We will cover OM1-OM4 multimode cables, and introduce the new OM5 cable for 100-400G. Understand cable connectors used in LAN and today's Data Centers. Build a modern transceiver, and learn about SerDez and the critical ASIC chips that drive higher speeds in the Data Center.
A critical view of the cost/benefits of transceiver options. Look at the MPO/MTP connectors and how they transform fiber density.
"Everybody can be great... because anybody can serve. You don't have to have a college degree to serve. You don't have to make your subject and verb agree to serve. You only need a heart full of grace. A soul generated by love." Martin Luther King Jr.
that I've done over the last five years is doing in terms of people watching. And if you'll notice
number one is a video that I did in 2011. Introduction to fiber optics used in the land.
Well a lot has changed since 2011. So this is a new upgraded version of that video. We're going
to explore the complex world of fiber optics in the local area network and in the data center.
Fiber optics in the local area network share many concepts and components of today's data centers.
The local area network has been stuck for years. We're still using Cat5, Cat5e. If you're lucky,
Cat6. And if you're really lucky, Cat6a twisted pair copper. And we're still delivering about
one gig to most desktops. Very few people are getting more than one gig at the desktop. That
should start to move as desktops start coming with multi-speed network cards and as enterprises
start buying multi-speed switches. If they drop in price, you'll begin to see 2.5 gigabits to
the desktop, eventually 5 gigs, and I feel at some point we'll see 10 gigs to every desktop.
When it comes to fiber, fiber is exploding. It is the go-to connectivity component of the future.
Local area networks typically use for switch uplinks from IDFs to MDFs, from servers to
high capacity server network cards to switches that are using say 10 gig and higher. But when
we get into the data center, fiber is being used almost exclusively because we're typically
wanting 100 to 400 gigabits on uplinks, 25 to 50 gigabits to servers, and at least 10 gigabits
to virtual machines. Fiber is exploding in the data center and that explosion will move into
the local area network. Two broad categories of fiber cable in the local area network in the data
center. One is optical single mode, which is called OS cable, optical multimode, which is called
OM cables, and this has to do with the size of the core. Single mode core is about 8 to 10 microns,
whereas multimode can be 6.25, which is old, to the newer 50 micron core sizes. Fiber optic core
size is really important. Single mode fiber cable uses a small core, 8 to 10 microns. This requires
more expensive electronics and more expensive lasers, but it gives us higher bandwidth and
longer distance. On the other hand, multimode has a larger glass core, about 50 microns, and it allows
us to use cheaper electronics and cheaper lasers, drives down that cost so that we can use it more
effectively as a tool for networking. This chart shows the relative size comparison between single
mode glass core, the multimode glass core, and the old 62.5 multimode glass core. Notice though
that there is a lighter blue around the darker blue. That's the cladding that is bonded to the
glass. And notice that all three have exact same size. So when you add the cladding to the glass,
you get in all three types of cable, you get 125 microns. This is OM1 fiber optic cable.
It's legacy. It is, remember, OM is optical multimode. The jacket color is orange. It has
a core size of 62.5 microns, has a maximum data rate of about one gigabit. When we installed this
in 1995-96, we were told at that time, this will never become obsolete. It's obsolete. OM3 fiber
optic cables are laser optimized multimode. The jacket color is aqua. The core size is 50 microns.
With a single fiber, we can get about 10 gigs using about the 850 nanometer wavelength. Distance is
about 300 meters. Now, if you switch to the connector that's at the top right, which is an
MPO connector, with multiple fibers, we can start getting about 40 gigabits, even up to 100 gigabits,
but our distance drops down to about 100 meters. Let's take a look at this chart. This is an
Ethernet chart showing us interfaces and speeds versus the type of optic cables that we can use.
Notice at the top, you've got one gigabit, and that's pretty well where you're stuck with OM1,
OM2 cables. As you get into OM3, we can see that we can get up to about 10 gig, and that's if we're
using an LC or an SC connector. Down, as you come down further, you'll see 40 gigabits of Ethernet.
We can use a multimode OM3 cable, but we have to move to that MPO connector. We can see it's
sliding down further, 100 gigabits. We could still use the OM3 cable, but again, we have to use that
MPO connector, and I'll talk about those connectors in a minute. OM4 fiber optic cable improved over
the OM3. It allows us basically the AquaColor jacket, the 50 micron core size, 10 gigabits
for a single fiber using the 850 nanometer wavelength. Distance, and that's the advantage
of the OM4, is the distance. You can see we're up to about 550 meters. So, the advantage of this
particular cable is longer distance. As we look at OM1 to OM4 cable standards, it's important to
also remember different industry groups apply different nomenclatures. So, I've got a chart
showing you the IEC's nomenclature for each of the cable types, TIA, EIA's nomenclature,
and then on the right shows you the loss of light per kilometer at different wavelengths.
Notice at the lower frequencies, 850 nanometers, all of these cables lose about 3.5 dB per kilometer.
That's why these cables do not work well for long distances. 3.5 dB is half of your power
every kilometer. This is unacceptable for long distances. Problems that face fiber optics are
light loss. This is something that every network administrator has to consider very carefully as
he chooses cables and connectors is how much light is lost from the transmitter to the receiver.
You can see in this diagram below, you can actually see the transmitter and the pulses
of light going down the fiber optic cable. And you notice that as we travel down the cable,
light is lost and the signal height is slowly growing smaller and smaller. As we reach a
connector, we see there's a significant loss of light. And again, as the light signal travels
down the fiber optic cable, again, there's a constant loss of light. This optic light budget
is something that you must calculate to make sure from the transmitter to the receiver,
you have enough light to get there. OM3 and 4 fiber optic cables are both laser-optimized
multi-mode fiber and were developed to accommodate faster networks for 10, 40,
and 100 gigabits. Both were designed for use with the 850 nanometer vertical cavity surface
emitting lasers, and they have aqua jacket colors. Due to the need of longer distances,
OM4 plus, an enhanced version of the OM4 cable is now being produced and its jacket color is
violet. It allows the same bandwidth, but it allows signals up to 300 meters.
In the video that I just finished on OSI layer 2, the WAN technologies, I covered dense wave
division multiplexing, which is giving us terabits per second, but it's using single
mode fiber optics. There's also available for single mode fiber optics, coarse wave division
multiplexing, which is giving us incredible bandwidth and distance for this technology also,
but again, it's using single mode fiber optics. If you would like a review on that technology,
you can go to my channel and look at the OSI layer 2, looking at the WAN and its technologies.
So, in order to bring this wavelength division multiplexing technology to multi-mode,
OM5 was developed. Now, we're going to introduce short wavelength division multiplexing so that
we can get some of those great features that we have in single mode. Now, we can use them
in multi-mode. So, OM5 is our newest fiber optic cable. Its jacket color is lime green. It's fully
compatible with OM3 and OM4. It uses a wide range of wavelengths between 850 nanometers and 953
nanometers. It's designed to support short wavelength division multiplexing, which allows
us to get 40 to 100 gigabits over a single fiber. Single mode cable provides 50 times more the
distance than multi-mode cable does. It's typically used in high bandwidth applications and long-haul
networks, especially telecommunications and data centers. Here we have OS1 and OS2. Remember,
this is optical single mode fiber versions 1 and 2. We see the ITU standard nomenclature. We see
the application, one indoor, one outdoor. We see the attenuation per kilometer. Take a look at that.
OS2 has almost half the attenuation per kilometer than OS1. The distance, you can see definitely
a difference in distance. Price goes with the territory. Inside the data centers, we'll see a
lot of OS1. Outside the data centers, we'll see a lot of OS2. A quick review of fiber jacket colors
based on the type of cable that we have. OM1 and 2 is going to be orange jacket. OM3 and 4 is aqua,
unless we're dealing with OM4 plus, is going to be a violet. And then OS1 and OS2 is yellow.
Now, since we're on the subject of jacket colors, there are non-standard cable colors.
Many manufacturers make fiber optic cables in non-standard colors, so just be aware of that.
Also, some manufacturers will match a certain color code to the connector body and the strain
relief based on the fiber optic cable you're using. They're not, every manufacturer does not
hold to this, but some do, and it makes it real easy to locate and identify the cable
and the type of cable. If all this detail about fiber optic cables wasn't enough,
both the National Electrical Code and local building codes dictate the type of material
that makes up your jacket on your cable. Let's take a look. Plenum is an important concept for
IT professionals. Most of us work in buildings where we have hanging ceilings, and above the
hanging ceilings is a place where cables are typically run. This is where you have your air
conditioning ductwork. This is known as a plenum. If you have a false floor where you have air space
and you have cables running in that area also, that is also known as a plenum. The riser is the
vertical areas of the wall where you have cables going up from the floor to the ceiling or from
the first floor to the second floor. That is known as a riser. The National Electrical Code,
as well as local buildings code, dictate the type of jacket that has to be on your cables in order
to reside in those spaces. All network cable, whether it's Cat5, Cat6, Cat6a, or fiber optics,
all come with a certain makeup of jacket material, whether it's PVC, which is commonly used in the
workspace, or polyurethane. It could be polyvinyl difluoride, which is very flame resistant.
Depending on where you put your cables, this is fiber or twisted pair, you have to be aware of
the local fire code and National Electrical Codes as to what kind of jacket material can
go in plenums, risers, or in the workspace. If you put the wrong kind of cable in the wrong space,
the fire marshal can shut your facility down. PVC is a common jacket material, but it gives off
heavy black smoke and a toxic fume. Low smoke zero halogen cable is flame retardant and is used
between buildings, floors in a building. Optical fiber non-conductive plenum cable is almost
self-extinguishing in terms of flames. So all these are just three of the many types of jacket
material. You need to be aware of this. Most cable installers know what to put where, but too often,
someone's trying to save some money and starts throwing fiber optic or twisted pair cables in
the wrong location. It could cost you a raise, maybe your job. So I'm on a typical cable retail
website, and you can see, I can see the types of cable. I can see this is PVC, this is LSZH,
this is OFNP. That tells me the type of jacket that this fiber optic cable is made of. So I know
where that cable can go and where it can't go. Here's another retail site for fiber optic cables,
and you can see it's very plain. This is plenum rated, this is riser rated, indoor, outdoor. So
they're trying to make it as easy as possible. This is important. So this is an example of a
cable riser in a new data center. You can see it's solid concrete. All the electrical communication
and network cables run through this multi-story building. Risers provide a fire safety barrier
between the potential electrical fires and people in the building. I'll leave this chart with the
NEC code with their designations, descriptions, cable applications in the notes. You can take a
look at it. Next, connectors. Here are two, some of the most popular fiber optic connectors in
the business. SC connector. All fiber optic connectors have a lock in place. So once you
press them into their position, they lock in place. The SC connector is older. The LC connector is
without a doubt the most popular connector in fiber optics. The SC connector was developed by
Nippon Telegraph and Telephone, NTT. Remember, they all have a snap and lock connector. This
one has excellent insertion loss. It's the second most common fiber connector. If you see one
connector, that's called simplex. If you see two ganged together with a connector, that's a duplex.
If you'll notice down here, when I'm looking to purchase connectors or cables, you'll see SC to
SC cable OM4. So I know that this has an SC to SC connector on one end, SC connector on the other.
Hands down, LC connector is the most popular connector in fiber optics. It has a 1.25 millimeter
ferrule. That's the ceramic piece that protrudes out of the connector. That's what actually holds
the fiber optics. The LC has a latch design that offers a pull-proof stability. Administrators
love that feature. Here we see an LC and an SC connectors. When they're locked together,
they're sold locked together, that's called a duplex. In other words, it has both transmit
receive fiber optic cables connected and locked together. When you have a single connector and
cable, that's called a simplex. These two fiber optic connectors are legacy, but you will find
them out there in the wild. ST connector uses a bannet locking system, kind of like a BNC,
if you're familiar with that cable connector. Then you have the FC connector, which is actually
a screw on mating threads used in high vibration environments. The MU connector is very popular,
especially in dense environments where we have a lot of density in fiber optic connectors. The LSH
is another one used in telcom and DWDMs. The MU connector is square and employs that push-pull
mating mechanism. It has a great locking system. Very popular in Japan and Asia, used for SONNET,
SDH, LAN, WDM, CATV, and ATM. If you take the CompTIA Net+, you'll be forced to learn this
particular connector. It's called the MTJR connector. It has never really took off. It's
got a lot of high insertion loss, and it's avoided by many equipment manufacturers. So it's there,
be aware of it. You may be tested on it, but you probably won't see it used very often.
The newest kid on the block is the CS connector by Synco. It's half the size of an LC connector.
Remember, that's real popular. It's designed for the next gen 200, 400 gig transceivers,
which I'll talk about both of those. And you can see on the bottom left, you can see the comparison
between the LC connector and the CS connector. We'll see whether it gains traction in the data
center world. Time will tell. Keeping the ferrule or the tip of the fiber optic connector clean
is a very important feature. That brings us to the E2000 connector. It has an integrated spring
loaded shutter. It just kind of falls right over the top of the ferrule, protects it from dirt,
dust, and scratches. This is liked in the industry, especially in single mode. It has a very
low return loss of over 0.1 dB and is one of the lowest in the industry. Data centers are driving
for more fiber optic density, and that's where these two connectors come in. The MTP and the MPO
fiber connectors allow up to 24 fiber optic connections made with one connector. As you look
closely at the face of this connector, this is an MPO, multiple fiber push-on connector. MPO and
MTP, although MTP was made by a different manufacturer, they are compatible. They're
all about fiber density. They commonly have either 12 fibers or 24 fiber arrays in each plug. The
next generation connector will have 16 to 32 fiber arrays. This will be required for 400 gigabits.
Each MPO connector is either male with pins or female without pins to ensure alignment of the
fiber and faces during mating. Also notice there's a key up portion of the connector. MPO and MTP
connectors can be used in many, many ways. One is you can create a straight-through cable where pin
1 goes to pin 1, pin 2 goes to pin 2. This is often used on patch base. And remember, you're
bringing 12 to 24 fibers at one time. Another typical use for the MPO is a crossover cable,
pin 1 to pin 12, pin 2 to pin 11. This is typically used on switches, transceivers,
and other electronic gear. Now there are other methods of using these cables, but these are two
of the most important. Often you want to take an MPO connector and break it out into individual
fibers. So if you look at this little cassette, it's a 1U rack cassette, and basically you put
your MPU plug on the rear of the cassette, and you can see how the top has been lifted off,
and you can see all the fiber strands have been exposed, mated to an LC connector in the front.
Surely, Mr. Vanderpool, we've learned everything we ever need to know about fiber optic cables.
No, not quite. The fiber connector tips, or the ferrule, you can see in the picture, I've got
different ceramic tips that protrude out of the connector. These are called ferrules. There are
more than one type. So we have the PC, or the physical contact ferrule, and it's slightly
beveled and polished. The next one is the UPC, the ultra-physical contact. It is more polished.
It gives a better contact, less loss of light. Then the one that is used often in single-mode
fiber optics is the angled physical contact. It has an eight-degree bevel. When choosing fiber
optic cables, not only do you have to have the right jacket, the right jacket material,
what fire code does it meet, what type of cable is it, what type of connector, but you also need
to know how the ferrule is designed. Connectors have different ferrule designs. That's the two
ceramic pieces that butt up together during the connection. The PC connector allows them to meet,
and the end faces are polished to be slightly curved or spherical. This eliminates air gap
and forces the fibers into contact. Lower optical return loss and back reflection is about negative
40 dB. This diagram carefully exaggerates the problem that the ferrule design is supposed to
solve. Notice the gap interval between the two fiber optic connectors. Obviously, that's quite
a distance and that's exaggerated, but it gives you the idea that the engineers are facing. If
there's any gap at all, there's going to be light loss and less light go down the existing connector
that's butted up against it. So, this is the problem that they're facing. These ferrule designs
are to address these problems. This diagram really helps you understand the challenge that electrical
and optical engineers face as they design connectors for the optical systems. You can
see the very first connector where the laser transmitter is sending the light. We've already
talked about the loss of the signal as it goes down the fiber, and then when it hits that first
connector, boom, you can see a drastic loss of light and a continuation of loss as it goes down.
But look at the arrow that goes back. This is reflected light back to the transmitter. It's
going to interfere with the existing signal. It's going to distort it. Then after the connector,
we see the light going down to the last connector where the receiver is, and again, we see reflection
going back. And then look, when it hits the middle connector, we see the second return of light back.
This is going to compound our degradation of the signal as we get in past this first connector.
The design of these connectors is no easy task for these engineers. UPC ferrule connectors are the
most popular in network switches and data communication. The end faces are given an
extended polishing for a better surface finish. Back reflection is reduced even more to about
negative 55 dB. The APC fiber connector or ferrule connector is the latest technology. It's called
the angled physical contact connector. The end faces are still curved and polished, but they're
angled at about an eight degree tilt. This maintains a tight connection, reduces back
reflection to about negative seven dB, which is very good. These connectors are preferred for
single mode, CATV, and HD video systems. Make sure you never mate an APC ferrule with a UPC ferrule
connector. If you do, it will cause poor performance, but most likely it's going to damage
the connectors. This is the heart of the fiber optic system in the land and in the data center.
They are called transceivers. These tiny devices are the electrical optical magic that is key to
fiber optics today. Let's take a look at the transceiver basics. Basically, we have electronic
input. It goes into a driver that drives an LED or laser, creates a series of light pulses down
the fiber optic cable. It is detected by a photo detector of some type. It's amplified and turned
back into electronic output. That's what a transceiver is going to do. Optical transceivers
are critical to local area networks and data center. It is important that you understand the
components or the specifications of optical transceivers. We're going to look at size,
electrical lanes, optical lanes, heat dissipation. This is important as we get into single mode.
Cost, and then what type of fiber does it work with? Does it work with single mode fiber or
multimode? SFP is one of the most popular form factors for transceivers. It begins by requiring
a slot, a plug and play slot that's usually mounted on a circuit board. You see these in switches,
routers, network cards, and they allow the transceiver to be inserted and connect.
Some designs allow things like optical transceivers or transceivers with an RG45 jack.
You can also find SFP slots that allow DAC or direct attach cables. These are very desirable
in low latency transmission or active optical cables, AOC. All of these can plug into a SFP
slot. Transceivers take electrical signals on one end as we plug it into the slot and they turn it
into optical signals on the other. Electrical signals like Ethernet, 10, 25, 50, and 100
gigabits per second or InfiniBand or fiber channel. The optical side is typically a variety
of infrared wavelengths or short wavelength division multiplexing. Keep in mind all data
within a computer is parallel data. That is how we're getting the computing power of a PC or a
server. But when you hit a transmission line like an optical line or a twisted pair, we have to
convert that to serial. In order to get high-speed Ethernet or high-speed optical lines, we have to
convert that parallel data to serial. And that's what serializer, deserializer ASIC chips do.
They're called SerDs. And it's functional blocks commonly used in high-speed communication to
compensate for limited input output. These ASIC chips are very expensive to develop. And in fact,
you'll look at this transceiver. It requires four of these running at 28 gigabits per second in order
to produce an optical fiber line of 112 gigs. The greatest limitation for optical fiber transmission
is the electronics, not the optical. Let's walk through the build of the newest fiber transceiver.
It's a 100BASE-SR-QFSP28 transceiver. It's one of the latest greatest. So, this is the inside of an
optical transceiver. And remember, we're looking at only the transceiver portion of an optical
transceiver. There's also a receiver in there. So, you see the electrical contacts. We're assuming
there's the ASIC chip that does the serializing, deserializing. Connected to the ASIC chips are the
laser diodes. They're going to create our nanometer wavelengths. Next is the cooling mechanism to cool
the laser diodes to maintain stable wavelength light transmission. This is very important,
especially in single mode. Next to the lasers are the lenses that are going to focus the light in
the direction of the fiber cable. Next, we're going to use those lenses to tune precise wavelengths,
which are critical in the optical transmission. After the lenses, we're going to put an optical
multiplexer. This optical assembly is not only going to do the multiplexing, but it's also going
to remove all unwanted wavelengths so only the most precise wavelengths are going out. So,
optical transceivers have both transmitters and receivers. So now, this is the receiver.
Light is coming into the receiver. Now, the optical light is going to go into our optical
demultiplexer assembly. And this is going to have mirrors that reflect light and send certain
wavelengths to colored filters, which will allow only prescribed wavelengths to pass. We'll now
focus that demultiplexed light. That light is now sent to pin diodes that transmit, translate light
into electrical signals. We finally send that into an amplifier and it goes out the printed
circuit board. This is a great block diagram of what's taking place in the latest, greatest
transceivers that are available today. Based on the designs that you just saw, these are some of
the receivers that are on the market today. Some of these transceivers run over $2,000 each. Let's
look at these three transceivers and better understand why the diversity that we see here.
At the top, we have 40 gig transceivers with a OM4 cable between them and they're using LC
connectors. And you can see that's pretty much the same down with all three transceivers. In the
middle, we have 100 gig transceivers. And at the very bottom, we have a 100 gig transceiver.
At the top, let's look at the top. 10 gigs coming in on each side. We're taking, remember, we have
to do this serialize, deserialize. Those ASIC chips are very expensive. The lower the speed,
the less expensive they are. And so a lot of times, 40 gigs is a choice, reduces the cost
of the transceiver. If I want higher speeds, such as in the center, then I have to bump up my ASIC
chips inside. One of my problems with that is I get higher power requirements, more heat dissipation.
So 425 gig electrical lines converted into optical lines can be pricey in terms of heat
and wattage dissipation. So here you see at the bottom, we've kind of gotten rid of those four
and we went to 250 gigs. The trouble is the ASIC chips to do that are more expensive. We're
probably using less power, less wattage dissipation, but the price goes up. It is common to
use high bandwidth transceivers to break out into many lower bandwidth transceivers. So on the left,
you see a transceiver that has an NPO connector and it's a hundred gigs. Let's say that's a
switch port. And I'm actually taking a cable called a breakout cable to four LC connectors,
and I'm going into 25 gig transceivers. Say each of those are going into servers. Our classical
use of optical transceivers and fiber in a local area network is to uplink one switch to another,
as you see in this picture. So where is optical fiber going? Where's the future?
The IEEE is not able to produce standards fast enough for the industry and the speed that they
desire. So you're seeing pop up groups like the Optical Internetworking Forum. This is a group
of industry people who are developing agreements between themselves to advance optical networking.
Right now we're seeing 100 to 600 coherent laser modulator driver receivers that are being
developed today. Here's an example of that technology, and you can actually see its size
against a year.