How to make a Concrete Counter Top in 1 hour!

Ceramik
19 followers
6 Video Views·Oct 27, 2022
What is happening everybody? My name is Michael and I'm going to show you the quickest and easiest
way to make a concrete countertop. Let's make something cool.
No doubt by now you've watched at least 100 concrete countertop how-to videos and not one
of them's the same but they all seem to have at least three frustrating things in common.
A lot of work. They all seem to require three to seven day cure time for the tops and they make
the project look like one big huge pain in the ass. I'm gonna make you two promises. After you're
done watching this video I promise you that this is going to be the quickest and easiest method of
making a concrete countertop that you have ever seen and I promise that you'll never have to watch
another concrete countertop video ever again. So this is where it all begins. This is just a simple
mold made out of a simple box. But this is where we can make the concrete do whatever we want it to
do and you can make this any shape and size that you want. You can make this a square shape, a
rectangle, L shape or a half moon, a heart shape. I'm not saying that I've done that before but
this is America and I can do what I want. But I'll make a separate video on all the different
mold making techniques but for now we're going to stick with this two foot by four foot rectangle
and you're going to see how this is going to make a statement all on its own.
And I'll show you some cool stuff along the way. In making concrete countertops there seems to be
about three basic methods. The first method, cast in place. Cast in place is probably the most
traditional way of making a concrete countertop. It involves making a form directly over the
cabinets, pouring in place and then troweling the top smooth. The great part about this is that
you're pouring right where you're going to be installing it so the installation is already done.
On the other hand you're going to have a big fat mess on your hands and you have to rely heavily
on your troweling skills. The second method is GFRC, glass fiber reinforced concrete. It's light,
it's strong, it looks great. But this requires special order materials and tools and it's just
not practical for the everyday DIYer. The third method is inverted cast. This is the way that you
and I are going to do this. This is probably the easiest and fastest way to make a concrete
countertop. It's quick and easy, there's minimal mess and there's no troweling skills involved
because the mold does all the work for us. And yes you'll have to install a big heavy slab of
concrete but you have about over 500 friends on Facebook. I'm sure that two or three of them are
going to help you install this bad boy. So what makes my method so much quicker and so much easier
than all the other methods out there? It's mainly to do with the material I use. So let's go pick
up our concrete for our top. You know what that means. Depot run! Let's make like a transformer
and roll out. This is the star of the show right here. We're going to use RapidSet mortar mix.
RapidSet is exclusive to Home Depot so you can get it anywhere else. This guy will go from a half
inch thick to six inches thick. It is rock solid in one hour. One hour later it's 2,500 psi.
28 days later it's 6,500 psi so I'm not even going to bother putting any mud over it. RapidSet
cement is a CSA based cement so it is three times stronger than any Portland based cement.
For our project we're going to get two bags. Oh and before I forget also while you're here pick up
two baggies of flow control. Don't forget you're going to want one bag of flow control per bag of
mortar mix that you get all right? Don't worry I'll explain later.
To construct our mold we're going to be using a material called malamine. Malamine is a particle
board with a smooth plastic finish. Our countertop is an inch and a half thick so I'm going to rip
the sides at two and a quarter to accommodate the thickness of the three quarter inch malamine.
Since the construction of this mold is very simple I'm not going to spend too much time
going over the assembly but I do want to share some tips. All right so you guys can use whatever
kind of screws you want or whatever method you want to get this box together but what I highly
recommend are these Spax multi-purpose construction screws specifically the wafer heads. These guys
have got a nice flat head bottom on them so that way you're not going to have to do any kind of
pre-drilling and you're not going to split the wood as you screw these guys together.
It's going to make life way simpler you're going to get this box together way quicker.
We have our box assembled the only thing left to do now is to seal the corners with a caulk.
We're going to use 100% silicone to seal the corners of the mold. After running a bead of caulk
we're going to spray a foam window cleaner on top to prevent the silicone from sticking to
any surfaces we don't want it to. When we run our finger down the bead to make it smooth
this will make clean up a breeze. That's it guys we're gonna let the silicone set up for
about 24 hours and then we're gonna pour this bad boy. I don't know about you but
I'm excited about this. Make sure the mold is flat and level before you pour.
All right so we're going to prep our mold and we're going to do that by spraying it down with
WD-40. It's going to make a great release agent so that way our concrete countertop is going to
pull away from our form with no fuss from us. We just want to get a really good coating on this
but we don't want any standing puddles and that's pretty much it. We're ready to pour at this point
but I want to take it one step further. I'm going to add a design by simply cutting a stencil out
of a sheet of paper. I'm then going to sprinkle dry sanded tile grout over the stencil using a
foam cup. I'm going to continue to sprinkle the tile grout on the mold to mimic veins for a natural
stone look.
It's a good idea to stage your workstation next to your mold. It'll save you time and a lot of energy.
Make sure to use cold clean potable water. All right this is where I want to stop and make sure
that I've got everything I need. I've got my concrete, got my bucket scraper, I've got my
flow control, got a trowel on standby, got my drill on hand, clean water, and make sure that
you have a bucket with water for cleaning your tools in. Once we get this past this point and
we start pouring our concrete it's go time guys. We're going to start by adding five quarts of
water to our mixing bucket. Then go ahead and dump an entire bag of mortar mix into the mixing bucket.
I strongly suggest mixing one bag at a time especially if you're doing this alone.
Then switch your drill to a low speed and mix.
I cannot stress to you the importance of doing the Captain Morgan stance.
We're going to start off with a peanut butter consistency but for our project we want a more
pourable consistency. To accomplish this we're going to add one packet of rapid set flow control.
Flow control is a plasticizer that will give us an instant
pancake batter consistency without losing any strength or set time.
That's six dollars I've ever spent. Bucket scraper.
All right at this point we want to take a nice straight board and just run it across the top.
This is the technical term for this is a screed but it's just a board.
All right at this point we're just going to let it sit.
Once this guy starts to kick and we're going to know because it's going to start to get light
spots then we're going to want to keep it wet keep it saturated. We're going to start water
turning it for one hour and after that we can go ahead and flip this bad boy over and we're done.
We need to work the bubbles up so that we don't have any voids in our concrete.
We're going to accomplish this by tapping the sides with a hammer
or vibrating the sides with a sander. You only have to do this for a few minutes.
What do you guys think? Took us about like what 30 minutes to make the mold,
about five minutes to mix and pour. One hour later we were able to flip this guy over
and now it's ready for service. You guys remember how I didn't put any kind of reinforcement?
Check this out. I could tell you how much weight's on here right now but
that is none of your business. Now sure we've got some pitting going on here from the grout
but we want that. We're going for a natural stone look and the cool part about a project like this
any mistake you make just adds to the character. Bob Ross said it best, there are no mistakes
just happy little accidents. Thanks Bob Ross. So at this point there you have it. It's all done.
Right now we could seal it with a clear coat. This is where we would put some sort of topical
stain if we wanted to. You could also grind it smooth if you wanted to but you're going to find
that using this method you're really not going to need to because we have this nice silky smooth
finish on the top. We have nice rounded corners and they're not sharp. You know what? I want to
take it just one more step further. We're going to give this guy a live edge simply using a mason
hammer. All I'm doing is going about an eighth of an inch or so away from the edge. I'm taking
the pointy edge of the hammer and I'm just giving it a light tap and then a little harder if needs
be and then just do that all the way around. Flip the countertop over and do the other side.
Go slow at first. Go easy but for God's sakes please use your safety glasses and your patience.
Instant live edge for a nice cool industrial look. Just spice it up a little bit.
So we could easily install this on a cabinet in a kitchen or a bathroom but I want to do something
just a little bit different with this guy. My cousin has got this wonky coffee table and
I want to make him a really cool coffee table. Let's replace that. What are we going to make
this coffee table out of? I'm glad you asked. What? You guys don't have a big mountain of
pallets just hanging out behind your shed? Let's do something with that.
We are going to glue this top on with Rapid Set's
Flexible Construction Adhesive. This stuff sticks to just about anything.
Guys thank you so much for watching my video. Truth be told this is my very first video.
So let me know if you liked it by hammering on that like button and if you want to see some
more videos like advanced mold making or just getting back to basics with tools. Hit that
subscribe button and I would love to take you on some more adventures with me and see where this
goes. Let's make some cool stuff and I'll see you in the next video.
