CÁCH TỈA HOA CÀ RỐT CHO CÁC MÓN XÀO- NGHỆ THUẬT GÓC BẾP

NGHỆ THUẬT GÓC BẾP
45 người theo dõi
6 Lượt xem video·5 thg 10, 2023
Hello everyone, today I will introduce you to 5 simple ways to peel carrots to make stir-fried dishes.
Please watch my video.
First, I will peel the branches first.
You cut me a piece of carrot about 6cm.
You take the top part of the carrot.
Then you cut a triangle.
Here you are.
You cut a triangle like this for me.
Like this.
Let me create a triangle.
Next, you create a rhombus.
Here you are.
Stab the knife straight into here.
About 1mm.
Then you draw a line for me like this.
Here you are.
Make a rhombus like this.
Here.
Can you see my rhombus?
Look at me again.
You stab the knife straight into here about 1mm.
Then you draw a line like this.
There.
I do it slowly so you can easily follow.
Alright.
Like this.
Do the same with this side.
Here you are.
I have done both sides of the rhombus like this.
Now you...
Let me take it closer.
Now you take this knife.
Stab straight into here a square.
A straight line like that.
About 1cm.
Like this.
Then you draw a line like this to create the trunk.
Do the same with this side.
Now I have a trunk.
Here you are.
A trunk is done.
Now I will create a fan.
You cut about 1.5cm for me.
Then you divide it into a rhombus.
5 sides.
2...
3...
4...
5...
Guys.
This is a rhombus.
Here.
Next.
You take the middle point of this.
Here.
From here to here you take the middle point.
Stab about 2 lines for me.
Then you take from this side.
Draw a line for me.
Down the 2 lines here.
Like this.
Like this, guys.
Next, these wings are the same for me.
The same with the remaining wings.
Here.
Also take the middle point.
Remember that this is the middle point of this side.
This is the fan shape, guys.
I have finished the 2nd way to make a carrot.
For my 3rd way, you take a circle like this.
1.5cm thick.
You peel off this part.
And also adjust this circle to be rounder.
Because my carrot can't be round.
Adjust the big and small parts.
Adjust it for me.
Then you take the middle point.
Here.
From here to here you take the middle point of this circle.
Stab about 1 line.
Then you take a sharp knife.
A thin line.
A thin line for me.
Go down here.
Go down 1 line, guys.
Here, go down here.
Here, guys.
This is 1 line.
You divide this 1 line into this.
You cut down here.
This is 1 line for me.
Don't call it broken.
This side is the same, guys.
Here, guys.
Like this for me.
Next, you make the teeth inside.
The teeth inside are the same as a pine tree, guys.
Here.
You also stab deep into it.
And make the teeth for me.
Here.
Here, guys.
You make the teeth for me like this.
Here, guys.
I have one side.
Now I turn to make this side.
The teeth on this side are done.
Now I will make the feet.
The feet of the flower.
This is called a lotus flower, guys.
Here, guys.
Pay attention to this part.
Here.
This part is yours.
Here.
You will stab a square here.
Cut this out or it will break my teeth.
Here, guys.
Look at me.
You stab deep into it.
Not 9 to 1 mm.
Then you stab a line to make it look like the foot of a pine tree.
Here.
Like the foot of the pine tree I just showed you.
Here, guys.
The same on this side.
Let me see.
The same on this side.
Here, guys.
I will cut this corner to make it round a little bit.
It will look more beautiful and softer.
Here, guys.
Now the fourth way.
You take 1.5 mm thick of this carrot.
And you make a square for me.
Make a square for me.
I will cut off this thickness to make it a little bit tighter.
Here.
Make a square for me like this.
This is a square, guys.
Next.
You divide the length of this square to make 3 parts.
Here, I will divide it into 3 parts like this.
Make 3 parts.
Make 2 parts for me.
Make 3 parts like this.
Here.
Make 3 parts like this.
Now I will take this edge and make a diagonal line.
Down here.
Here.
Can you see it?
The same on this side.
Make a diagonal line like this.
Do the same for the other edges.
Make 3 parts like this.
Make 2 parts and make a diagonal line.
This is a diagonal line.
Make 3 parts and make a diagonal line.
Here, guys.
The same on this side.
Make a diagonal line like this.
Here.
Done.
Now the last part.
I will do the same.
So I have a flower petal, guys.
Here.
So I have a flower petal like this.
Now you take the circle of the carrot and make a rectangle for me.
This is a rectangle, guys.
Then you divide the rectangle into 3 parts like this.
Make 3 equal parts for me.
Make 3 equal parts like this.
Cut the knife into 1 to 2 pieces like this.
Then at the center of the rectangle,
you fold it down here.
You fold it down here for me.
The same on this side.
You also divide it into 3 parts.
And this is the center of this rectangle.
You fold it down here.
Like this, guys.
Then you make a rectangle like this.
On this side for me.
You insert the knife into 1 piece.
You fold it.
Insert it.
Fold it for me.
Insert it.
Fold it.
You make a rectangle.
This is a rectangle.
Like this, guys.
I will do the same on this side.
I'm making the rest here.
Also make a rectangle like the other side.
So I have a flower petal like this, guys.
So I have just introduced you to 5 ways to make a flower from a carrot.
Here is my ingredient.
I hope you will succeed in making this carrot flower
to decorate your food more attractive.
Thank you for watching the video.
See you in the next video.
Goodbye.
