-Cherry Blossom Cake with Hand Piped Buttercream Flowers! _ Georgia's Cakes

You Can 2
25 followers
43 Video Views·Nov 15, 2022
Hey guys, welcome back to my channel.
Today I'm gonna show you how to make
this gorgeous cherry blossom tree cake,
complete with hand-piped buttercream flowers.
It involves various techniques,
which I'm going to talk through in detail on this tutorial.
Once again, I do apologize about the format of this video.
I still have construction work going on in my building,
but I didn't wanna miss the opportunity
to show you how I made this beautiful cake.
So as usual, I'm going to start off
by filling the cake and crumb coating.
So I baked a chocolate cake
and I also made some ganache last night.
So I always make my ganache the day before I need to use it
to ensure that it's at spreadable consistency.
The consistency that you want your ganache to be
is similar to Nutella.
If you haven't already, I highly recommend
checking out my ganache masterclass that is on my channel.
I've put the link up here for you.
So the ganache I'm using is my softer ganache
that I'm going to use to fill and stack the cake.
I usually put less ganache than I do buttercream
because it is a little bit richer,
but it's totally personal preference
how much ganache or buttercream
you usually put in between your cake layers.
Same again, same amount of ganache,
spreading it out with my palette knife.
And I don't worry about this overspill of ganache
that's happening around the outside of the cake
because I'm going to use that for my crumb coat anyway.
What I want here is an even layer in between the cake layers.
Third layer of sponge, more ganache.
Same process.
And finally, the last layer of cake.
And as always, I'm using the cake layer upside down
so I get the flattest side facing up
because that's what touched the bottom of the cake tin.
And I can take advantage of that flat surface.
So first I'm going to use this overspill of ganache
between the cake layers and spread around the cake.
Now I'm using this side to side action with the palette knife
and especially with ganache,
you don't want to remove your palette knife
from the cake when you do this.
Otherwise, crumbs get inside.
I don't need to worry about totally smoothing this layer either
because I am going over with the side scraper.
So it actually seemed like I already had enough ganache on here
to make a nice thin layer.
So all I needed was a little bit to go on top.
And I'm going to use that same rotating action
that I was doing when I was filling up the cake
to make the top nice and flat.
Once again, I'm not worrying about this overspill
because this is actually going to pack in the top corners.
Once I'm happy with the top,
I'm now going on with my side scraper.
Placing my hand towards the bottom of the side scraper
and angling it slightly towards me
to ensure I can get an even smooth coating of ganache
around the outside.
Notice how many times I'm going round as well.
And I'm not putting on more ganache.
You only need to do that
if you haven't put on enough already.
But we only want a thin layer here
because it's just the crumb coat.
And then finally, I'm going to clean off the corners
using the side of my palette knife,
ensuring that I clean the palette knife every time
otherwise I put some more ganache on top.
And crumb coat is done.
So just like buttercream,
I'm going to set this in the fridge
until it's nice and firm.
Once it's firm,
which means there's nothing coming off my fingers,
I'm gonna go on with a layer
of my Swiss meringue buttercream.
Now, because the ganache is totally cold,
it's not going to mix into the buttercream.
And so the buttercream will stay white and clean
even I'm going over this chocolate layer.
Using the back of my palette knife
and that same action as I was doing before,
side to side,
I'm going to coat this cake
with about half a centimetre thick of the Swiss meringue.
I'm keeping it white for now
because I am gonna start introducing colour
once I've completed the white layer,
making sure I'm filling every single part,
especially where the cake touches the cake board
at the bottom.
People tend to forget about that bit.
All around the top,
making sure that it's the same thickness.
And then I'm going to spoon some buttercream
on the very top of the cake
and flatten it out with the side of my palette knife
and rotating my turntable.
And once again,
I have this lovely overspill of buttercream,
which is going to help me pack in my corners
when I go around with my side scraper.
As I said, I'm going to be introducing a colour.
So I'm only gonna scrape around
to ensure that I have an even amount of buttercream
all over the cake.
I'm not gonna start perfecting
all those little air bubbles
or lines that the scraper may be causing.
So I'm going to do a rough covering now,
including cleaning up those top corners.
So what I did here
is colour about two tablespoons of buttercream,
a very light baby blue.
I'm going to dot around small amounts of this blue,
but still leaving the majority white
because colour tends to overtake the white quite quickly.
And a few blobs on the top.
And then as I did previously,
flatten out the top,
which will start blending the blue.
And I'm also going to use my side scraper
to flatten out the top even more.
So I'm just letting the weight of the scraper fall on top
and make sure there's no excess buttercream
in the centre of the cake,
which tends to happen.
Now I'm going to go around the sides again
with my side scraper and blend that blue.
And you can start to see this watercolour effect
happening quite quickly.
I go around a few times
just to see where the blue is ending up
and then go in and fill some of the gaps
where I think more blue should be.
And places that are slightly too blue,
I'll go in with some more white.
Keep going round until the edges are nice and smooth.
A couple of slower turns
to get rid of those pesky little air bubbles.
And when I'm happy with it,
rather than cleaning off the corners,
I want a really nice sharp corner to this cake.
So I'm going to freeze this
and then cut the corners off after.
So while I'm waiting for the buttercream to set,
it's time to prepare my buttercream flowers.
For this, I'm using a tip number 104 in a piping bag.
And what's important with this tip
is to know where the thin and thicker parts of the tip are.
I like to put the piping bag in a tall cup
to help me fill it.
And here I've got two shades of pink buttercream.
So with the darker buttercream,
I'm going to spoon up the sides of the piping bag like so,
and then go in with the lighter buttercream
on the other side.
So both colours will come out of the piping bag
at the same time.
And to ensure this happens,
I like patting down the buttercream flat on the surface
so I can actually see that both colours
are going to come out.
Because sometimes one colour overtakes the other
and then it takes a while for it to come out the piping bag.
And the most important thing to take note
is where the narrow part of the tip is.
Because whichever colour comes out the narrow part of the tip
is going to be on the outside of the petal.
And now that's ready to use.
But I also have, which is very important
when it comes to piping buttercream flowers,
is a piping nail and some small squares of parchment paper
so I can pipe the buttercream flowers on.
I'm going to add a little bit of buttercream
on the flower nail to secure the piece of parchment to it
and then start piping.
So once again, take note of where the thin part
of the tip is and you want that thin part facing outwards.
And as you push, you're going to go up and down
to make a petal.
So you can also see the two tones of buttercream as well,
which adds a lovely detail to these flowers.
Take the parchment off and carefully place it on the board.
And simply repeat the process until you're happy
with the amount of flowers that you've piped.
I honestly didn't know how many I was going to need
for this cake and I also really enjoy piping flowers,
so I piped quite a few.
When you've piped a few that you're happy with,
what you can do is actually twist the tip
to swap the colours.
Rather than fill a new piping bag, just twist the tip
so the thin part is now matching up with the other shade
and now the darker shade is matching up
with the thicker bit of the tip.
And you'll see when I start piping,
I now have a lighter outer edge and a darker centre,
which I think I actually preferred,
but I do like the combination of both styles
and will use both for the cake.
You'll also notice that I'm doing this shaking action
with my hand and that just creates a little wave
within each petal and adds a more realistic touch.
So I have plenty of flowers and I'm now going to place
this tray in the freezer because I want these flowers
to be as firm as possible before I put them on the cake.
Once the buttercream is totally set,
I can now get a sharp knife and cut away those top edges,
leaving a super sharp corner.
I love doing this technique,
especially when I'm not covering the top
with drips or something.
However, it may need neatening up afterwards.
So I'm just gonna go over it a couple of times
with my palette knife.
And now it's time to pipe the tree
on the outside of the cake.
So using some leftover ganache that I had
from filling up the cake, I've placed it in a piping bag
and cut a very small hole to draw the tree on.
And I like the idea of drawing this tree
coming from one corner upwards in a diagonal.
And I'm going to draw a few branches on there too
because this is where all the flowers is gonna sit.
And to balance out the design,
I'm going to put a little detail on top too
and make both trunks a little bit thicker.
Even though the ganache is setting to the cold cake,
I want to make sure it is solid because I want to dust it.
So I'm gonna put the cake in the fridge for five minutes.
So with a soft brush and some edible gold dust,
I lightly dusted the ganache to give it a slight shimmer.
So before I go on with my piped flowers,
I wanted to add some smaller details using the buttercream.
So here I've got that darker shade of pink that I was using,
cut a very small hole in the bottom of a piping bag
and started piping on small dots.
And as I pipe on more,
the illusion of this cherry blossom starts to appear.
I'll do some on the top as well
and then fill in with some white buttercream too.
As a design, this alone definitely counts
for cherry blossom,
but because I piped those beautiful flowers,
I wanted to add those on too.
So once they were out the freezer,
I can simply take one of the flowers,
peel off the parchment and place it directly onto the cake
where I piped those dots of buttercream.
I felt the buttercream firm quite quickly.
So all I did was add some extra buttercream
in places I was going to place on the piped flower
and gradually add more of these piped flowers.
And I also alternated between the darker flowers
and the lighter flowers.
I'm really happy with the way this cake is looking,
but just to add one last detail on these flowers,
I'm going to take that piping bag of buttercream
and add very small dots in the center of each flower.
And I thought this detail
really tied all the decorations together.
A few more dots of blossom in the background.
And then my final detail, of course, is some gold leaf.
This just adds yet another detail
and ties together all the decorations.
And there we go.
That is my cherry blossom cake.
I hope you enjoyed watching the process.
I hope you try it out yourself.
It's a really fun one to make.
Of course, if you do,
please tag me at georgiascakes on Instagram.
Please like this video and subscribe to my channel
so you don't miss any tutorials that I upload
and we'll see you very soon.
