How To Fix Gaps In Flooring Easily On Laminate, Vinyl (LVP) Engineered Floors | DIY Tips and Tricks!

You Can 2
25 followers
358 Video Views·Oct 23, 2022
Hi friends, welcome back to another episode of Fix This House. On today's
episode I'm going to be showing you four tips and tricks on how you can fix
gaps on your floating floors such as vinyl plank flooring,
laminate flooring, or even engineered wood type flooring.
So I want you to stay tuned. So thank you for tuning in once again. I'm Jay from
Fix This House. If you're new to the channel please consider pressing the
subscribe and notification bell so you can always be in tune on DIYs,
how-to videos, and product reviews that I do within this channel.
Today I'm going to be showing you some four tips and tricks on how we can fix
these gaps on my vinyl plank flooring. So this is actually one of my kids rooms.
They do a lot of running around here, sliding, jumping, they ride their toy cars
here and there. So eventually over time it's going to start
shifting because it is a floating floor. There is the first gap that we want to
try to close right there. Before we actually show you that first
step I want you to clean out the gap right here. So because over time
you're going to have a build-up that's going to be going here.
Dirt is going to start accumulating in these cracks.
So what you're going to do is going to try what I'm going to be using are these
toothpicks. I like using toothpicks because if you
use some type of metal like I don't know like a screwdriver or
some kind of knife there's a chance that you might
scratch up your floor. But with a wooden pick or like this you
can easily just you know dig out the dirt and grind
between the flooring and you don't risk damaging your floor or
scratching it. Start vacuuming the cracks. The very
first tip that I want to show you guys to
try to fix this is try to use your shoes first if you have nice grippy shoes
like this to test it out. When you make
contact with the floor you can see that it doesn't slide. It has a nice grip
on the on the bottom. So make sure you have those nice type of shoes
and we're going to try to just push it and kick it out.
We're just going to kick it out forward like this and see if we can get it to
close. Sometimes these planks get so loose over
time that you can actually do this easily but
in this case you can tell that this floor has a nice
tight fit. So it does. There's actually two cracks
right here and sometimes it works sometimes it
doesn't. It might budge a little bit but yeah it doesn't hurt to try doing
this step first to save you some trouble and time.
So if that shoe trick doesn't work I want you guys to try this tip number two.
If you get one of these grip pads like what you see here
this one you can actually buy in a roll. You can grab one from your
toolbox. The one I'm getting actually comes from my toolbox.
You can just grab a piece cut a little piece of chunk like this.
This is actually where you can you know put on your
cabinets to prevent stuff from rolling around or shifting.
These are fairly cheap. Go check out in your local hardware store but I'll leave
a link on the description down below. All the tools that I use on this video
actually I'll leave it in the description down
below so you can actually access them and make it easier for you.
Okay so go grab one of these and what you're gonna go grab
is a 2x4. A little piece of wood like this. It doesn't have to be a 2x4.
Any type of wood but here I got a little spare tube
about a 12 inch 2x4 that we can use to lay down on top of this grip. So let me
show you this trick. You can see that when you put the 2x4
on top of it it doesn't shift. What we're gonna do is we're actually gonna
put some weight on the top. Just one foot should be fine.
You can put your whole body into it. One foot like this should be fine and
putting like a little bit of weight a little bit of your body weight. Put your
elbow onto it so that you can have enough room.
I highly suggest that you use a rubber mallet. Don't use just a regular hammer
because if you have a regular hammer it's made
out of steel and if you miss the floor on
tapping this you could possibly just dent your floor or possibly
make some damage on your flooring. So rubber
mallet is highly recommended so that if you do miss
you're not going to end up scratching your floor.
There you have it. Just took a couple of taps for that thing to close.
Alright so if tip number two doesn't work for you I got tip number three
which is actually my least favorite. It's because you'll know why in a bit
and that's using double-sided tape and again use your 2x4 piece. Now what
we're gonna do is we're actually gonna tape this. Again this third
tip and trick method is my least favorite. The reason being is that when
you put tape on this it's gonna it's a little hard to take
off the plank and I'll show you that in a bit.
So what you want to do is you want to take your 2x4,
get your double-sided tape and run a piece of double-sided tape
on top of that on top of that 2x4 and then just cut it just like this.
Press nice and firmly on this. Now you can use your
you can use your rubber mallet to press right well right really well on it
just like that. Now this double-sided tape is really stubborn.
Now you're actually figuring out why this is my least favorite out of all the
tips the four tips and tricks that I'm showing you.
We got actually another gap here right there that we want to
take out. So let's close this door for a sec.
You want to make sure that your surface here is clean.
So if you have like a wet rag just give it a nice wipe
so that the adhesive on this doesn't fade out.
Now that's another thing why I don't like this method that much is because
if you have plenty of if you have a bunch of these gaps right here and you
put it right here this tends to get dirty.
Given you can wipe it off with a wet rag and wait for a little bit for the
to kick back in or you have to take this off
and put another strip of double-sided tape.
It gets pretty hard to take off and you might have to end up using this little
tiny pry bar to try to pry this piece of wood off.
Sometimes the double-sided tape will stick to the floor
when you take out the wood and you might end up having to try to scrape it off
or something and while using the scraper there's a possibility that you might end
up scratching your floor with this metal scraper.
But if you have a plastic scraper that's a different story but
again it's just too much hassle but let's see if it does work.
So let's place it on top okay no movement right there.
So if you watch some of my vinyl plank flooring install videos
I use these tools a lot. I have a pull bar in this mallet.
So what we're going to do is we're going to put this pull bar on the end right
here because we don't have any room to tap
this is going to act as a hitting plate right there so we can close that off.
So what we're going to do is we're going to step on this for a little bit
and let's see if we can try to tap this gap off right here.
See that it's already starting to close boom.
Let's try to pull this piece off so as you can see
see this right when I'm starting to pull this off
though you can see that I don't know if you can see it but the vinyl plank
flooring is actually starting to lift a little bit.
Since this is a floating floor you can see that there's already movement and
let me show you what I'm talking about here.
You see that the vinyl plank flooring is starting to
move on the edge given I haven't put baseboards on this yet so don't mind
that but it's actually yeah moving along with
it because it's stuck in there. So what you're going to do is you're
going to take your mini pry bar right here and just
carefully remove it from there and just try it
you know carefully pry it off again this is
yeah this is number this is the least method that I
that I like but there you go it's actually I'm lucky it was actually
starting to peel off a little bit on this wedge right here
but it still has some tap to it and you can move on to the next one if you're
this is good if you're just going to fix one plank
but if you have multiple planks that you need to fix
I think the fourth method is the best one yet.
You might want to have a whole roll of double-sided tape if you are going to
use this method for plenty of planks but in this case if
you're just going to do one I don't mind you using just this method
right here and if you have a really close strip
right here with a six inch piece get a smaller piece of wood and do the
same concept use your pull bar like this put a little
bit of tape right here not on the whole thing but put a little
bit of strip right here and then put it on the edge right there
and then tap it on to there that's only if you have a
little small piece that's tip number three that's the least
one that I like out of all the tips but it actually is very effective
but the most effective one that I believe
is tip number four and I'll show you right now so tip number four
on fixing gaps between your vinyl flooring laminate or engineered wood
or floating floor whatever you want to call it this is my actually my favorite
one and it's using this suction tool right here this is
actually used for you know for multiple purposes you can use
this to lift up cabinets as long as it has a
clean surface and you can use this to actually
you know remove glass or carefully move glass around right here but you
can also use it for vinyl plank flooring or any flooring that has a nice
smooth surface on this case this has a nice smooth surface it might not work if
you have a profile that's a raised profile on your vinyl
plank flooring and that means that if it has the gaps on
your if you have that wooden profile texture on your flooring this
might not grip because it might have some air bubbles underneath there but
this is perfect for smooth surface laminate flooring and vinyl flooring just
like what I have here now this is so easy to use make sure you
have a nice clean surface it doesn't have to be super clean just wipe it with
your hand wipe this if it's dusty place it on the
floor and then with these levers press down on it so it has a nice suction
onto the floor and one of the ends right here all you
gotta do is use your rubber mallet and tap it in see that let me show you a
quick close-up on that closing up right there
easy closes up fast so if you have a bunch of these gaps
that you need to do in a quick amount of time
all you gotta do is suction it tap tap tap
take out the levers move and then move on to the next plank
especially once you start moving one plank the other one the other side is
gonna it's like a stair step effect a domino effect
the other side is gonna have a gap so you're gonna keep moving along the line
move on tap move on to then keep moving tap tap tap so this is actually one of
the best methods I think in my opinion that will make the job you know
go faster and efficient all right so all these
tools that I use here I'll leave in the description down below
and you go you can go check that out all right friends so that's pretty much this
whole video I hope you found value I hope this helped you out a lot
again you can use any four of these methods again if you want to try the
shoe method first there's no harm on doing that that's actually the quickest
cheapest and best way to try it out first if it
works it works but if it doesn't try out the other three methods
again best method is using the suction and this rubber mallet trick
but overall any of them work it's just depending on your liking
okay friends so I hope you found value to this if you did please hit that big
thumbs up press the subscribe button and
notification bell so you can always be in tune on DIYs how-to videos and product
reviews that I do within this channel and again thank you for tuning in I'll
see you on the next video
