Brilliant Dollar Tree Christmas Crafts You HAVE To Try!

Cheap and easy decorating tips
92 followers
In today's episode we are creating fun Christmas crafts using items you can find at your local
Dollar Tree. I hope you enjoy. For our first project we're using some of Dollar Tree's
wooden dice. They come three in a pack. Depending on how large you want to make this project I'm
going to be using all three plus an extra one that I had left over from my nativity set that
I made last year. I'll have that video linked in the description box below if you would like to
see how I created that. So in total I'll be using 10. I have mine sitting on some wax paper just to
keep the glue from getting on my work surface. I have a square and I'm going to be using some
Gorilla super glue gel but you could definitely use wood glue for this. The super glue gel just
sets up a lot faster. We're going to glue four of those together making sure we keep them in line
at the bottom. Then you're going to glue three more together and it only takes a couple of minutes
for it to get tacky so you can kind of move it around. Then we're going to take those three we're
going to be stacking it on top of those four right in the center. So we'll go ahead and add our glue
to that. Just be careful with that super glue gel you don't want to get it on your fingers because
it will definitely make your fingers stick together. Once you apply some pressure and you
kind of have that stuck together we're going to take two more glue those together attach them
to the top and then we'll take one final piece to glue to the top of those two. So if you want
to make it a little bit smaller instead of four at the bottom you could do three then two then one
but I did the four three two and one. Once that glue sets up it is very solid. Now we're going
to paint it. I'm going to be painting mine with Waverly's chalk paint in the color moss. This will
only take one coat. I'm going to make sure I get into all of the nooks and crannies and I'm going
to paint this entire piece front back and both of the sides. Once that has completely dried I'm then
going to take some white chalk paint and a dry brush because I really want to bring out the
outlines on this piece. I'm going to dry brush around all of those round portions on the front
the sides and the back and on the tops of each of the ones that are kind of sticking out. I'm going
to bring out the round part there as well as come down the sides. Then we'll set that to the side
and let that paint dry. We're going to use three of Dollar Tree's wooden stars. They come in a package
we are going to super glue these together stacking them on top of one another to make
one thick star. So it's going to look something like this. While that glue is setting up we're
using one of these pieces from Dollar Tree. It has all of the months and the dates in it. I'm going to
use my utility knife to score around the box itself. You can do this about four or five times
and then you'll easily be able to pop those pieces off. If you need to you can go back with
your utility knife to trim the remainder off to get it flush with the box itself. Then I'm going
to take some sandpaper and go around it to make sure everything's nice and smooth. I decided to
paint mine with a white chalk paint. I'm going to paint the entire piece and it will take about
three coats. In addition to painting that I'm going to paint the three stars that we glued together
making sure I also get the outside edges. We're also going to use one single wooden star out of
the package from Dollar Tree and go ahead and give it a coat of the white paint. Once everything has
dried I'm going to come back with some of that moss paint and a dry brush around the edges of
the single star to really bring out that outline. I'm also going to do that for the stars that we
glued three of them together and the box that holds the months and the days by going around
all of the edges including the sides and the back. Now I'm going to take some stickers that I found
at Hobby Lobby. They are white stickers with just a little bit of glitter on them but Dollar Tree
does carry white stickers and I'm going to place one in the center of each of our wooden blocks.
We are making a Christmas tree countdown. Now I don't have enough to go around the entire
tree so I just did the front of mine so it'll have 10 days but if you have enough stickers
you could actually do 28 out of the 31 days in December. Now we can add our star to the top the
one that we glued the three pieces together just by adding some super glue to two of the bottom
parts of the star and centering that on top of the tree so it's going to look something like this
and if you want to you can take the box with the month and days and actually use that as the tree
trunk but I'm not going to glue mine together I'm going to keep those separate. Using one of Dollar
Tree's adhesive glue dots I'm going to place that on the back of the single star and you can use
that as your countdown on your tree. Those adhesive dots come off fairly easily and they
won't pull the paint or your stickers up so you'll easily be able to move this each day.
In Dollar Tree you can find chip brushes but you can also find a pack of three at Dollar General
for $3.75 and they are three different sizes. For the two smaller sizes I'm going to be painting
the handles with Waverly's chalk paint in the color crimson red but of course you could use
an acrylic paint if you like. It did take two coats to cover up the wording that's on the
wooden handles so you may want to use some sandpaper to try to remove most of that before
you paint and you could probably get by with just one coat. For the larger brush I'm going to paint
the entire handle with Waverly's chalk paint in the color moss and you don't have to be too
meticulous around the metal portion because we are going to cover that. Once the paint is dry I'm
going to take an oil-based sharpie in the color white and for the smallest brush I started off
by using the ruler but then I just free-handed some lines going across the top of it to create
like a candy cane design. Bring that down on both sides of the paintbrush and for the other red one
I'm going to take that and just make some squiggly lines at the bottom at the top and then some in
the middle just get creative with it and draw whatever you like on there. For the largest one
I decided to just put a ton of polka dots all over it then we'll set those to the side and let that
dry. In Dollar Tree you can find a bag of assorted colored and shaped pom-poms as well as assorted
sized googly eyes. Now you could take just the googly eyes I'm going to take the smallest ones
and use those but I decided to cut the plastic piece off of each one of those and just have that
black dot that's on the inside. I cut six of those out and then using my oil-based sharpie just put
some white dots inside of that to create the eyes. I have a leftover piece of the microfiber cloth
that you would find in the automotive section at Dollar Tree. You'll want to cut the width big
enough so that you'll be able to wrap the metal portion of the paintbrush and thin enough that
you'll have a little bit of the metal exposed at the bottom. We're going to attach that using some
hot glue and wrap it around on the back side overlapping each other. I'll do that for all
three of the paintbrushes. Now we can attach the eyes using hot glue to the exposed metal piece.
Because the eyes are so tiny I did find that it was a lot easier to pick these up and attach them
using some tweezers and I could avoid burning the ends of my fingers. So we're going to add
two to each of the paintbrushes and then we're going to add a pom-pom right there at the metal
piece where the bristles are. I added a white one to the green handle and a red one to the other two
red handles. Then this is optional but I decided to create a hanger using some twine by folding
that in half and fitting it through the hole at the handle of the paintbrush. Pull that down
and then tie a knot at the end and I'll do that for all three of these and this is how they turned
out. I would love to know what you guys think. For this project we're using three different sized
wood slices. You can find wood slices at Dollar Tree however you can find a very large assorted
bag at Hobby Lobby for around six dollars and you get a lot more for your money especially if you
can catch them when they're half off. I'm going to take the two smaller pieces and give those two
coats of a white acrylic paint on that center circle and then I'll let those dry. Then we're
going to glue the smaller one to the medium sized one and then once your glue sets up flip it over
because we're going to take one of Dollar Tree's jumbo craft sticks trim that down and hot glue it
to the two pieces to reinforce it so that they will stay together. I'm using a pair of baby socks
that you can find at Dollar Tree. We're going to set one to the side for right now. The first one
we're going to roll up to create a cuff and this will become our snowman hat. So we're going to
pull that down on the sides add a little bit of glue to each side and then for the front I'm going
to add the glue almost to the top of the wood slice and then kind of frame the snowman's face
by gluing it sort of like a semi-circle. Then we'll flip it over to the back and add some more hot glue
Using some brown and white twine that I found at Dollar Tree I'm going to tie that at the top of
the sock there but before I tie a knot I'm going to pull some of that down to make it look more
full right there at the face then I can go ahead tie my knot and cut my excess twine off. To make
like a pom-pom at the top of the hat just make quite a few cuts and if you need to you can trim
it down a little bit shorter. I'm going to place some glue to make sure that cuff stays in place
and then just keep trimming it up until you have it looking the way you want it.
Then using a pencil I'll go ahead and draw out the face. In addition to the white acrylic paint I'm
going to be using a black paint and a spice pumpkin. I'm going to fill in the eyes with the
black paint and then paint the nose. Once that dries I'll go back with some white paint to
highlight the eyes and then take a fine tip sharpie to create the eyebrows the outline of
the eyes as well as some eyelashes. Then I can create the detail and the outline around the nose
add a few lines all the way across the carrot nose and then fill in the mouth. Using the other sock
we're going to create a scarf. We're going to cut it on the back side right there where the heel is
spread that out then we can cut the heel portion off. Because this is pretty stretchy this will be
long enough for us to stretch over and create the scarf. So I'm going to glue that down on one side
and then pull the other side up under it and then really stretch it and glue that side down and then
I can go back and add some glue under the shorter side. Dollar Tree carries a mini jar of buttons
and I've actually had this for a few years now so you get quite a few and they are assorted colors
and sizes. So I picked out two small gray ones to kind of coordinate with the hat and scarf. Now we
can set this on top of the third wood slice. To hold it in place I'm going to add some hot glue.
To reinforce it I'm going to use two of Dollar Tree's wooden blocks to glue on the wood slice
as well as the back part of the snowman and if you want to cover that up you could just add a
little bit of greenery to it. For this project we're going to use one of Dollar Tree's wood round signs
it measures approximately 11 and 3 quarters of an inch. I'm going to remove the hanger and add a
layer of Mod Podge making sure that I spread this evenly all the way across and bringing it to the
edges because we're going to be covering this with some beautiful scrapbook paper from Hobby Lobby.
I'm going to place that down on the wood round spread it out and because this paper is really
thick I decided to go ahead and take a piece of parchment paper and my mini iron to go over it
to really make sure that the edges seal so that that paper does not peel up later on
and because it's so thick I decided to trim the excess off with my utility knife
because if I was using sandpaper it would take a really long time. I'll be using some Dollar Tree
nautical rope and because it's a new roll I'm going to remove the tape off the end cut that at
an angle and then to make sure it doesn't unravel I'll take a little bit of hot glue to hold those
pieces together this is going to help it blend a little bit more seamless around the piece. I'm
going to glue this around the entire outside of the sign and I like to do this in small sections
to make sure that I can pull that rope tight and everything stays in place. The other end I'm going
to cut that angle in the opposite direction glue that end and then I can glue it to the first end
and it just looks a little bit better than if you cut them straight across. I found this beautiful
wooden star sign at Dollar Tree in their crafter's square section. I'm going to add some antique wax
to some water to water that down to create a lighter colored stain and paint the entire front
part of this sign and because it's kind of watery it's going to run through the back
so once I flip that over before I add my stain to the back side I'm going to take
two of Dollar Tree's wooden blocks to glue to the center on the back side of the star.
You just want to make sure they're the same size so that when you flip it over it will lay even.
I'm going to continue to add that antique wax to the entire back part of the star as well as those
wooden blocks and again because it's runny I'm going to make sure I turn it over to the front
and spread that out evenly and make sure it has a beautiful coverage. We're also using a wooden
nativity craft set that you can find at Dollar Tree. We only need Mary, Joseph, and baby Jesus.
Using my handheld miter shears I'm going to trim that bottom piece off where the craft kit goes
together on all three pieces and then using some sandpaper sand over each piece to make sure it's
nice and smooth. I'm going to be painting each one of these with a ivory colored paint. This is
going to blend in nicely with our scrapbook paper and I made sure to get the edges because you will
be able to see those. On our wood round roughly find the center and make a mark with a pencil.
You just want to make sure that it is a little bit higher than the squares that you put on the
back of your star. Then drill a tiny hole through there just big enough to feed some of these Dollar
Tree LED lights with the very thin lights and wires on it. Because it has two wires I'm going
to twist each of these to make sure that they'll stay together. Then we can take the end of our
lights and feed it through the back. Pull it all the way through until it gets to the thick portion
of the wire. Then we're going to take our star flip it over. It will be enough lights to go to each
corner and point. Pick a corner or point that's above your wooden pieces and then glue your
lights one to each of the corners and each of the points of the star. Once you have all of those
glued down go back and tighten up the wires that are running from each light. Some of those
you will have to twist a little bit to make sure they're tight enough to stay behind the star
itself. Then I added just a little bit of hot glue to make sure it stays in place and that you
won't be able to see it once you flip this over and glue the side down. Once you have all of your
wires tightened up we're going to add a very generous amount of hot glue to those two wooden
blocks. Pull our wire back through and glue our star right in the center of our wood round. Now
we can attach our nativity scene directly to the star using some hot glue. For all of this you
could use a more permanent glue rather than hot glue but if you do use hot glue don't use an
excessive amount especially when you're gluing the wires down so that you don't melt the wires
or the lights. I'm hot gluing some greenery pieces that I cut off of a pick that I already had on
hand and for some reason I thought I had pressed record but I didn't. I glued the battery pack to
the back of the sign facing upward where I would be able to change the batteries and if you wanted
to you could add a hanger to the back. If you do you'll need to glue like two of the tumbling
tower pieces stacked on top of each other so that it will balance itself out or you could just set
this up on a plate stand. I hope you enjoyed today's projects and if you have a favorite please
let me know in the comment section down below because I always love to know which one is your
favorite. If you haven't subscribed already I would love you to click that subscribe button
right below the video. Thank you so much for spending time with me today
please take care and I'll see you guys next time.
