Dollar Tree Fabric Cross Wreath | DIY Rag Cross Wreath with Dollar Tree Cross Wreath

A Well Purposed Woman
308 followers
This tutorial will show you step by step how to make a fabric cross rag wreath. This fabric cross wreath could not be easier to make and it is the perfect wreath to make for Easter. This is a great way to use up extra fabric you might have on hand.
What supplies do I need to make a fabric cross wreath?
-14" Wire Cross Wreath Form
-2-3 Yards of Fabric
-Scissors
-Ruler
-Twine
-Easter Embellishments
#diywreath #fabricwreath #ragwreath #crosswreath #wreath #wreathdesign #easter #easterwreath #dollartree #dollartreediy #dollartreeeaster #diyeaster
welcome back to a wellp purpose women
I'm Elizabeth and today we're going to
be making this beautiful fabric cross
wreath for Easter if it's your first
time joining us thank you so much for
being here and don't forget to hit that
little red subscribe button down below
and you'll be sure to get future videos
but let's get started on making this
beautiful wreath the supplies we're
going to need are also listed down
below
so to get started I'm going to take my
cross wreath here from the Dollar Tree
and I'm going to take my fabric I have
about three yards of this nice cream
colored fabric it's a sturdy fabric
doesn't stretch a lot it's probably
similar somewhat to a duck cotton or um
maybe even like a linen but we're going
to start first by cutting our fabric
into 1 in by 8 in strips so I'm going to
take my scissors and just make a cut
every inch to about an inch and a half
um and just I have my fabric kind of
folded so we're going to do it on the
folded Edge and then I'm just going to
take my scissors and run it down um the
length of the fabric making these longer
1in strips and I'm going to make a bunch
of those and you can use a scissors like
I am if you find it easier to use a
cutting mat with a rotary cutter of
course that is also an option but either
way we're just going to cut um a bunch
of the 1in strips and you don't have to
cut more than what you need you can just
kind of cut as you go so that you're not
using more fabric than you need um
because once we have these cut we're
going to start tying them onto the
wreath and then you'll get a better idea
of how much fabric you're going to need
um but once we have the 1in strips then
we're going to take our ruler here and
just measure out um around eight inches
and we're going to cut strips that are 1
in by 8 in like I mentioned so just take
your scissors and then cut that one in
strip into um the 8 inch by one strips
and I like just using a strip I've
already cut as a pattern and I just keep
cutting the strips um with uh the little
one as an
example and again just continue doing
this um you could probably do at least a
yard or two yards um right away because
this cross wreath used about um 2 yard
of my
fabric once you have a good number of
these 1 in by 8 in strips cut then we're
going to just start tying them onto the
wreath so you're going to take a strip
and just fold it in two and then you're
going to while it's still folded you're
going to put that strip underneath one
of the wire parts of the wreath and then
you're going to take the two ends of the
strip and feed it through the looped end
of the strip and just tuck those strips
inside the loop and then pull it tight
and that's all there is to making this
wreath really we're going to repeat that
over and over so I'll show you again
fold it in two put it underneath the
wire wreath and then take the ends and
feed it through the looped end so that
you're attaching the strip to the wreath
and and I'll just do it a couple more
times so that it's really super clear
but it's a very
simple process and it's just repetition
that makes the wreath look so pretty so
I'm going to do it on the
next wire and just again take the two
ends feed it through the looped end and
pull it tight and then I'll do it one
more time and I on this cross wreath I
kind of just did it this way I moved up
um the cross wreath and kind of did it
from right to laugh
so again take the strip fold it put it
underneath the wire then take the ends
and feed it through the looped and pull
tight and continue doing that and as you
can see some of these strips are not
perfect but you know what doesn't matter
it still turns out really pretty and
don't get caught up on it being perfect
cuz at first it looks kind of wonky but
as you start adding the strips and get
them f F in more then it's going to look
really pretty and this cross wreath is a
little bit different than a round wire
wreath form because it has kind of an
outer edge as well so I put fabric
strips on the outer and inner edge of
this wreath form and it turned out
really nice in the end as you're going
to see in a little bit but just keep
doing that fold your strips tuck them
underneath the wire then tuck the ends
into the loop end and then as you go
kind of push them together and that's
just going to give you a nice full
looking wreath um that can be a little
bit a matter of personal preference if
you don't have tons of fabric that
you're using you probably could create a
pretty nice wreath without making them
too tight together but if you have
enough fabric to spare then I would just
suggest pushing them close together as
they will go as you're making the wreath
cuz then you're going to get like I
mentioned a really nice and full wreath
so these corners look a little funny at
the beginning but I promise as you
continue to do it you're going to get
more of that cross shape and you're
going to be hopefully really pleased
with the end result um I'm going to
speed up the video eventually just
because I think you get the hang of it
if you want a slower version of a
tutorial I always do try to do a written
tutorial on my blog to go along with the
video so that if you prefer it to be a
little slower then you can just also
have the written instructions um on the
blog so down below in the comments
you'll find a link for that otherwise
I'm going to speed up the video because
it actually will end up taking an hour
hour and a half to finish this wreath
and really it's comes down to that
simple process of folding the fabric
after it's been cut into the strips
tucking it under the wire wreath and
then just pulling it through the looped
ends and you just repeat that over and
over again so it's a great project to do
if you're watching your favorite show if
you have on a podcast if you're driving
in the car I've even done this just cut
the strips um beforehand and carry a bag
with your wreath and you can just do it
in the car and it works great and it's a
Mindless type of thing that it doesn't
take a lot of creativity or energy to do
but in the end it turns out really nice
so let's go ahead and speed up the video
and I'll see you on the other side to
finish it off with some
embellishments okay now now we've
completely covered our cross with our
fabric strips and I'm going to take this
little wreath and this little he is
risen cut out from Hobby Lobby and we're
going to um just try a couple different
options on our cross to embellish it um
I'm going to take this antiquing wax and
I'm going to darken the heat is risen
cut out a little bit with the antiquing
wax and you can just take a rag and
you wipe that onto the cutout and that
gives it a darker look if you like the
bare wood you could also use that but I
thought a slightly darker wood would
stand out a little bit more on this
wreath so once you cover your cutout
with the wax if you're doing that then
we're just going to attach the different
embellishments onto our wreath so we're
going to start by taking some floral
wire I use this golden wire that Blended
in really well with the cream Fabric and
just fed it through the re and then
we're just going to twist the wire off
in order to hold the little wreath in
place and I did find this golden wire
Blended in really well and you was not
visible once it was attached and so I'm
going to take another piece of the wire
and just do the same thing to the other
side of this wreath and of course you
would do the same thing if you're
attaching floral pics or just some dried
flowers or something else to your wreath
um then same thing just take some floral
wire and attach it that way that's going
to give it you a little bit more um
sturdiness and it's going to hold
everything in place a little bit nicer
and once I had my little green wreath
attached then I took some burlap ribbon
and I just hot glued the he is risen
sign onto the ribbon and I found the
ribbon added a little bit more contrast
and made the he is risen cutout stand
out just a tad bit more um which is what
I was looking for and then once I had my
ribbon cut out in place I took the wire
and again just fed it through the ribbon
attached it to the greenery and then
everything was pretty well in place and
it wasn't going to move around it's not
going to come off with different um
temperatures it's going to just stay in
place so that's why I chose to use wire
versus hot glue on this
wreath I love how this is turning out
and I just used a piece of wire to tie
off the other side of that ribbon and
then I was pretty much done with this
cross wreath um I think it turned out
even better than I had imagined I hope
you liked watching this video if you did
give me a like down below and subscribe
to the channel so you can get future
videos but I love this reminder of the
real meaning of Easter what Christ has
done for us and it's a way to just
remember his love throughout the season
so I hope you enjoyed the video and I
hope you have a wonderful Easter and I
look forward to crafting together again
with you thanks so much for being
here
