Giant DIY Yamato RC Battleship: Scout Plane Launch & Gunfire!

Battleship
6 followers
19 Video Views·Mar 28, 2026
AI Generated·May contain errors
The first idea is to build a clean ship capable of launching micro-clean ships.
As it really is or like the game World of Warships.
The smallest clean ship I've ever made was about 40-35 cm.
So I need to build a ship that matches the size of a scout ship.
I chose Yamato because he is a legend, the largest clean ship, and the biggest weapon that can be produced.
This is the Nakajima E-8N, the seaplane ever built by Yamato.
But I won't be using it; this is the Kawanishi E-15K Shun from World of Warships Yamato.
I chose this ship because it's easier to build.
The largest clean ship is 14 m, so if I make a clean ship 30 cm,
The largest clean ship is 1400 cm, shared with a clean ship of 30 cm.
The largest clean ship is 46.66 cm or approximately 47 cm.
A 147 cm clean boat is somewhat unusual for a clean boat model.
The largest clean ship is 148 cm, so this clean ship is 1400 cm divided by the clean ship of 48 cm.
The largest clean ship is 29.1 cm; I think this ship can still fly.
Okay, now I already have the clean ship's size, so how big is this clean ship?
The clean length of the Yamato is 263 cm, so with a clean length of 148 cm, the clean length is 148 cm.
This clean boat is 266 cm, equipped with a 48 clean boat.
5.48 meters. So about 5.5 meters or 18 feet in length.
The largest RC boat I've ever built is 4 meters or 13 feet long.
Made from foamboard and using a waterline model design.
This means the vessel does not have a submerge hull; all parts are above water.
This ship is very stable, but when heavy rain comes, the ship is no longer stable.
This is the 3D model I created in Blender to build an RC battleship.
A true ship has a submerged hull.
Using the 3D print add-on in Blender, I estimate that I'll need approximately 30 kg or 66 lb of ballast.
in order to submerge the red hull part.
Therefore, to reduce the required ballast, I will redesign the model's waterline, but with a full keel.
A few ballasts under the keel.
I think it would make the ship more stable and also not too light when rain comes.
Then, here's the build montage.
The real base ship is now complete.
It is made from foam board.
You can see the plywood manufacturing process.
Here, the ship will split into two parts.
This is a keel made from 3 cm plywood.
The PVC pipe is equipped with a wet ballast.
For propulsion, I was inspired by this YouTube channel, Maker Fabio.
He made an outboard motor, but with a real motor inside the water.
So no equipment is needed; it's a very simple solution.
You only need to cover the motor part with electronic liquid coating.
I need to make sure he can kneel first before proceeding with the project.
Since he doesn't have the details yet, I can use my car to transport him.
The pond where he will kneel is near my house.
Just half a kilometer or one and a half blocks.
I have a bad ESC, so I can try out its motor.
Like this.
Good luck; we're bringing a fishing line to haul the ship.
She can kneel perfectly and very stably.
It had a little water in it, but it was unable to kneel.
I will explain why, then, when I am able to show something.
Actually, shooting a Roman candle into a tree is dangerous.
It could cause a forest fire.
But this time, everything was clean from the heavy rain in the evening.
So, it's safe.
I am using 4mm plywood for the boat deck.
After this, I will cover it thickly with wood.
To make it a darker color.
How does the shooting mechanism work?
Basically, this ship reduces battery.
And because the kernel is extremely small,
This ship will burn quickly and cut off the short circuit.
That's why I said this ship cannot kneel.
Basically, this is a ship that is kneeling.
Not an ordinary ship.
I attached a styrofoam block and an empty bottle underneath like a ship.
I don't have enough time to build an RC boat.
So, I bought it personally from my friends, Hadi Pramono.
Actually, one of these ships is a static model, and the other one uses a capacitor.
Yet in the end, I changed the static model into a remote-controlled boat.
and the flying ship became a stationary vessel.
Because I can think of how to start the engine remotely on a flying boat.
And I announce that this project is complete by adding this Imperial Japanese flag.
After this, I will show you the maiden voyage scene and several action scenes.
Thank you for watching.
