Okay, done.
Then you just print the exact storage containers that you need
for the specific things that you're storing.
And it's genuinely surprising just how many
things someone's made a Gridfinity tray for.
There's even trays made for like specific camera models
that have specific attachments on them.
And then these trays, I'm hoping,
thanks to this grid that you've got on the back of them,
should just snap into place.
Ooh.
So the base plate.
And then the question is,
this tray is specifically made for the Neo ruler
that we use to measure things.
Is it going to fit?
Yes, it is.
I think I'm gonna have a problem here.
Oh my goodness me.
This is art.
There is no other way to describe it, Trisha.
I think we need to do this for every room in our house.
The time has come then
for the single most downloaded 3D printing project ever,
with 415,000 downloads on MakerWorld and a lot more than that in total.
It's a boat. It doesn't hold anything.
It doesn't fix anything. It floats upside down.
This is Benchy and it's basically become
the first thing that anyone with a 3D printer makes
because it's designed to be the perfect quick benchmark
to test that everything's calibrated.
That's why it's got text on the underside, arches and overhangs,
just a whole bunch of things that only come out right
if your printer's properly dialed in.
So obviously someone's made a multicolor one to flex their H3C.
But yeah, the most popular 3D print of all time is completely useless.
And yet it's kind of mad just how much of the rest of the stuff,
the stuff I found and the stuff I made,
that I'm actually going to keep using.
Now if you'll excuse me, I've got about 40 drawers to go
and print Bambu Lab, link below.
