Fiber to the Home (FTTH) represents the gold standard of broadband delivery, bringing ultra-fast, low-latency connections directly into residential spaces. In this video, we break down the full delivery path—starting at the central office (CO) and moving through the distribution network, optical splitters, and into modern XGS-PON systems. Along the way, we explore the critical role of Optical Network Terminals (ONTs) as the bridge between fiber signals and in-home Ethernet, showing how each piece fits together in the architecture.
We also take a close look at real-world deployment challenges: aerial pole runs versus underground conduit, the trade-offs in cost, durability, and maintenance, and the engineering considerations that shape FTTH rollouts. Whether you’re an IT professional, a student, or a technically curious viewer, this video delivers a clear, detailed look at how service providers extend light-based connectivity to your doorstep—and why each step of the design matters for performance and reliability.
Fiber to the Home, FTTH, XGS-PON, ONT, Optical Network Terminal, Optical Splitter, Fiber Internet, CO Central Office, Broadband Architecture, Fiber Installation, Aerial Fiber, Underground Fiber, Pole Transmission, In-ground Conduit, Gigabit Internet, 10G Internet, Passive Optical Network, PON, Home Fiber Deployment, Internet Infrastructure, ISP Fiber, Next Generation Broadband, Fiber Optic Networking, Fiber Optic Technology, TechSavvyProductions
We are going to be looking at some of the cool technologies involved in Ethernet.
Now, the Ethernet Alliance produces every year what's called a roadmap,
and in it highlights new technologies,
new standards that are implemented for that year.
In this case, we're going to be looking at
the Ethernet Alliance's Ethernet Roadmap for 2025.
In it are lots of cool technologies involving
networking that are of interest to any IT pro or IT student.
Let's jump in and take a look at one of those.
This featured in the Ethernet 2025 Roadmap,
and that's fiber to the home.
As of 2025, about 19 percent of Americans are connected by fiber to the home.
Delivering Ethernet, multimedia,
whatever is being delivered by your broadband provider.
Now, I am not sure of the percentage for Canadians, South Americans.
Put your comments if you're in those countries and you're watching this channel.
Would love your feedback on what is your country or your area's
percentage of broadband being delivered by fiber.
I know Europe is going that direction.
In fact, it has surpassed DSL for Europe.
There were five big milestones that really have changed
the dynamics of fiber to the home.
In 2013 to 2015, the EU made some major changes in policy.
The US FCC broadband goals changed significantly,
really kind of upping the amount of megabits per second
download recommendations and upload recommendations.
Then there was the new launch of the ITU standard for XGS PON,
or the Passive Optical Network,
which we'll see plays a major role in fiber to the home.
Then, of course, China's broadband plan,
which really put 300 million fiber to the home subscribers.
We saw that Japan and South Korea reached almost 50%
of fiber to the home penetration.
COVID-19 in 2019, we saw work from home and remote education
really creating a high demand for fiber to the home.
And then lastly, the infrastructure bill here in the US
proposed about $65 billion into broadband delivery,
which fiber to the home was an important part of that.
So those are huge things that are really driving
fiber to the home.
Now, fiber to the home or any broadband delivery
of ethernet to your house, your apartment, or your office
starts with a central office.
It can be very different for every geographical area,
but this is a typical CEO of a company
that's delivering broadband to a geographical area,
and I'm not sure where this is being delivered at.
But this is your central office.
You're going to have a lot of high-end,
very expensive network gear in these data centers.
Your central office is very important,
as you can look at my fiber to home architecture
here in this graphic.
Here's where you get your PSTN network,
your POTS telephone system brought in.
You get the internet, local TV broadcast signals,
all of the media that's going to be delivered
via broadband in your area or by your vendor,
whether that's Comcast or whoever is brought into the CEO.
And then it's all turned into digital.
And at that point is where we begin in some companies
moving it from this CEO, from that point on,
it's going to be passive optical network, PON.
Then eventually it gets to your home
where it's delivered via fiber
and then converted into ethernet.
If you look at the generation of PON
or passive optical network,
which is real critical in delivering fiber to the home,
you can see the generations of E-PON, G-PON, XG-PON,
and then XGS-PON.
Well, XGS-PON is the new standard for,
you got it, Ethernet Alliance 2025.
And notice it's 10 gigs up and 10 gigs down.
So we're seeing symmetrical delivery of 10 gigabits
over these PON networks, passive optical networks.
With this technology, we can,
between wherever our CEO is and our residents are,
we can deliver fiber to the home using PON
with a maximum distance of about 20 kilometers.
So Mr. Vanderpool, do all broadband providers
have this kind of architecture?
No, they have a mixed bag.
They have old technology, new technology,
hybrid technology.
So nobody probably looks just like this diagram
or this graphic, except maybe new deployments
or spectrum is deploying to a new geographical area.
They may design it just like this.
If you step back and look at some of their old deployments,
they've got old ancient technology with new technology.
It's a very mixed bag out there.
So in our CO, all of that,
from the residents coming back to the CO,
they would pop into a piece of equipment
that looks something like this.
And each PON port can serve up to 128 residences
or apartment.
So every single port that you see
on this very interesting piece of a network of gear
can serve up to 128, what we call ONT.
And that's basically your resident piece of equipment.
Another slide of this technology,
you can see on the transmission side,
I've got a PON piece of equipment
that's going to then go into a splitter
right here in the center
that can take one PON optical output,
goes bidirectional, goes into the splitter,
and then it's delivered into these residences,
ONT pieces of equipment.
This particular vendor doesn't call them ONT,
it calls them O-U-N.
So everybody has a lot of their own,
basically the device in your house.
This is a great chart that shows you
the passive optical networks
that are delivering fiber to the home.
And you can see some of the old technology
as well as some of the XGS PON,
which is your newest, latest, greatest
passive optical network.
And you can see the wavelengths that they're using.
Now this is a closeup of that same chart.
So you can take a look at the nanometer wavelength.
You can see the nanometers and frequency
that laser is using for PON.
Another important advancement in fiber to the home
is micro-trenching.
Now this is being done a lot in Europe,
and Google Fiber, done in the US,
is also using micro-trenching,
where they're taking these saw blades,
cutting through asphalt and concrete,
and just cutting this tiny little trench in the ground,
putting the fiber optic cable in there,
throwing some kind of composite adhesive
over the top of all of that,
and delivering that last mile.
Here you can see the diagram, micro-trenching,
where you're cutting through rock,
asphalt, concrete, dirt, whatever,
and laying in your cables.
And here's a picture of where you can see
they can split it in different directions.
So they can bring a cable and then pass it
through different directions to different households.
Now you can imagine being put in the ground
or the concrete or asphalt in places
like Des Moines and Montana,
the jacket on that fiber optics cable better be tough,
because they got cold, hot, moisture, everything.
So the jacket around that fiber optic cable
has to be able to take some really harsh environment.
Now fiber to the home has to get to that final destination.
There's a couple of ways that it can get there.
It can go above ground,
which is typically called aerial or pole transmission.
It also can go in ground.
There are many situations where it uses both.
It delivered via aerial or pole,
and then eventually at some point goes into the ground,
depends on the neighborhood,
depends on the city, depends on where you're at.
In this picture, you see a technician on a pole.
He's actually working with really tough fiber optic cable
that he's bringing down from the pole down to a residence.
The technology and the connectors
are all built, designed to take this harsh environment.
Lots of products in this space,
splitters that hang on a pole, hang on a support wire.
You can have splitters, amplifiers.
You've got all kinds of things
that can make fiber to the home happen
in an aerial situation.
This is one of Corning's solutions
that allows them to take the fiber optics on the pole,
provide exit point for it to come off the pole,
down to the residence.
You can see it.
It's watertight.
It's very resistant to harsh elements.
This particular installation is near the ocean
where salt is a real corrosive factor, and it does great.
A lot of fiber to the home comes via in ground.
So here's an example.
You see fiber optic cables coming up,
and they're gonna be spliced into this junction box.
Here you can see a splitter
that can take a fiber optic input
and then break it out into a neighborhood.
This is common where we have both aerial
and in ground delivery of fiber to the home.
Now the devices inside the home are called ONTs,
and basically they're an interface box.
It takes fiber, converts it into ethernet.
Doing fiber to the home in the city is really complex.
Here you see a bunch of guys pulling fiber
through manholes in the city.
I wouldn't want that job.
Here's an example in the area that I am living at.
Here we see my local city county government
has its own fiber optics
to provide county city services to the community.
This is a local fiber optics company
that's delivering fiber to various neighborhoods.
Of course, not mine, but other neighborhoods.
And when they bring the splices up out of the ground,
these are splice boxes,
and they're indicated by these plastic containers
that protect the splices.
Anytime you're breaking out fiber
and bringing it to the home,
the cables and the jackets and the connectors
have to be really rugged
and able to take harsh and tough conditions.
There's nothing easy about an install technician
who's installing fiber to your home.
He's not the gentlest of souls.
Here's a 3M termination box.
It can be right inside the home and terminate that fiber
and then bring it into an interface box.
This is interesting.
This is an example of ADTRAN's complete package
that would deliver fiber inside the home.
They've got a nice interface box.
Notice they have an electrical outlet that they use.
They also have their interface box
and all the necessary trappings to bring fiber to the home
and produce ethernet for the customer.
Now, my son lives less than a mile away from where I live,
and this is his fiber interface box.
His neighborhood has fiber.
My neighborhood does not.
Don't you love it?
So here, the fiber optic cable
comes into the quantum fiber interface box
and you have ethernet out and a power cable.
Here I have another friend
who has fiber optics being delivered to their home.
And here you can see over the green is the fiber optic cable
and then you get an ethernet out
and you have one that goes to a wireless access point
to provide wireless to the home.
Here's another view and you can see I've got my optical light
so I can tell whether I'm getting the necessary optics
and laser light to this interface box.
So if that optic light is out,
you know you got problems with your fiber.
Lots of manufacturers out there
are producing the ONT, fiber to the home interface devices.
In our quick video that we've done on fiber to the home,
you may want to learn more.
Tech Savvy Productions is really
a serious technical channel.
If you want to learn more,
let me show you a few of our videos that we've done
that will take you to a deeper level.
DOCSIS is a standard that really
a lot of broadband providers use
and it's really important to understand DOCSIS
in terms of broadband delivery.
So if you want to know more,
I've got my YouTube video URL there.
I also have a QR code you can scan.
It will take you to the video.
This will take you in depth into DOCSIS 3.1 and 4.0.
If you'd like to know more about PON,
which we've talked about here,
that's the Optical Transmission System,
which is using Wavelength Division Multiplexing.
If you don't have a good understanding on it,
take a look at this video.
It's called Edge WDM
and it really explains some of the concepts in WDM,
which is what PON uses.
I also finished a recent video
on more in depth of the various types of optical fiber.
You can take a look at this one.
This is a deep dive, a lot of fun, very interesting.
If you're interested in optical transmissions,
all the different flavors of fiber optics
and how they get lots of data across one or two fiber runs.
All of our videos are produced in multiple languages
as well as many subtitles
for sometimes 30 different languages.
A big thank you to always our members,
our viewers and subscribers.
You can become a member, just click the membership,
join and you can become a member of this team.