My kitchen drawer has been driving me insane. No dividers, everything sliding around, never quite organised no matter how many times I reset it. So I finally did something about it.
First, I built a custom timber insert using recycled floorboards from our house. It looks great, but it took me way longer than I expected.
Then I tried something completely different.
I got my hands on a the @BambuLab A1 3D printer and built a full Gridfinity setup for the second drawer. Custom fit, modular, and done in a fraction of the time.
Two drawers. Two approaches. Very different outcomes.
If you’ve ever dealt with messy drawers, this might be the easiest upgrade you can make.
Do you have a product you want us to review? 👉 SEND TO: Attn: Jonno Rodd Hunting for George Parcel Collect 10103 33142 350 Orrong Road Caulfield North 3161 Victoria, Australia
We've had a major problem in our kitchen since we finished it and it's not the mess. It is this
drawer. It does my head in. It's done my head in since we finished it. So today we're gonna fix it.
I did come up with a solution to solve this as soon as the kitchen was finished but you know
how these things go. I started working on other things. I actually did start fixing it but I never
finished it. So today we're gonna solve this problem once and for all. These drawers are all
custom built right. We designed them to be the right spacing for the right size of this room.
It's an insert with individual inserts that do fit but it doesn't fit the drawer and then we've got
sharp knives. Look at that just sitting there. I've actually got a serrated knife with its nose pointing
up. We've got all sorts of junk and bits and pieces, can openers. Look there's another knife
just floating around in this drawer and then it also gets really filthy because this thing slides
around and junk just goes everywhere. What I'm thinking is I'm gonna have to make some sort of
custom insert that perfectly fits the width and length and the depth of this drawer because we've
also got a little hidden number in there as well. Another problem. So first I'm gonna measure this up.
While we're here we should probably work out if there's anything we can do up here as well but
that might be a problem for another day. It's not that handy at the moment because it's just a mess
and you still can't. Random things like crayfish pokers. More candles. Cool. I might as well measure it
up while I'm here. Let's shoot back into the shed and start working on a plan. I do have an idea about
what I'm gonna do. I've got a whole heap of those leftover floorboards. Tassie oak ones that I ripped
out of the kitchen before we rebuilt it and I always wanted to repurpose them for something
because they're excellent Tassie oak. Actually there's one over here. This is actually one of the
boards from under the cabinetry in the kitchen and it hasn't been sanded. It hasn't been stained.
Nothing's happened to it. It's got the original stampings from Tassie. We pulled them all out. I
stacked them all up. I saved them. I actually ran a heap through the thicknesser table saw. Cut the
broken tongue and grooves off and we made that topper in the kitchen as well. So I always wanted
to use more offcuts of these for a little project. What we're going to do is something like this.
I'm thinking we divide it up. We've got our total width of 630 to work with and we've got 474 deep
to work with. Well the way I use a drawer is all of the most frequently used stuff is at the front
and then your long infrequently used stuff should be at the back. So what I reckon we should do
is create some dividers so we have some long storage at the back because that's quite deep
and then run individual cutlery trays like that and make a tray out of the Tassie oak. Seal it
all up. It'll be rock solid. Make it the exact width, the exact depth. That'll give us ample storage.
That's the plan. All right I knocked a bit off every single edge. Double, triple checked them
in the drawer. It all fits. There's like a mil of tolerance which is perfect. So why don't we sand
these things, clean them up, glue up a block and then start finishing this thing. Glue's dry. Time
to work out the rest of this jigsaw puzzle. I've worked out my spacings. I've marked it along to
get my one, two, three, four, five, six, seven, eight little cubby holes and then I made a mistake
and I marked it on that but what I forgot is I've got a little horizontal divider for our big
spacings and then all of our little ones. Boom, boom, boom, boom, boom, boom. So I've gone and divided it by
seven because I've got one, two, three, four, five, six, seven spaces but I've got six divided.
All right so I've got my total internal width minus the thickness of my combined
six pieces divided by six. 87 not 74. I'm gonna get rid of the markings that are already there
and remark them out. We're back in business. Sorted it out. Gonna descend it I reckon. Get some glue on it,
pin it. I'll work out this last one after. Shouldn't take too long. I'm just gonna glue the ends.
What would have been smart is to nail this bar outside of it and then put it in and nail it
from the outside but you learn something as you go. Another blow out. Clean this glue up and then let
set off. Look at this thing. All done. How did that happen? Gave her a bit of a cleanup. Sanded it all.
Gave it a quick coat with a bit of satin clear and she's come up a treat. It looks solid. Do you know
what? I just have to sand the bottom because I sort of propped it up and had to paint all the
different surfaces and corners and bits and pieces and I've got a bit of a drip happening on the
bottom but I'll just knock that off because you'll never see it. It'll be at the bottom of the drawer
and then we probably should have test fitted it but we don't have time for that.
All right. Knocked a couple of those drips off the bottom. She's good to go. I'll take her inside
but you know what I have been playing with recently? Look at this. 3D printing. If I had had
this when I first started thinking about this, I probably would have saved myself two years and
saved myself a lot of time. This was supposed to be a wall-mounted hand holder but I didn't design
it. I just found the file online and hit print and what I've realized is now I've gone back to
check the print file and this is a 60mm hole. A standard can is like 70mm. Not gonna fit but it
will fit little skinny cans or even caulking. When I was finishing this thing up Bamboo Labs
actually reached out to me and said hey we want to send you one of these printers and test it out
and I'm like yeah I don't really have a use for it. I don't know what to do with it. I don't know
how to design in CAD. I don't know how to print things and from my research back in the day like
years ago when I was looking into these things I was kind of getting excited. I've always been
excited about techy things and new things and bits and pieces but I looked into the 3D printing thing
and it was so complicated. You had to build your own machine, service your own machine,
design bits and pieces. It just looked really complicated and really hard to make it work well.
These guys said it's easy and they sent out this machine. This is the Bamboo Lab A1. It's like an
entry model machine and it's quite cheap but you still can have multiple spools of material
connected up to it. I don't know. It's a bit beyond me. I'm just learning. The best thing is
the amount of free files and things that are online. I spent way too long finishing that
timber insert for the kitchen drawer so when that 3D printer turned up I started tinkering
and I started investigating it a bit more seriously as to what practical use I could
actually put it towards. I thought it'd be good to give a little overview on how I sort of went about
the process of learning this thing and how easy I found out it actually is. I don't know how to 3D
design. I don't know how to use CAD but there's so many models on the internet you can just download,
hit print, you can even do it straight from your phone. It's super easy so let's have a quick look.
I've been using these matte colours and I use a lot of this matte charcoal. This matte dark green
has been really cool and then this matte desert tan I kind of like as well. That's the printer
side of things. It's super easy. It pops out of the box. Really easy instructions to follow. Screw
it together. The magic in this system and buying into this particular brand of printer is this
thing called Maker World. This is a catalogue of files that users upload and then other people make
changes and do remixes and then re-upload variations on the same model that people have done
and it literally opens the file directly in their software and you just hit print. You don't even
have to mess around with settings. That easy. But what I've been doing is I've been starting to
create a little collection of my own. These are all the bits and pieces that I've saved. So here,
look at this. The vase amount for the screen. It tells you you can choose your printer. So I've got
A1. They all work for the A1. You literally just go bang. Open in Bamboo Studios. Look at that.
And then that's the file. Ready to go. It's got all of the settings ready to go. Here we go. Look
at this one. Yeah. I've got the little Mac Mini in a 3D printed enclosure on the wall as well.
Literally just hit print and then screwed it to the wall and it worked. No designing necessary.
So I actually printed one of these. Downloaded the file. Hit print. This is what came out. Doesn't
fit my cans. So I went through. The same person has uploaded a 70mm version. Look at that. Bolted
to the wall. Can storage. Paint cans. This was a good one. Tool storage. So good. There's so many
options for tool storage on these platforms. It's been hours going through it. But I found this one.
It has variations of solid little decorative cutouts. Different widths of these things for
different width tools. Print one out. See if it fits your tool. I've done a whole row of them.
I put nine of them up. If tools are hidden away you're always hunting for them. If they're
away but you can see them and they're easy to grab. So much better. This. Look at that. Starting to
get organized. At least I've got an idea of what's possible. I started playing around with different
size bins. I printed out. I'll show you how this grid system thing works. These are the little
grids that you print out. I measured the inside of my drawers and worked out how many grids. I
That's why I've got all these up. So I've got enough to do another drawer. So those things go
in the bottom and then the bins go in them. And then you can just pull them in and out. If you
ever want to change anything around. They just come in and out. And then you see the grid system
at the bottom. And they're not glued in. But they kind of just fit. There's only a couple of mil gap
front and back. So things don't move around. The biggest pet peeve I've got. When you close a
Everything shifts and flies back to the back. It doesn't happen anymore. I found that these
matte colors are kind of nice in drawers. And it's nice to have a little bit of a contrast
from the things that are going in them. This one's going to change again. I was just playing
around again with that full length sort of box. It's cut in half and there's a joint in it. But
once they're all up against each other, you don't even need to glue them together. So good when you
close a drawer and everything doesn't just move. So I showed you a couple of the drawers. That's
the first thing I started trying to tackle a solution for because I'd heard about this grid
finity system. And you can find all these files all ready to go. Or you can draw them up with like
a little generator really easily as well. But I found these they are actually I was searching for
this because I needed a certain number of grids wouldn't fit exactly in that drawer. And if I
added a half grid, I found out someone's invented a little half grid one and then boxes which have
little half grid as well. But if we just search grid finity generator, there we go. I've already
got a login. How good. So this is how I'm going to make all of the inserts for the top drawer in
the kitchen. There's plenty of videos on YouTube about grid finity, where it came from history
behind it. But it's basically an open source platform. It's based on a 42 mil square grid.
And then it has little tapers on it. So your box has a little grid system on the bottom of it.
And then your grid has bits where all your things that you make lock into. But I just made boxes. So
they're multiples of 42 mil. Each square is 42 mil by 42 mil. Say I want to go two wide,
that's six deep. And I want the height, I think the height is in seven mil. It's a bit weird,
you'll work it out. But I've done all of mine six units high. And it tells you what the actual
measurement of the overall box will be here as well. This will be 84 by 252 by 46.4 millimeters
high. And then that makes the little box. And then all you need to do is literally export it.
Downloaded the STL file, which is a 3D file. I don't know anything about 3D designing. So this
is as easy as it gets. Box draft, I didn't even name it. It opens in Bamboo Studio. And there,
look, there's your box. You can zoom around. It'll tell you the dimensions and stuff down here.
You want to see it from the top again. Hit top. There's extra tools here like you can create.
Say I wanted to go add another plate. I want to, maybe I want to copy that. Or maybe I want to
print two at a time. Might even be able to fit three at a time. Does that fit? Just. So you can
print three boxes at a time and just let it run overnight. Pick them up in the morning, they'll be
done. And then you just go hit print. Choose which color you want it to use that you've got installed
on your printer. Hit print and off she goes. There. It's only as complicated and as hard as you want to
make it. If you want to go and design something from scratch, good. Grab some calipers, measure
something up. Let's get back to solving that problem in the kitchen. How much easier would
it have been to work out a grid system for that kitchen drawer and then just to print boxes that
fit the kitchen drawer. So that's what I've done here. I never started making an insert for that
little top funny drawer in the kitchen. But what I did do is measure it at the time and I worked out
that. Oh, where is it? It was exactly one, two, three, four, five. It was 10 by 15. So if I print a five by
five and I get six of them, it's going to fill the drawer perfectly. Also have not test fit this yet.
Have just finished printing it out and have laid it all out here. How good is that?
3D printing. Who would have thought it was actually easy in 2026? But it is. We'll see how it fits in
a bit. But let's take that timber thing in, see if it works. If it doesn't, I've got a backup option
and we'll see what Lucy thinks. Hey bud, you want to see if this thing fits or what?
This thing. It's been two years in the making. What do we got in here? So much stuff.
We're going to see if it fits. I haven't even tested it yet.
Let's see if it gets in there. Time to empty this and solve this problem of everything moving.
We probably don't need things like this anymore. What is that? We don't even have takeaway around
here. We've also got sharp knives just floating around. Plenty of them.
That's a nice cheese knife.
Have you ever used that? Yeah, I'm a baker now. No, I didn't know that.
There's a random candle. Oh my god, can we clean it? Can we just see if it fits first?
Oh, I don't even know if it fits. We'll never do this ever again. Yeah, we will,
because it's easy to get this thing in and out. It's a bit filthy, isn't it?
Your kitchen. Oh, is it? Yeah, you designed it. What's that? Sounds like Otis. What's that?
Does it fit? Soon find out. Oh, it doesn't fit. It doesn't fit because...
There we go. Because I couldn't get to the back because it's such a tight fit.
It has to go straight down. So I had to pull the drawer out a little bit.
Yeah, look at that. Actually works pretty good. And it doesn't move. How's my tolerance on that?
Not quite square, but... All right, let's get some stuff in it. What do you reckon?
Better? All right. Show me, I want it in there. At least it fits. I like it.
What about the tassie oak? Great. Matches the topper on the TV unit just to your right there.
This timber is the same as that. These are the old floorboards out of the house.
Should probably make a thing. I don't do that. How long does it take you to make it?
Like two years. Look at that. How many more knives could you fit in? I can wait another
three years for you to make it. Nah, but I just, I worked out, I've worked out a way to make it
much quicker. Okay. Yeah. Well then you can do it. Do it. But I'm not waiting two years for my knife
like that. That's all right. Put your sharp things at the back and then put your other things at
the front. That's very smart. This one. Yeah. Now you've got to do one for that. Yeah. How long
is that going to take? Not two years because I worked out a better way to do it. I might
have already done it. Do you want me to go get it? I've got a different option for that. I'll go get
it. All right. Got all my bits and pieces. Oh, what's this? Look at that. Fancy. What's that?
What is it? Yeah. You're a designer. You should be doing this. What do you mean? I don't even
know how to draw this. I'm just finding this stuff on the internet and printing it out.
I have printed chocolate things and I don't know if it fits yet. So let's see.
This was my solution to not taking two years to make this thing again. How long did that take?
Well, it took a long time, but it didn't take my time, if you know what I mean.
It printed for, each box takes about four hours. Yeah. So you just print them,
go to bed, print another one. It takes a couple of weeks to print that much stuff.
Those things, each grid only takes like an hour and 20 minutes.
That was a straw. There's a lot more stuff in this straw, but let's just get it out.
Matches, random knife, handle. This is the best thing ever invented.
Might be able to get rid of the fishing knives out of the, um,
so I did measure this straw, but I haven't tested this. I've got a five by five, three
of them by two of them. Yeah. So I've got like a two mil gap there and maybe a three mil gap there.
So they do move a bit, but I can print little, um, holders or if it's perfect and it works,
just put a tiny little dab of glue in like two spots and it'll work. And then I printed
a variety of different size and shape bins. That's the chocolate that I told you to get.
Yeah, this is the color you asked for. So this is matte dark chocolate. Okay. I think,
but what I was thinking is. That looks nice. Small thing. That looks nice. I'd go small,
small, bigger, bigger, bigger, bigger. That one's a bit dirty because it's been in the shed.
Bigger, biggest. How's that? A bit filthy. Oh, we'll just wipe them down later. But yeah,
see how they do move a tiny bit. But what I can do is there's these little, um,
like half circle retainers that you just push down the back. I'll just put one of them at the
back and then it won't move. And look, there's only a two mil gap side to side and I can do
the same thing there. So without going like full custom, it's like 99.9% fit. That color worked
really well. Yeah, it works better than I thought it was going to. Did you know we had, um, whiskey
rocks? We can't do it to ourselves. It's all been ruined. Matches. Oh, that's very neat.
Yeah. It's going to be quite satisfying. Well, this is kind of your forte. Yeah. Wine, stuff,
tea, stuff, straw, stuff. Well, I'm just working out how it works. Straws can probably go in the
bottom. Here's the thing about these things. If you think that there's one,
like I could make one wide this way. I just thought it was better that they go that way.
And where's our cheese knives going? They're somewhere. They're here. Specialty knives.
This is great. Because I didn't realize we had three lighters.
So many tongs. Which ones? All of them. Can we just like narrow it down? We can get rid of that.
Good time to cull. I bet your straws, they should probably go in this one.
Well, then it's too hard to get out. We'll throw the box out. Dono has a thing, box.
If they're good quality boxes. Original packaging and it drives me if I ain't. Do you need this?
Can't stop opening and closing the drawer now. Yeah, it's a very good thing.
Which one's better? I think I very much like the look of yours. The timber one is beautiful,
but I don't really like the fact that it took two years to finish. So I much prefer the efficiency
of the top drawer. And I also quite like that dark color though. I think that actually looks
really good. I am surprised at how nice that color looks and how much it works with our.
Our 3D printed plastic looks. It actually comes out better than I thought as well. I'm quite
surprised. Yeah, well, I've scrapped that and I've refined my color choice. Well, I have done
better. You chosen for me and then they look better. And also I've got, I've got some material
to print and test that's in what they call a wood fiber finish. So I might need to test. I can
compare the, the wood version of 3D printing to actual timber. Yeah. What I do, I do really like
those little details. It can be obviously you've got much thinner, more refined edges. Yeah. Got
little, little beveled edges. Cause these are actually designed to be stackable. So if you had
a really deep drawer, you can actually, these bins fit perfectly and there's a little lip and
there's a lip on the bottom and they don't move when they're stacked. So you can stack them up.
So you could put like another one, like this way across it as well. And they just,
it all works in the little grid. I really just, I don't even know who I am right now. This looks
like someone else's kitchen. You've made it so. Well, everything's got a place now,
so it has to go back. You've made it very streamlined and it makes me feel good. So thank you.
I like it. Good. Whee.