Clean Your Hydration Bladder the Right Way | Gregory 3D Hydro & Most Brands
In this video I’ll show you how to clean a hydration bladder the right way so it stays fresh, mold-free, and ready for your next adventure. Using my Gregory 3D Hydro as the example, this step-by-step hydration bladder cleaning method works for most brands including CamelBak, Osprey hydration bladder, and Platypus reservoir.
You’ll learn how to deep clean the hydration bladder, properly clean the hydration tube and clean the bite valve, and dry hydration bladder completely to prevent mold hydration bladder and get rid of any plastic taste hydration bladder.
Whether you’re dealing with hydration bladder mold, want to remove mold from hydration bladder, or just need a solid routine for hydration reservoir and clean hydration pack maintenance, this guide has you covered. I also cover using a hydration bladder cleaning kit for best results and simple everyday care tips that keep your hiking gear care simple and effective.
This Gregory 3D Hydro cleaning approach applies to nearly any hydration bladder, so you can follow along no matter which brand you own.
If this helped you, leave a like and subscribe for more outdoor gear tips from Coach Helder. Drop a comment below with your favorite cleaning method or any questions you have.
Hello and welcome to my channel. Today I'm going to talk to you about cleaning my hydration bladder.
I've been asked to make this video for a while and to be honest with you every time that I
clean my hydration bladder I'm in some type of a hurry. I should have done it the night before
and I never get around to making that video because I just do not have the time at that moment.
Well today I am going to change that and I'm going to actually record the video as I'm cleaning my
hydration bladder and hopefully this information will help you to clean your own hydration bladder
and keep it nice and sanitized. Now it's the summertime here in New Jersey. The time that
I'm usually the busiest as far as being out and about and participating in as many activities as
I can and I usually have my hydration bladder with me. So I'm pretty much using it on a daily basis
whether I am hiking, rucking, on the trail with my dog, camping, cycling, going to the beach,
I mean you name it. Think about it. It holds three liters of water but now keeping that in mind the
one thing that we need to do is keep it sanitized and keep it clean. Attracting bacteria, mold,
super simple in these types of hydration bladders but it's not a big deal as long as you follow the
information that I'm going to provide in this video. Now I always stick to clean filtered water
in my hydration bladder but if you have a tendency to use let's say electrolytes or
juices or anything else other than clean filtered water because using something other than water is
going to attract that much more bacteria, that much more mold, so you really need to get in there
and clean it even more often than if you just utilize water. How often do I clean mine? Pretty
much every three weeks I would say. So if you do use those electrolytes or juices I would suggest
cleaning it that much more often. So some of the things that I'll be using in this video,
mild dish detergent, distilled vinegar, a bowl, obviously for demonstration purposes I am doing
it here makes it easier to be able to make this video but if you could use a sink, a tub, that's
definitely preferable. You will need to rinse the bladder quite often so if you are near a faucet
makes it that much better. Most likely I'm going to have to go in the house, utilize the faucet
when it comes time to let's say rinsing out the bladder as well as the other components. But for
out here I'm just going to use this little makeshift tub, a little glass or container that'll hold the
little bits like the bite down pieces and a couple of the other attachments and a cleaning
kit. I will place links to the actual things that I'm using in this specific video. All right so
let's go ahead and get started with our cleaning process. You'll see how simple it actually is and
the more simple that we could keep it the more that we're going to do it and the better that we
bode, right? Having a nice clean hydration bladder. Okay so going ahead removing the hydration bladder
from my rucksack, getting it ready to clean. Okay so I went ahead filled up about one-third
of my hydration bladder with warm water. Definitely do not use super cold water and
do not use hot water. Just a bit warm and that's all you really need for this cleaning process.
Okay from there I'm going to take my glass, add some of the distilled vinegar. Now the reason I
like using distilled vinegar is that it doesn't really retain that taste especially after you
rinse your bladder so you don't have to worry about any kind of weird taste while you're out
there on the trail and at the same time it helps to kill mold as well as bacteria. So I like to
utilize that in my cleaning process. So I have that glass and from there what I'm going to do
is just start taking the different attachments apart and as I take it apart I will drop it in
to the distilled vinegar. As I mentioned there might be some different type of attachments with
your setup so even if the components are a bit different on your setup just go ahead use your
judgment. It'll probably be different but it won't be that different. Here take this guy out drop it
in there. The other side. That's pretty much everything. Give it a good shake make sure that
everything's getting soaked in there. Now the actual hoses that I have here I'm going to put
into this container. Now once again if you are indoors you can use your sink, your bathtub,
whatever works best for you. I like to add this distilled vinegar into my hoses and just let them
soak for a while as I go ahead with the rest of the cleaning process. I want to make sure
that that's all in there. Just moving it around shaking around a little bit. Make sure that that
vinegar gets to every piece of the actual hoses and I'll go ahead and just let them rest on the
for a while with the other accessories so that they're all getting a good soak. Okay back here
to the hydration bladder. I'm gonna go ahead open it up. Once again you can tell I'm getting water
all over the place and that's because the attachments are all out but not a big deal.
It is summertime. It's hot out here. I'm outdoors. It's okay but this is the reason why I'm saying
you might want to do this indoors. Making your life a bit easier. Now from here I'm just going
to add a very small bit of mild dish detergent. Go ahead close that up and give it a good shake
and I just want to do that for about 30 seconds. Now from here the actual cleaning kit. Main
components that you're going to need. As I mentioned earlier you don't have to get this
specific one. Gregory actually makes their own and as I mentioned there are countless manufacturers
making these. So in here you have a hanger for drying. You have the hose brush. Nice and long so
it could get all the way through. You have a bigger let's say scrub brush for getting in the interior
of the bladder and there is a smaller brush which once again is ideal for getting around
little crevices. Let's say inside this actual cap down here and of course inside of all the
attachments. I'm going to go ahead now and open up the cap and begin the scrubbing process.
Okay so once again everything's really simple. What you really want to pay attention to is any
of these crevices or any of the crevices let's say on the bottom that might be an issue as far
as mold or bacteria collecting and you want to just go ahead scrub around. As I mentioned getting
those little crevices as well as every part of the bladder and these brushes are very flexible.
Allows you to work them and get into every little nook and cranny let's say. I'll go ahead and do
the cap with this bigger brush but I'll also use the smaller one a bit later. Okay that's pretty
much it as far as getting the main bladder clean and done. Okay now from here I want to go ahead
and clean the hoses and before I do that I still have the distilled vinegar in here so I'm actually
going to go indoors use the faucet in the sink making my life much easier and give these hoses
a thorough rinse. Okay so I went inside rinsed all the vinegar out of the hoses. I could have
just as well done it out here and used my garden hose. Since I'm done scrubbing the bladder I'm
going to go ahead and use the soapy water. Transfer it over so that I could use that same water
since my bladder was not that dirty or full of mold to clean the hoses. Okay so I'm going to go
ahead and get the hose brush. Get some of that soapy water on here and just go ahead and punch
through on these hoses with the brush going back and forth a few times. This bladder is not that
dirty since I clean it relatively often so I don't have to spend too much time. Obviously if you had
some issues and if you are using something else other than filtered water in your bladder
this process will probably take you a bit longer. Moving along to the longer hose. Same exact process
that I used on the shorter hose and that's pretty much it. Hoses are now done. What I'm going to do
is go back into the sink rinse these out getting the soapy water out of the actual hoses and I'm
also going to get the distilled vinegar off of these little accessories so that now we can go
ahead and clean them with the soapy water. Alright so I rinsed out my hoses. They're good to go.
They're super clean. They just need to dry. I rinsed the vinegar off the little accessories
and now what I'm going to do is just give them that little soap bath and we're going to use our
little brush here to scrub down the accessories. Okay so we'll go ahead. We have our brush. We have
our soapy water and we have our little accessories and all that you want to do is just nice and
simple. Make sure that you get that brush and all of these little holes scrubbing around.
Fairly simple. Put a little lock here. I'll move that around. Open it. Move them down to the mouth
of the bite down piece here. This one gets a lot of business out on the trail from sand and always
being in your mouth and certainly prone to bacteria so you certainly want to scrub and scrub well.
Like I say the more that you do clean it the easier it is to clean every time. If you do
take quite a while not only is it a bit disgusting and unhealthy but it's also going to take you that
much longer every time that you want to clean the bladder. Moving on to the next piece. While you are
doing these pieces make sure that you inspect. There's some o-rings in some of them so you want
to make sure that your o-rings are good to go since you already have everything apart. There's
an o-ring right there. This one's good to go. It's in good shape. So no issues. No problems. I think
that's about it. No more pieces to go. So now what I'm going to do is I'm going to go ahead and take
the bladder. Take the small attachments. Bring them inside and rinse them thoroughly in the sink
making sure that I get all the soapy water out of them. Now as far as distilled vinegar and using it
inside the bladder there are times where I definitely do that. I don't do it every time that
I clean it. I might do it every fourth time that I clean it and since the last time I cleaned it
I used some vinegar in here and just basically at this step I would have poured some vinegar in there
shaken it up for 20 to 30 seconds and then went ahead and rinsed it out. But as I stated no reason
to do that now. I would just be wasting time and vinegar. But in case you were interested that is
my standard process. So let me go ahead and get the soap off of these components. Okay so everything
is thoroughly rinsed. Be sure to take your time and really rinse this out because you don't want
that soapy taste uh bothering you and uh haunting you for many miles on the trail. Letting everything
dry here on the towel. It's very hot and humid out here so this shouldn't take too long. As far
as the actual bladder there is this hanger. You could go ahead squeeze it in there and be able to
hang it this way. Hanging that up here by the top letting the air flow inside. What's cool about this
uh Gregory model that I'm using here is that it actually has its own little hook here so you can
actually has its own little hook here so you can just go ahead open it up and
just go ahead open it up and be able to hang it this way so that the water can actually run out
be able to hang it this way so that the water can actually run out
and dry. And because of this 3D construction it also has a tendency to stay open letting the air
and dry and because of this 3d construction it
also has a tendency to stay open letting the air flow through it drying
flow through it drying it quickly. Hanging it letting it air dry is the best way to of course
it quickly hanging it letting it air dry
is the best way to of course avoid building bacteria and mold
avoid building bacteria and mold getting all of that moisture out of there. So it's a good idea
getting all of that moisture out of there so it's a good idea to hang it
to hang it done with your hike or done with your activity. Empty out the water hang it let it dry
done with your hike or done with your activity
empty out the water hang it let it dry thoroughly and i am ready
thoroughly and I am ready for my next adventure. If you are enjoying the information in this video
for my next adventure if you are enjoying
the information in this video i appreciate it if you go ahead
I appreciate it if you go ahead like comment subscribe all that good stuff. It'll allow me
like comment subscribe all that good stuff
it'll allow me to keep doing what i'm doing and bringing this type of
to keep doing what I'm doing and bringing this type of information to you. So that's about it.
information to you so that's about it not that
Not that difficult of a process so hopefully I'll entice you to do this much more often. Helping to
difficult of a process so hopefully i'll entice you to do
this much more often helping to keep your
keep your hydration bladder serviceable and also avoid you getting sick utilizing your hydration
hydration bladder serviceable and also avoid you getting sick
utilizing your hydration bladder because while you're out there enjoying
bladder. Because while you're out there enjoying your activities the last thing you want to do is
your activities the last thing you want to do is get sick
get sick or get the runs or something like that. Especially when you're out there on the trail or
or get the runs or something like that especially when you're out there on the
trail or pretty much anywhere so bottom line keep your hydration
pretty much anywhere. So bottom line keep your hydration bladder clean. Hope you enjoyed this video. ing here is that it
bladder clean hope you enjoyed this video