How to Pin Curl using the Roll and Go Hair Tool

Candid Looks
62 followers
4 Video Views·Oct 30, 2022
In this video, I'll be showing you how I create perfect pin curls with the Roll & Go hair tool.
I use the smaller side of the tool to create medium-sized pin curls, measuring about 2
centimeters wide, about the size of your thumb. You do not need much to create a good pin curl
wet set. Just a setting product, water, something to secure the curls, and a comb.
For my pin curl wet set process, I like to begin on freshly washed hair. My hair has kind of dried
a little bit, but it's still quite wet. I do have a spray bottle of water for any pieces that do
seem a little bit too dry. The setting product that I use is the Lottabody Setting Lotion.
I have mine diluted here with some water in a spray bottle. For wet hair that is clean,
I like to do a 1 to 3 dilution ratio. So for every one part Lottabody, I have three parts water.
You can experiment with different setting lotions and different ratios to see what works best for
you. The first thing I like to do when I get out of the shower is create my hair parting. That way
it's nice and crisp and can form with that hair memory. Typically, I use an ear-to-ear part. Now
that means you're going to have your hair parting go from one ear all the way to the neck. So as if
you were to pull all this hair back, the hair parting connects completely. That's a great
standard way to think about your hair sections. You're going to have this front section,
the bang section, this front section, and the back. You can go about your hair sections and
your pin curls so many different ways. If you're just getting started, I think it's easy to keep
it simple. Depending on what size your pin curls are going to be, that's how large your section
should be. So if I'm going to use this tool to create the pin curls, I want my sections to be
about the size of this circle. We're going to do two sections for the bang. So I'm going to start
that ear-to-ear part all the way back here. I'm just going to use these large duckbill clips.
And to keep this pin curling tutorial very beginner-friendly, I'm not going to
worry with the direction or what type of pin curl it is. We're just going to do
one direction and we're going to do one standard lie-flat pin curl.
At the hairline, create a square with your comb and you want your square to be about the size
of the circle of the tool. You want it to be about an inch. So this piece of hair has
almost completely dried, so I'm going to wet it with some water before I apply the setting lotion.
I'm going to take the tool, wrap it around, and roll back. Now the great thing about these tools
is you can literally stick your thumb in and grab the hair and keep winding. You can lay it on top
of itself like this so it's very on base. Grab your duckbill clip and pin it in place right through
center, digging that bottom duckbill clip underneath all the hair sections or all the hair
and clasping it on top. Something you might have to do a couple times before you get it just right.
If you do not have duckbill clips, you can of course use bobby pins. I recommend using two
in a crisscross motion. So typically when I do my rollers, I kind of worry back to front,
and with pin curls you can definitely do that. You may find it easier to work back to front,
but for the purposes of this video, I didn't want to have the pieces of hair in my face,
so I did the front section first. You want to make sure that none of your ends are pointing outwards.
These little pieces, they want to come out really bad. It's harder when you have your
hair at different lengths too, and if you're having that problem, just like with rollers,
you can always change your section, make it smaller, and try again. I try to tuck that end
piece in right at the beginning of rolling. That way I know it's in there. Sometimes I have to
shove it in there with my thumb. Now we've done two and that's exhausting.
So now you can add a second row behind the first row if you like.
Our first little quad pin curls, and what we're going to do is continue
these rows all the way down, and let's see if we can do two rows of two. We can do four on top,
four on the side, or four on this side, and then we'll see how many we need for the back.
You can divide this in two. What's really helpful with creating your sections too is having a
rat tail cone. It'll help you adjust the size and the shape of your sections.
You don't want them to be too big because then your curl won't hold. You don't want them to be
too small because then you'll get like a really wiry crunchy curl. Again, watch out for these
little straight ends. See how my section is a little long? It really shouldn't be that long.
If you're having trouble with those ends, it might be time to reform that hair section
and make it a more defined square. For these front side sections, I did roll them a little
larger because it seems that I have less hair, and I think that's okay as long as the curl
isn't going to be weighed down. I always try to comb out each section very smooth before I apply
the hair to the roller. That way it is flat like a ribbon and the curl will be as smooth as well.
So I repeated the same process on the other side, creating four pin curls or two rows of two.
That way everything should be pretty symmetrical once it's brushed out. Now that the front is
complete, we can move on to the back. For the back, we essentially just want to repeat everything we
just did, creating those rows and then even sections about the size of the curler. I am
positioning a handheld mirror in front of my vanity so that I can see the back of my head,
and sectioning off that lower row of the hair. You can use your fingers to grab your first hair
section and pull it towards the front so you can see it and apply your setting lotion and begin
the pin curl process. I like to work side to side and start with the curls that I can see.
I'm keeping these pin curls on the thinner side since these sections are quite long.
And for the purpose of keeping everything simple, the setting of the back will just be
halfway down the head with the curlers facing towards the face. So these first initial pin
curls are rolled towards that left ear. Now we can repeat this process on the other side,
curling the hair under, rolling towards the ear. Alternatively, you could just roll all the pin
curls in the back in the same direction. The main point is that the curl is going to fold
under at the ends. But if you've never used the tool before, you might find it easier
to divide your hair down the middle and roll towards you in a way that you can see.
So I continued some rows onto the back and I ended up needing one, two, three, four rows of pin curls.
And you can see at this point, anything that is coming out, you're gonna have to redo that curl.
Trust me, even though it's a pain, it is totally worth the hassle of redoing that section.
This process took me about an hour. It definitely takes me longer to do pin curls
than rollers, but it is one of those things where you're going to set your hair and it's going to
stay curled, usually for multiple days. It is kind of a tedious, labor-intensive process,
especially at the beginning. If you're just starting to learn,
especially doing the back of your head, it can seem so exhausting. So pace yourself,
be patient, and just know that it will get better and it will get easier over time.
And there is so much trial and error that goes into these hairstyles,
which is what I've been learning over the last year. So it's nice to share my experiences here,
so hopefully that can take some of the troubleshooting out of the process for you.
I'm going to take one more spritz of setting lotion just to make sure everything is saturated.
So there you have it, the completed pin curl set using the Roll & Go hair tool.
So coming back for the brush out and we will see how it turns out.
You can find the Roll & Go hair tool and many other styling products
on VintageHairStyling.com. To see how I sleep comfortably in pin curls,
I have this video for you here. Stay tuned for the brush out and styling tutorial.
