Hướng dẫn cách làm thạch rau câu 3D VỚI CHUYÊN GIA NGỌC HUỆ - BEEMART

BeeMart
6 followers
4 Video Views·Oct 20, 2023
Hello everyone, welcome to my channel
Today, I'm going to share with you how to make a beautiful cake
However, during the process of making the cake, there were many problems and difficulties
First of all, you need to know how to make the cake
Because I already have a recipe for making a cake
There are a lot of types of flowers
And there are a lot of types of flowers
The most commonly used type of flowers is the wild rose
This type of flower is also used in the cake
And the cake is very easy to make
Because of this type of flower, it is more tough than other types of flowers
So this type of flower is often used to make cakes
I also have a product
The amount of water used to make the cake is very limited
For example, if you add a lot of water to the ingredients to make the cake
The cake will have a lot of milk
Milk is used to make the flowers
The milk used in the cake is milk
The topping is to use the wild rose
If you want to make the cake easier to use
I recommend you to use the wild rose
For the wild rose, we need water
I use a bag of wild rose
The second part is the flower
We will use the wild rose that we are going to cook
And we use the topping milk
And the last part, we use the wild rose
We will use the wild rose that we are going to cook
We will use the wild rose
First, we prepare 1.5 liters of water
Put the bag of wild rose in the pot
The water is cold. The lamp is open
We will cut the bag of wild rose
The bag is soft
We have to stir it all the time
The wild rose will melt
Then we will let it soak for 15-20 minutes for the water to come to a boil.
After 20 minutes, the water will come to a boil like this.
And I will turn on the stove.
We turn on the stove with high heat.
And leave the water to simmer.
Are you afraid of burning?
I'm afraid.
I'm afraid too.
But there is nothing here like the bottom of the pot that is not burnt.
Because when we put the sticky rice in the water, it will melt.
But it doesn't sink to the bottom of the pot.
But it's floating in the water.
That's why when we turn on the stove with high heat, we're still not afraid of burning it.
As for the crispy rice, when we put it in the water, all the crispy rice sinks to the bottom.
It's boiling.
In the previous lesson, you said that we should soak the jicama first.
In that case, you usually cook coconut jicama.
You can mix sugar with jicama.
But for the 3D cake, how do we need our base?
It will be yellow, it will be caramelized.
After the foam is gone, we will add sugar here.
If you are afraid, you can reduce the heat.
Or we can leave it boiling like this.
And we use a ladle to hit the bottom of the pot.
Because sugar is heavier, it will sink to the bottom of the pot and burn easily.
Remember to stir immediately.
And we will wait for this mixture to boil up again.
And remove the foam one more time.
Now I'm going to remove the foam a second time.
Remember to use refined sugar.
Refined sugar makes our jicama clearer and whiter.
After removing the foam a second time, you will look at the pot and hear the sound of the foam.
The foam is very big.
When it boils like this, we leave it for about 1-2 minutes.
After 1-2 minutes, we will turn off the heat.
And we take the lid and put it back in the pot.
We leave it for about 1-2 minutes, depending on the amount of jicama in the pot.
If you cook in a big pot, you can leave it for 3-5 minutes.
There are 3 reasons why we put the lid on.
We usually use the jicama.
And this jicama is a type of jicama.
And the third reason is for our jicama.
And now I'm going to open the lid and remove the foam one more time.
And then I will use a sieve to filter the jicama through the sieve.
And we wait for the foam to rise.
When the foam rises, we will wait for it to spread its surface.
After waiting for about 5 minutes, we will use the sieve to filter the jicama through the sieve.
And we pull it like this.
So our jicama will be very clear.
Now we will prepare the jicama.
First, we will prepare a pot to prepare the jicama and milk.
Now I will freeze the jicama.
If you don't have time, you can cook the jicama at home in the morning to wait for it to freeze.
When I cook, I will cook about a cup or a small bowl.
In the afternoon, I will put it in the pot and cook it again.
And it will melt like this.
And we will freeze it.
Now we will freeze the jicama.
We will freeze the jicama.
And we will freeze 3 cups of milk.
We will filter this part so that it melts and mixes well.
When I first started working, I used condensed milk to cook.
I can use condensed milk, but condensed milk has a smell.
Some people don't like condensed milk.
I don't like condensed milk.
And my condensed milk has a brown color.
Condensed milk has a brown color, so coconut milk can be added.
But I have to use coconut milk.
Because coconut milk has a smell.
So it doesn't smell bad.
If you use coconut milk, it will be delicious, but it will smell bad.
You can use any kind of coconut milk.
Now I will show you how to make a pink jicama flower.
Before we use this tool, we will take it out and boil it.
And we will use it.
Now we will mix the colors.
I will use pink.
And we use the core.
We use the core and we just take the color.
Stir well.
And I just add a little bit at a time.
If I see the color is suitable, I will stop.
Depending on the degree of color I want, I will stop.
Now we will take the color.
First, we will push all the air out of the cylinder.
And we put it in the color.
Then we pull the piston up.
And you notice that when you pull it, don't let the air inside.
Because if there is air inside, when you catch the flower, it will not be beautiful.
And if any of you, after pulling the color, it has air like this.
So the color in here is easy to come out and hurt your hand.
In this case, I will tilt the piston upright and push it up.
Push all the air out.
Then we put the needle in.
This is the rose bud.
And now she will go to the flower.
The position of holding the needle, we will hold it like this.
We will hold it like this.
These four fingers press into the needle body.
And our left thumb puts it on the piston head.
And we will stand up straight.
First, we will stand up straight.
Then we will lift the needle up a little.
And we push the rose bud in.
And just push and pull in the middle of the road.
So the rose bud does not touch much.
We can use the needle.
And the rose bud must be held close to the needle.
And we hold the needle.
The rose bud is parallel to each other.
It is opposite to each other.
The back bud is facing the front bud.
If you want your flower bud to be light.
The inside of the flower bud is dark and the outside is light.
I will do it like this.
First, I will pull this pink color.
And then I will put it in a white bowl.
And I will add more white in.
So that's our color.
And many people ask.
I don't know the function of this needle.
Today, I want to show you many kinds of flowers.
For example, rose petals, rose buds.
So today I will use this tree.
This tree and I will use this bow to go down.
And I will go like this.
I put this tree in here.
And I will cut.
I cut along my rose petal.
Then I use my colored rubber band.
I put the needle in.
And I will pump it into the position I just cut.
About the position I just cut and where I just pumped the flower into.
So my flower bud is gradually.
Next, I will continue to cut the next flower bud.
Then I will pump the color into it.
Do you see the flower bud is curved?
The white head is a bit curved.
The outside rose petal will be bigger.
Because of that, the outside rose petal will be wider and bigger.
Now I will show you how to go through the leaves.
Go through the leaves, we don't go right into the cuts we just went through.
We go far away.
We don't go into these cuts, but we go far away.
But don't go too far.
If you go too far, when you shoot later, you will see the corner of the leaf fall out.
It's weird.
And the leaves, we will go straight.
Straight a lot.
Because of that, we can't hold the hand like this.
And we go through the leaves.
There are leaves at the bottom, there are leaves at the top.
And the leaves, when you go, you usually go along the curve.
Going along the curve is more beautiful.
It's easier to decorate.
And I go through the leaves around the flower, like a flower.
Because of that, I go through the flower along the corner.
Here, I divided it into 3 corners.
Next, we will go through the white petals.
To make the flower more vivid and the color more harmonious.
I use this needle.
This needle, I will go.
If it is stuck in this line, it is difficult to put the hand.
Then this needle, I can break it a little bit.
It's a little bit like this.
Then when you go in, it's very easy.
I also go up and down.
I go down the needle, then I stop.
I stop, I squeeze it out.
Then I squeeze it out.
Next, we will use the color to draw.
And when I draw the flower, I will go right next to the flower.
I don't have to mix colors, I don't have to draw colors.
I have covered it all.
After I finish drawing the color, I will wait about 2-3 minutes for the color to dry.
To cook this base, I cook the same as the green beans.
But I will reduce the amount of water.
Just now I used a pack, I will cook 1.5 liters of water, right?
So now I will reduce it, I cook about 1.2 liters only.
The rest I will put in the ingredients I like.
For example, coffee or coconut milk.
Here I don't have that ready.
I don't have that ready, so I use the topping.
And I have to let the topping cool down completely.
If it is still cold, when you put it in the hot water, it will have milk bubbles.
It doesn't look very delicious.
Now my base is boiling, it's boiling.
So now I will take the bean sprouts and put them in.
Now my cake is cold, I will take the cake out.
First, I will use a knife or my fingers to make it airy here.
This cake is cold, if I use natural milk.
And if I use milk topping, I can keep it for 5 years.
