-Ferro Rod Techniques from a Green Beret _ Gray Bearded Green Beret.

The Gray Bearded Green Beret
5 followers
4 Video Views·Nov 20, 2022
Now you notice that every single time I do that the actual point of origin for those sparks
is wherever I place that rod. So by not moving this knife my sparks are going to originate from
that edge down to my tinder bundle. So I just move this to orient it over the tinder bundle
wherever I need to to get my sparks to land on the actual tinder to accept that spark.
Hey everybody this is Josh here the Gray Bearded Green Beret. Just wanted to
revisit something that I have not done a video on for several years. I think the last time I
did dedicated videos on using ferro rods was a few years ago. And yeah so I think because it's
been so long since I've talked about that I kind of revisit that for the benefit of everyone and
really how to process tinder resources for that matter. Because really you know the ferro rod is
one thing it's an ignition source but if you don't have an actual properly processed fuel
resource a tinder resource to accept the heat from that doesn't matter what technique you use
you need more experience over here. So I want to kind of talk about both of those
in this and revisit that and give you all the tools you need in your toolbox to know everything
there is to know about ferrocerium rods. Ferrocerium rods also known as ferro rods
they work by these are made of pyrophoric metals iron being one of them cerium being another as
well as probably about depending on which one you have you know anywhere it's around four percent
magnesium. So pyrophoric metals inside here you take a harder scraper in this case we're using
a steel scraper to remove that pyrophoric metal off of there that rapid oxidation happens you get
that spark and if there's proper tinder to accept that spark you're going to be able to achieve
an actual fire and then of course you've got to have the rest of the fire train going you've got
to have your your your tinder to your kindling to your sustaining fuel and all that but this
part I want to focus on just the ferro rod and you know I'm not primarily a youtuber uh even though
I do enjoy doing videos on this platform I'm primarily a physical instructor so I teach
physical classes across the United States and and really help people develop their
wilderness skills and enjoy themselves with their families out in the wilderness that's
my primary focus so the only way for me to teach out of a position of experience is by being
experienced so I have a lot of research and development a lot of time a lot of effort goes
into making sure I know exactly what I'm talking about and I know a variety of different rods
because I don't know what a student's going to show up with at one of my courses whatever they
show up with is my responsibility as a professional instructor to get them successful with the
I think that the consistency the softness of these are the best ones that are on the market
and they also have some smaller rods from light my fire which I think are probably the best small
rods out there but they're very very different rods and I'm going to show you why that matters
here in just a second now there are also four different techniques for using a ferro rod that
I want to go over with you and the one that you choose depends on two things really it depends on
what type of ferro rod you're using it's like a really good set of wind chimes what type of
ferro rod you're using and also the tinder that you're trying to use to accept the spark from this
so the first technique is what I call the pin and pull method this is my preferred technique
this is where I get the you know the rule that I've said since the beginning when I started
making these videos is you know if it takes you more than three strikes with a ferro rod
to get your tinder lit there's something either wrong with your technique or there's something
wrong with your tinder and you need to address one or both of those rather than sit there and
waste the resource because there is a technique involved in this and you know I like larger
ferro rods I like about a half inch or so as far as diameter I like them to be five to six inches
long because that gives me the most efficient removal of material with every single stroke
these come with you know supplied strikers to me that's a backup striker I like to use the actual
spine of my knife not the edge because the edge will dull over time if you do that I like to use
the spine of my knife the point of leverage on the knife based on where I'm holding it is right up
here close to the handle all right that's where it's strongest that's where I'm going to get the
most pressure that's what I'm going to get when I need out here you get a little bit of flex in the
knife it relies on your grip strength a little more point of leverage is right here orientation
is blade away from me on the rod what I'll do with that is pin that striker in this case my knife
tilt the blade angle forward and I'm going to take the actual ferro rod in this case this is
a hexa this is a hexagonal ferro rod that I like still half inch diameter still five inch really
like this it's got a nice flat surface on it which is what you'll achieve after you've used
the ferro rod like one of these for a long period of time you'll get that flat surf
you'll get that flat surface and you can really scrape off a lot of that pyrophoric metal
dump it into your tender now for the pin and pull technique I pin the striker in this case the knife
get my purchase up here at the point of leverage not out here point of leverage and I'm going to
pull the rod without moving the striker now you notice that every single time I do that the actual
point of origin for those sparks is wherever I place that rod so by not moving this striker not
moving this knife my strip my sparks are going to originate from that edge down to my tender bundle
so I just move this to orient it over the tender bundle wherever I need to to get my sparks to land
on the actual tender to accept that spark so that's the hexa I'm getting around let me do a
little landscaping here that's with the hexa all those sparks are going exactly where I want them
to go down onto the tender and they're burning for quite an extended period of time right there
that's what I want I don't want this you know kind of limp-wristed nonsense here pin it friction
pull I do the same thing if I'm using the I believe this is a kraftig five inch pin pull
nice and controlled in the winter time I like to go with this eight inch same thing eight inch
ferro rod but I can get more material with each stroke and it's a lot easier to use with gloved
hands and that stuff that's still sparking still burning on the ground that's going to be happening
inside your tender bundle if your tender bundles process correctly it's going to work and then you
have this little fatty that I like to keep because it's a little bit shorter but it fits inside my
belt pouch a lot better so I like that one as well now this rod is a little softer consistency
than the other uberliebens I carry but there is technique to that that you need to know
so pin and pull technique with the larger uberliebens that's the best way to go softer rod
larger ferro rod big tender bundle to accept that that's the best method to use the most efficient
again if it takes you more than three strikes with this there's something wrong with your technique
or there's something wrong with your tender and you need to fix one or both of those before you
continue to waste that resource let's talk about fatwood fatwood is a natural tender fatwood can
be found in a variety of different conifers I'm typically finding in pines but I've also found it
in cypress down in Florida depends on what area of the country you're in fatwood is a natural tender
that you can use to easily accept the spark using the pin and pull method your basic tender bundle
incorporates three different sizes of material you've got coarse you've got medium and you've got
fine material that's your baseline that's your basic tender bundle and when processed properly
you'll be able to get that lit within one to three strikes with a ferro rod every single time
on the other hand if it's dam or marginal tender then I recommend that you add some sort of wet
weather tender like fatwood that's a natural tender that works well when wet place it in the
center of your tender bundle that will accept the spark a lot easier and then once that's burning
that will dry out the rest of that damp marginal tender and get it going here are two examples of
bundles that are made of straight tulip poplar bark it's straight tulip poplar straight inner
bark tender the first is pretty coarsely processed it really doesn't have enough medium material and
it really doesn't have any fine material it's mostly coarse so it's poorly processed I'm still
able to get it within three strikes it's just I could have got it within one had I taken the time
to process that correctly the second example is the same material it's tulip poplar bark again
but it's properly processed no fatwood no birch bark no flash tender nothing one strike on natural
tender properly processed using the pin and pull method you may be thinking everything you've shown
is in dry conditions what about when it's wet outside well going back to what I said if it's
wet outside add a wet weather tender to that basic tender bundle just understand that when it's wet
outside your conditions are not exactly that great as far as getting that one to three strike rule
but if you process your tender properly you'll still be able to do it most likely but it may take
you three strikes instead of one because the conditions are damp so what I recommend you do
is add that fatwood to the bundle that basic bundle and then start your fire when that fatwood
is burning or that birch bark if that's what you have depending on what area you're in
that fatwood or that birch bark will burn long enough to dry the surrounding tender in your
tender bundle out and catch and then you'll get your your your actual ignition started
with your ferrocerium rod same thing goes with wet conditions like snow covered conditions you
know I typically use the pin and pull method with natural tender like a birch bark like the
birch cone that I teach in my winter skills when I'm up in the northeast having a lot of experience
with a variety of different tenders is extremely important because when I'm in wet conditions I'm
going to look for fatwood because it's a wet weather tender when I'm in snow covered conditions
I'm going to look for birch bark because birch bark is another wet weather tender that will burn
when wet so it's a it's more a knowledge of tender how they react to different ignition
sources and how to properly process them to accept the heat from the ignition source you're using
that's more important a lot of times than the actual technique the other reason that I prefer
the pin and pull technique is the primary way that I teach that directly translates to
one-handed ferrocerium rod techniques for the injured survivor and if we're talking about
survival techniques and we're considering ourselves survival instructors and teaching
skills that are valuable in a survival situation then we have to think about contingencies we have
to think about one of the main reasons someone may be in that situation to begin with is because
they're injured you know so being limited to a technique that requires both hands and not being
useful for that injured survivor that only has one one arm to use is not the best way to go about it
there's different techniques there's different ways to use them the burden is on the professional
instructor to look at all the different techniques find the value find the applicability
for a person before he dismisses them here on youtube and during my courses I teach several
different methods of one-handed techniques for the injured survivor because it's a plausible
contingency that really needs to be addressed it needs to be practiced before it's needed
a10
the a10 brings me back to a happy place one-handed techniques for an injured survivor is a plausible
scenario it's a plausible situation that needs to be practiced before it's needed
and you know that's something that my students have no problem duplicating as well one of three
strikes with a ferro rod with one hand that's really one of the reasons that I really like
the carbon garberg it has the exposed tang that that exposed butt on the end with the 90 degree
that's great for processing tenor but it's also great but it's also great for striking a ferro
rod with one hand that's why when I designed the gb2 puko I incorporated that because I thought
that was such an outstanding feature for this particular scenario got a little sunshine now
I almost want to move go soak up some sun but we'll keep dragging on all right so what about
these smaller rods right this these smaller rods tend to be a harder composition so I like to use
a different technique with these I like to use the thumb assist technique right and that is one
where I'll actually use the supplied striker and when you look at these strikers you need to look
and find where that burr is because there is a right way in a wrong way to handle these you can
hold them a different way and the burr is not there it'll just kind of slide along the ferro
rod without gripping in but it does have a burr there is a certain way to hold it on most of
these so check yours but what I like about the thumb assist technique these are smaller rods
you know so I'm trying to only use the very end of it you know probably like that last
quarter of an inch at the most with the thumb assist technique hold the striker get your purchase
right there get that point right at the very end sorry right at the very end same way I'm angling
a knife but I'm putting it right there and I'm using my thumb to put downward pressure I'm
pushing down on that to really get it to bite in and then I'm flicking that to kind of direct
sparks not a lot of sparks compared to these larger ones but I think of these larger ones
as kind of a shotgun blast and these smaller ones are kind of a sniper rifle all right this is a
precise placement of sparks onto a specialty tender like a pile of fatwood or a pile of
birch bark shavings or something to that effect a some charred material you know something that's
a small target I'm going to use something like this if I have it but that's what it's best for
now can you use this type of small rod using the pin and pull technique of course you can
it's just with each strike even if I'm using the entire surface of this smaller
ferro rod with each strike I'm not going to remove as much material as I will if I'm using
a larger rod like this one so yes you can still pin that striker and pull
and get sparks but that is not as much sparks compared to one of these larger ones
where I pin and pull so think of these as your shotgun blast with a lot of sparks hitting a
general basic tender bundle and think of these as the sniper rifle that hits that precise
small target inside a basic tender bundle so again pin and pull method large ferro rod
softer composition medium composition it's best for that think of this as the shotgun blast on a
big ball of tender a big bundle of tender little guys harder composition I like to use the thumb
assist method and this is best for hitting that little target this is the shotgun this is the
rifle let's talk feather sticks really quick there's really three reasons uh that I can think
of that you need a feather stick for one is in wet conditions you can do what's called a one stick
fire and basically you're getting to you know you're taking a larger piece of fuel and it's
wet on the outside so you're processing that down further so that you can get sonic booms
so you process it down further so you can get to the dry wood on the inside and typically if you
have wet conditions like that sometimes it can be difficult to find dry natural tender even though
typically where I'm at I don't have any problem it's always up underneath the trees it's up off
the ground it's being wind swept but you can create tender from a kindling resource like this
small stick what you're doing is taking your knife and you're feathering it up to kind of increase
the surface area and make it more coarse medium and fine so that it's it's an acceptable tender
resource so you're you're basically using it to get to the wet wood in the center and you're taking
that larger fuel resource that kindling resource and processing it down to where it's a suitable
tender so that's one reason second reason is you don't have any really other natural tender resource
that you can use like an inner bark or an outer bark or dried grasses and flower tops or you know
something to that effect so maybe that's not abundant in your area so you're creating tender
from kindling resources using feather sticks so that's really the other reason the third reason
that I see most often is you know it's it's a display of knife skill so you're you're you're
doing it for an instagram post okay and I do agree that it is a display of knife skill because it
does show control it shows that you know how to you know manipulate wood follow ridges and produce
suitable tender from a less than suitable piece of kindling so and this is a small example I like to
use larger ones so I can get longer curls but the key component of a feather stick if you're going
to use it as a tender is you have to create fine enough curls that'll easily accept the ignition
source honestly a a feather stick the best ignition method for that is a lighter same it's
more of an open flame tender resource in my opinion especially if you're really trying to get
a fire going really quickly you're going to quickly make out a non-instagram worthy feather stick and
you're going to hit that with open flame get your fire going typically one is not enough you need
probably about three stacked together that's the way I do it but if as far as display of knife
skills go and you could use a lighter you could use matches you could use something like that but
an open flame ignition source is what these are best used for doesn't mean that you can't do it
with a ferro rod and you know as far as students go and as far as the teaching point of it is and
as far as you know using this for knife skills during wilderness skills I teach basic knife
skills using the tri-stick when they do the tri-stick they make feathers and those feathers
need to be suitable enough you know kind of the test of those feathers and kind of the test of
that skill uh as far as a knife skill is whether or not you can make these feathers suitable to
accept a spark from a ferrocerium rod even though that's not the best way to light them uh it's it's
it's a test of skill kind of thing so uh typically when I make a feather stick off of my tri-stick
when I'm doing my my round reduction or my square reduction I'll take the time to actually practice
my feathers and then I'll test those feathers with a ferro rod because that's really what a
tri-stick is is practice so I've even gotten these to the point to where you can light
you know feathers with a ferrocerium rod that are still green so it can be done
and that's really a good test of your knife skills but if you can't get your feathers lit
fairly easily within one to three strikes with a ferrocerium rod then you're probably
not very good at feather sticking and you need to work on that now let's talk about the third
technique and I save this one for last because I really don't teach this one I think this is
probably the least efficient uh method of doing it I think it's the most wasteful of this resource
and I really only teach it as a way to help that beginner that novice that doesn't really have a
lot of experience help him get a little bit of success right off the bat as he's developing
the skill as he or she is developing the skill you know to actually process tender well and
actually develop that single technique to where they can get that bundle lit within one to three
strikes so I call it the push and pray technique basically I only break this out when someone's
struggling maybe they're struggling with their technique their processing of tender or in
conditions where it's it's a damp tender I've also used this but this is actually a good technique
for that damp tender when you don't have a wet weather tender to use it's a good way to kind of
dry out the tender in that particular area where you're hitting it with the sparks so that it can
actually catch and then that heat from that will actually dry out the tender next to it and kind of
start that chain reaction so it does have its place but I think it's the I think it's probably
the the most wasteful of the resource and the less least desirable technique that I like to see
so for the push and pray technique really what you're doing is you're you're making up for good
technique good tender choice good processing of tender but you know sometimes this is what
you're down to so with that technique you know you kind of pin the rod to your tender and you
just kind of go rapidly back and forth and I'm creating a lot of heat in that area but I'm also
wasting a lot of this resource because I'm trying to overcome poor tender processing or poor tender
choice and actually and a little bit of poor technique but I can overcome that by just
blasting it with heat right here but I'm wasting a lot of that resource you know it would be if I
process this properly added a little wet weather tender a little knowledge of tender resources and
processing I could easily hit that slow and controlled and get that marginal tender going
but if somebody's really struggling what I'm going to do is show them this technique
and then after they get some success with that fire then we'll talk about you know tender choices
tender processing get them a little more experience but I like to have people have
success so that's a good technique for that we'll also use that technique in feather sticks in the
past the latest feather stick video I did feather sticks and ferro rods actually show where you pin
that to the feather stick and actually use that technique to get it lit so that is a technique
but again that's not my preferred that's not the way I show people to use it unless they're really
struggling and I need to kind of throw the training wheels on if you will the fourth technique I call
the I remember what it's called that's how much I use it I only teach it in the context of what not
to do this is the pin and push method is what I call it that's where you pin the tender down
and you push your striker towards the tender the reason that I teach that only in the context of
what not to do is because if I'm pushing this forward if my tender bundle is here as soon as I
hit that tender bundle I'm either going to knock it away and scatter it or I'm going to smash the
tender bundle heat fuel and air the fire triangle if I smash that tender bundle I've taken away the
air and it's less ready to accept the heat from that ignition source so I don't want to smash
the tender bundle I don't want to smash the start of any tiny flame which I've seen students do time
and time again using that technique they'll get a little bit of a flame that starts and then they
hit it with the striker and it smashes it out it's just not the best way to do it another thing that
I see people do is bang their knuckles all the time if they're putting it on an anvil like a
stump or something that affects so pin and push technique I only teach that in the context in the
context of what not to do so with that said grab your ferro rods there's no such thing as advanced
techniques there's only brilliance in the basics grab your ferro rods head out to the forest with
your family this weekend enjoy yourself make some fires practice those techniques figure out what
kind of ferro rod you have whether it's hard whether it's soft which technique is the best for
each practice with different resources practice with a bunch of different tenders so you no matter
what you have in front of you at the time when you need to make that fire you'll know exactly
what to do there's no substitute for actual experience get outside take your family enjoy
yourself hope to see you in the woods
