We just posted a brand new Christmas craft tutorial. Think ornaments, decorations, and gifts that are as easy on your wallet but are nice enough to sell at a craft show!
FTC Disclaimer: This video is not sponsored. All opinions are my own. The description contains some affiliate links that I earn a small commission off of. Thanks for supporting my channel!
Hi there, thanks for joining me. I'm Elizabeth from a wellpurposewoman.com.
If it's your first time joining me, welcome and if you like our videos
remember to hit the red subscribe button down below. Today I have 10 different
Christmas craft projects for you using inexpensive items and we're going to
repurpose them into nice gift worthy presents for Christmas. So let's get
started. For this first craft we're going to be using these two MDF little
trucks that were in the craft section at the Dollar Tree and these two little
crates. So we're going to make one of those red Christmas trucks out of our
flat boards and we're going to do that by gluing these little crates in between
the two trucks. It's just about the right size but it's a little bit long
so I'm actually going to take this second little crate downstairs and cut
it off this little section with my miter saw and then I'm going to glue
those onto the trucks. You're just going to take wood glue and apply it to both
sides of your truck. You're going to have the crates in between and then you're
going to use some type of weight to hold down the entire piece. I waited about
three to four hours and then I came back around with some bright red Christmas
paint and I just covered the entire truck with red paint. I wasn't too
worried about getting the tires painted because I have a different plan of how
I'm going to cover those up but I did put painters tape on the little box end
of the truck with the little fence things that are sticking out because I
want to keep those brown but everything else I just painted with red. You can do
one to two coats. Actually after one coat this little truck was really looking
good so I put a second coat on and you want to wait a little bit in between
each coat of paint but then after the truck each of the slices with the
wax and once they were covered with kind of this rustic looking brown color my
plan was to use these on the tires so I was going to paint the overall tire
black and I used the top of my Mod Podge container to get a full circle with each
of the tires. I just used a pencil and traced around it and then I painted the
tire with black paint and then the little wood slices were going to go on
top of the black and they kind of look like a little rustic looking hubcap and
that was just going to be one of the finishing touches on the truck and I
also added these little wooden snowflakes to each of the doors of the
truck just to give it kind of the Christmas feel and here's our little
Christmas truck on display. He has a little Christmas tree in his box and he
is ready to go and my husband will probably use this for his desk at work
this Christmas. You could add the different items to the little box as
well you could use candy or Christmas floral picks or whatever you'd want but
so cute and easy for a little Christmas decoration. I should have mentioned a lot
of the things I'm using today were not necessarily in the Christmas section of
our Dollar Tree because our Christmas stuff wasn't quite out when I made this
video but one of the things I found was this little wall vase. It's made of metal
and it's kind of cute how it is but I wanted to turn this into a Christmas
decoration so I'm going to start with these decorative tiles. They are
self-adhesive tiles and I'm just going to trace the vase size onto the
little tiles and then cut it out and I'm just going to stick the tile all around
the front of this vase. Then once I had the face of the vase covered with the
decorative tile I just went over it with some paint. I wasn't sure what color
I wanted to use for my ornament so I tried a couple different options. I
started with this lighter grayish kind of white color and I wasn't quite
feeling that once it had dried even though I liked how it kind of covered up
some of the tile because we're going to eventually sand through it a little bit
to see some of that design but I thought the white was okay it just wasn't
exactly what I was looking for so I painted over the grayish white with a
black color and I actually just had some leftover chalkboard paint and I used
that on top of this gray color and that ended up being so much cuter and more of
what I was looking for. So after the paint had dried and I applied two coats
of the black chalkboard paint I just decided to take a piece of chalk and
just bring it along the surface of my vase just in case eventually I would use
it to write little messages on it maybe I was thinking I could write joy or
something for Christmas or change it for different seasons but I'm just going to
take a piece of chalk and just go over that entire surface so that if I do
later on want to use the chalkboard then I could but this also made it look kind
of cool I thought. The next step was to make the top of my ornament so I took a
little awl tool and I punched a hole through the top of the vase and then I
took my drill and then just drilled a larger hole through that little hole
that I had originally poked and this was a little tricky but it worked okay I
could tell that the quality of the vase you know was a little on the not so
great side but it was possible and it was it turned out okay I just took a
little metal cutter and just trimmed off some of the little extra metal and then
I took the jute twine I fed it through the top hole and this was going to be
kind of a hanger for my ornament I ended up hot gluing the ends in place and then
I had that little wood piece off of that little crate and I decided that was
going to be the ornament top so I hot glued that on the top and there was a
little hole already on the side from like where the handle of that little
crate was as you can see there and that was what I had used with the little
truck so this was just kind of repurposing that little junk piece into
the top of the ornament and I think it turned out super cute I did use
antiquing wax to make it a little darker and then I put a little piece of
cardboard on the underside just so you won't see the twine peeking out
and then to embellish this little ornament we're going to use some floral
picks and I had these ones with pine cones and a little glittery which I
thought fit the motif well and then I added these this little neutral kind of
neutral red neutral pink ribbon and I really liked how that played along with
the black and then I just hot glued it on to the sides and hot glued the bow
into the center of the little ornament and it kind of looked like you know a
stripe going through an ornament or something you could embellish this
however you would want to go with the colors in your home I like the neutral
ribbon I thought it looked cute with the black but again sky's the limit do what
you like and what would fit in with your home the last edition were these little
black berries that I added to the floral picks I thought I needed just a little
bit more of a pop of something and these blackberries were I thought really cute
with the black ornament so here is the final ornament it can be hung from a
hodge or a frame a doorway it's really cute I like how it turned out let me
know what you think in the comments below but I think it's a very cute
little present that you could give to a friend or family
you've been to the Dollar Tree recently you've probably seen this wooden bead
wreath in the craft section it's so cute and has tons of potential so today we're
going to turn it into a wreath for Christmas so I'm just going to dovetail
the ends of my burlap ribbon here and then I'm going to take hot glue and
attach it in the center of this wreath form make sure that where the beads meet
and are joined is in the top center of your wreath and then I'm going to hot
glue that ribbon again to the middle of the form and then I'm going to take that
neutral ribbon that I use in my last project and I'm going to just put that
along those words in the middle of the burlap ribbon just kind of creating a
double fabric look to the center of this wreath you probably saw this coming but
I'm going to take some floral picks for Christmas and I'm just going to wire
those on to this little wreath and we're going to add some Christmas flair to the
bottom of this wreath and again you can do this in different ways I've seen
people just layer floral picks on one side instead of making it asymmetric or
making it symmetrical or you can do it symmetrically which is what I'm going to
do and kind of balance out both sides to have the same look on each side and you
can add pine cones or other little embellishments and then I'm going to
take some jute twine again and tie a knot up where that little the beads are
connected on the top just to kind of hide it and then just also so that I can
hang this wreath and so I'm taking the jute and just feeding it through itself
so to speak and then I'm going to tie a knot which I will use to hang it and the
last step was just a hot glue piece on the center of the ribbon with some
scrabble letters I think it turned out so cute it was so easy to make this
wreath and I think it really would make a cute present for a friend this
Christmas
If you like snowman crafts then this next one is for you. I'm going to start with a
birch log cut out and then I'm going to take a wooden dowel and I'm going to
load up some of these styrofoam balls on the top of it to make the base of a
snowman and we're going to use some chunky yarn we're going to make a really
cute easy snowman that would be fun for kids to do or adults alike so start by
just making the frame of your snowman I tried this little scarecrow hat but I
ended up not liking it for the size of the snowman I made but I just wanted to
kind of test out what I was going to do for the base of it and once I had a plan
then I went ahead and started making my snowman and what I did first was take
the styrofoam balls and cover them with the chunky yarn we're just applying hot
glue to the styrofoam ball and then wrapping the chunky yarn around the ball
as we go and I'm going to show you another project on how you can make
chunky yarn ornaments which is pretty similar to what I'm doing with a snowman
but we're going to turn this little guy into a snowman so I'm just again hot
gluing wrapping the yarn as it go all the way around the ball and as you get
to the bottom of your snowman you're going to kind of wrap the yarn in a
circle and then just cut off any extra yarn then we're going to feed that
styrofoam ball through our dowel that we have set up and then we're going to
wrap the top ball as well with the chunky yarn and then place that on top
of our larger ball so I do have two different sizes of styrofoam balls I'm
not sure if I mentioned that this one is slightly smaller so that's going to fit
right on top of the snowman and it's going to be just a two ball snowman you
could make a three ball one as well and use three different sizes but I felt two
was plenty for this design and then once you get towards the end of your ball
again you're going to wrap the yarn in a circle and then stick the smaller ball
on top of the bigger ball and you can hot glue in between the two balls just
to make him stand up a little bit better but then we have pretty much the base of
our snowman next we're going to dress up our snowman so I like to use things that
I repurpose I have this sock in my stash that I'm going to use for his hat
so I'm just going to cut three or four inches off of the sock I'm going to put
that on his little head fold up one of the edges for the rim of the hat and
then use a little bit of twine to bunch at the top for a little ball on the top
of his head and since I'm really feeling this dusty rose color today I'm going to
use that for his scarf as well just going to wrap the ribbon around the
middle of the two balls now you can use yarn you can use ribbon you can use
anything you want to make him a little scarf you could also use fabric that you
have on hand I'm going to dovetail the edges of his little scarf and then he is
going to be almost all dressed for facing these cold Minnesota winters that
we might soon have but we'll add a couple more buttons on his midsection
and then I'm gonna hot glue underneath the rim of his hat a little bit just to
make sure that hat stays on him and then I think our snowman is dressed and we
just need to add his face and arms so I'm going to use this little set of
embellishments that I got off of Amazon actually has quite a few snowman noses
eyes hats that you can use it works really well and I'll link down below for
this kit but it actually has everything you need to make a snowman buttons hat
and arms and a nose so I'm going to use that on him for his nose and I think
he's looking pretty good right now so you can embellish him however you want
it's just a cute little way to make a snowman there's so many snowman crafts
out there I like this one because I like the fuzzy chunky yarn and I like
how cute he turns out
this next craft is very similar to the last but a totally different project
we're going to take old ornaments and update them so I'm just taking these old
gold ornaments that I had and I'm gonna take some chunky yarn and just wrap them
around the ornament and then hot glue it into place and that's as simple as this
craft is but I like how these little ornaments end up looking and it gives
your tree just a modern kind of really cute look and it's similar to kind of
doing the yarn Christmas trees if you've done those the same idea you're just
taking hot glue and chunky yarn and going around the ornament and covering
it with the yarn and it ends up looking really neutral really cool and cozy for
winter the main things to keep in mind with this craft is just to be careful
when you're hot gluing that you don't touch the hot glue with your hands you
could use gloves if you're worried about that and then the bottom of the ornament
is where you're going to finish it off nicely you're going to take the yarn and
just kind of wrap it into itself or kind of by making different circle circle
shapes with the yarn and then eventually you're going to get the yarn to end up
right in the middle of the bottom of the ornament just make a circle here and then
we're just going to cut off the extra yarn and wrap it in to the center of the
ornament and it ends up being really cute I've seen these for sale at
different stores and you can make them so simply that I love this craft this is
so cute and you can do different colors of course and different embellishments
but here's a set of three ornaments I did a mint a beige and then a cream
color they're so cute I really like how these turn out I actually do have a
craft kit available for making these as well and I'll link that down below and I
will send you everything you need to make this ornament set it's so pretty
it's really cute and cozy so I hope you like this craft as well
sometimes a Dollar Tree has really cool supplies but I'm not exactly sure how
I'm going to use them I really like this snowflake they had it's a thick MDF
board and I just thought it had a lot of potential but it didn't quite have
anything in mind or I didn't know exactly what I was going to do with it
so it was quite a feat for me to get this next project done but I started by
taking that snowflake and covering it with this really pretty Christmas paper
and again I did get that off of Amazon as well so I can link that down below I
think if you can find really pretty paper it's worth getting and this was at
a really good price this is a set of watercolor paper and I started by using
Mod Podge all across the snowflake and then just covering it with this
Christmas paper and then I just took a pair of scissors and cut around the
snowflake and I'm going to let this dry for a little bit and then we're going
to come back to it should have probably waited longer but I was pretty anxious
to get started on this project so I just started cutting around the snowflake
with my scissors to try to get off the extra gift wrap around the snowflake I
wanted to get the snowflake shape so I'm not sure if this is the best way to do
it you could probably use sandpaper or something else that might help but I
just kind of pressed the gift paper down and just tried to kind of bring out the
shape of the snowflake it took quite a bit of patience actually but eventually
I got the snowflake back down to a recognizable shape and I used just a
utility knife and a scissors to kind of trim down at that paper next we're going
to add this little joy to the world cutout I actually found that at Hobby
Lobby you could use this piece one which was from the Dollar Tree I liked both of
these options but I ended up opting for the little joy to the world cutout and
that again was from Hobby Lobby so the first thing I did just to make it stand
out a little bit was take some dark stain and I just changed the color to
this darker kind of cherry colored wood and then I added an extra little ribbon
behind the or I'm sorry in front of the burlap one just to give it a little bit
of a layered look and to help the joy to the world to stick out a tad more and
then I just hot glued the ribbon into place and then we're going to just hot
glue that little joy to the world on top and I did take a paintbrush with some
Mod Podge and I just put little Mod Podge on the tips of our snowflake and
took some fake snow and just sprinkled that over the Mod Podge just to have it
have more of the glittery look as a last step then I just added some floral picks
to the bottom of the joy to the world sign and then these little pine cones
hot glued them into place and that was all for this little snowflake sign I did
take some wood glue and I painted it on the snowflake underneath where it met
the frame and then I just set a pumpkin on top for a wait until that hot or the
wood glue had hardened so here's our little sign it turned out really cute I
was really stumped on this one I actually prayed in the middle of the
project because I didn't know how to finish it off and I think it ended up
really cute I did add these little ivory beads also to each of the tips of
the snowflake just to accentuate that each point and I love all this turns out
it's gonna be a cute gift for one of my friends or family this Christmas
this next project we're going to be making a cute little round sign for our
door and again I didn't have any of the actual Christmas signs from the Dollar
Tree so I used this one from fall just the back side of it I started by filling
the little holes on the top and then painting three quarters of one of the
sides with just some acrylic white paint just use painters tape to make a line on
it and then I just did two coats of white on one side and we're gonna
transform this into a Christmas sign for our door so once the white paint had
dried then I just removed the painters tape I took some cardstock that was red
and white striped and I measured out one half of the round and I just cut it
down to size and then I took some Mod Podge and added that on the back side of
my cardstock and I put way too much Mod Podge on there so I definitely had to
remove some of that and then we're just going to cover up half of the sign with
the red and white stripes and we're gonna turn it into a cute little entryway
sign and these are some of my favorite ones to do with the Dollar Tree rounds
they're so easy and they're modern and cute and they look great on your front
door or inside your entryway next I just took some of this upholstery webbing
it's kind of like a ribbon that I like that looks rustic and then some of this
joy ribbon and I just centered the round sign with the ribbon then I took this
black platter I had found it at Hobby Lobby for 49 cents and I applied e6000
all around the edges and then I'm gonna just press this round down I did just
hold it in place overnight with a weight and then we're going to add some floral
picks and a ribbon so I'm going to show you an easy way to make a quick ribbon
start by measuring two strips that are 14 inches long so we're gonna do that
first and then we're gonna do a third strip that's 12 inches so I'm gonna slow
down for a second just to show you how to make a bow in case you're not sure
how to do this I'll show you the step-by-step so start with those two
14 inch pieces and then cut a third piece that is 12 inches and then we're
just going to take that 12 inch piece and we are gonna hot glue the two ends
together and then we're going to turn it in to a pretty bow for our door sign
next we're going to take one of those 14 inch pieces and we're going to do the
same thing we're going to hot glue it end to end so we have two looped pieces
of the ribbon one that's 12 inches and one that's 14 inches and we're going to
take the 14 inch loop and put that on the bottom and then add the 12 inch loop
to the top and we're gonna press it together in the center and you can
already see how the bow comes together this is such an easy way to make a bow
and it's really pretty and adds a lot to wreaths or signs or whatever you're
working on even presents it would be very pretty so I hot glued that 12 inch
piece to the 14 inch piece and now we're just gonna bunch the center up and in
order to do that you can use wire or you could use even another piece of ribbon
and just create a little bow with these two pieces of ribbon and then we're
going to attach the 14 inch piece underneath those two so that's going to
be the tails of our ribbon so I'm going to take the ends of my ribbon here and
just dovetail them so fold the ribbon in half and then cutting perpendicular from
the bottom corner you just cut up and then you come with these two little
triangles on each of the sides of the ribbon that's called dovetailing and it
makes a really pretty finished look to your ribbon and I just put a little wire
on the three ribbons together to hold it in place and then I'm going to use a
little piece of wire and feed it through that middle ribbon which I used to cover
up the wire underneath and we're going to wrap it around our floral pick and
that will be just perfect for our sign you can just kind of fuss around with it
until you get the bow exactly how you want it once you have it in place and
you're just going to attach it to the sign and then the last one of the last
steps then was to add a hanger to the back side of our round so I took some
E6000 and jute twine and pressed it down onto the wood frame but then I also took
hot glue and some burlap and I put that on top of the jute just to extra
reinforce the hanger and then just press that down again so that it was a
nice solid hanger on the back and then I turn it around and I thought that white
spot needed something so I put some snowflakes on top and then I added this
joy ribbon to the center of the sign and I thought with the snowflakes on the one
side I didn't want to add any words or anything on top and so I thought this
ribbon that had words on it was cute already saying joy on it so I put that
in the center of the sign but you could definitely add a word where I put the
snowflakes instead and use that white space to put joy to the world or Noel or
whatever you want for Christmas Merry Christmas you could write on there I did
something a little different because I added the words in the center with the
ribbon and then just put the white snowflakes on the side where you maybe
would typically see a word but that was all and I love how it turned out it's so
cute it's really pretty I'm excited to display this for Christmas so simple so
inexpensive and beautiful I hope you like it let me know in the comments
below
next craft is a perfect craft Christmas card or I'm gonna start with this
wooden round from a dollar tree and I have some gift wrap paper that is I
think really gorgeous the same stuff I used on the snowflake again I got that
off of Amazon at a really discounted price and I'll link it down below
hopefully they still have some but it's a watercolor Christmas paper and I just
thought it was so pretty anyways we're gonna use this to cover up our wood
slice ornament and you could use a greeting card with a really pretty
Christmas image or you could use some vintage music sheets I'm using this gift
wrap paper and I'm just gonna cover the wood piece of it and we're gonna make it
look as if this is kind of like a winter scene on our ornament and I'm just going
to take some Mod Podge and attach that gift wrap paper to the wooden round and
I'm doing that I'm gonna do that on both sides so I did it on the front here and
then I also cut out another image for the back side and then just did the same
process of putting the Mod Podge on the wood slice and then on top of the image
and I just found where the hole was in my ornament and poked a hole in the
paper then I took a birch log and I just peeled off some of the birch bark from
the log and I'm just gonna hot glue that around the edge of this ornament I
actually saw an ornament kind of similar in a local floral shop and I thought
hmm that would be an easy thing to DIY so I think this little birch bark will
add a cute little dimension to these you could even put that on before you do the
images so that it could even hide a little bit better underneath the images
I didn't mind that it was a little rough looking I thought it was kind of cute so
I just lined the outer edge of the ornament with the birch then I just
embellished the ornament a little bit I used again the Mod Podge and some fake
snow just to add a little sparkle to the ornament and give it a little bit extra
dimension on the outer edge and then the last thing I did was attach a little
raffia bow to the top of the ornament and then some floral greens on the side
of the ornament with a little pine cone
I have seen a variation of this craft before but we're gonna take six clothes
pins of three different kinds so we're gonna use a regular size a mini one and
then a miniature size one and we're gonna take six of each sizes and then
we're going to just start by removing the metal section that binds the clothes
pin together so that we have just the two different wooden I guess pieces of
the clothes pin and we're gonna set the metal clips aside because we're not
gonna be using those today but we will use all these little wooden pieces so
I'm just gonna separate six of each of the sizes and then we're going to put
these together to make a vintage looking snowflake and this is a really fun craft
this is fun for kids and adults both today I'm going to be doing it with hot
glue so if you did this with a child you wouldn't have to use the hot glue
you could use just a gorilla glue or something craft glue wood glue that
wouldn't be so hot and dangerous with kids but since I'm doing it myself I'm
just gonna use a hot glue to show you how to do this again just start by
removing all those metal clips on each of the different sizes of clothes pins
once all the metal clips were taken off then I just started to stain all these
wooden pieces now this step is not necessary it's actually an optional step
but I went with a darker colored look for the my snowflake today you could
just start doing this project without staining your wood pieces but I wanted
to add a little bit of a darker look for mine so I added just some antiquing wax
to each one of my wood pieces and once I had all of the wood pieces stained or
darker then I started attaching the snowflake together
once you have the right color for your snowflake then we're just gonna glue
two pieces of each of the sizes together so you're gonna stick with the same size
and you're gonna glue two together back to back on the longer edge of your
clothespin so you're going to kind of turn them flip them on their back and
then just hot glue those flat sides together and you'll have a little piece
that looks like these ones and you're gonna do six of each of the sizes so
just hot glue both ends together and then once we have all the different
sizes then we're gonna assemble our snowflake so to assemble my snowflake I
took a one inch round piece of this little wood slice and I put hot glue all
over it and then I laid my snowflake out on my table and then I just pressed the
wood piece down onto the largest pieces of the clothespins and then the goal was
to hopefully keep the shape that I had selected and then we're gonna flip it
over and attach the smaller spokes of the clothespin you wouldn't have to do
it this way you could just start by attaching them one at a time but I don't
know I thought this would work fine so I did this for the larger side of the
snowflakes and then like I said I just flipped it over and then I had kind of
the base size of our base of my snowflake and then I took the next size
clothespin and I just put those in between each of the larger spokes of the
clothespins and filled in the in-between spots and then I did the same thing
again with the smallest spokes of the clothespins
This craft is a pretty simple one you probably have seen these Christmas tree cutouts at
the Dollar Tree and there's lots of ways to dress them up. Today we're going to be
covering this Christmas tree with a sweater and I have this tree stand
upright so I'm going to take some wood glue I'm going to rub it on this scrap
piece of wood and I'm going to attach that on one of the sides of this little
wooden Christmas tree and that's going to be the base that helps our little
tree to stand up. I also just took a couple little nails and I'm going to
tack down that little wood scrap piece on the tree. Now the one thing I should
have done at the beginning before I started this project was to break off
the little bottom trunk of the tree because that's going to look funny with
this extra wood stake coming out of it so I did end up breaking that off later
on but I would recommend doing it before you attach it to this wood stake. Now
we're going to take our sweater this is actually a blanket that we no longer use
and it's so pretty I wanted to use it for a special craft so I just started by
cutting around my Christmas tree and I'm going to just use my hot glue gun and my
scissors and I'm going to glue the tree down onto the sweater material and then
I'm going to cut about a half inch to an inch out of this of the tree on the
sweater and then just fold the sweater material onto the Christmas tree and use
some hot glue to attach it so I'm going to just do that all the way around the
tree. Now once the one side was completely covered with the sweater
material I just put some polyfill over that little wooden scrap piece and I
hot glued it into place just so that my tree would be soft and then on top of
the polyfill I'm just going to do another layer of the sweater on the
other side so I kind of use a scrap piece here but I just cut it down to
fill in all the parts of the tree that we're showing so that you have the
sweater material on both sides of your tree and you could definitely add
embellishments to this tree I kept it pretty simple and I liked how it looked
I added the little wooden star on top of it but I kept it just the sweater
material and it's simple and cute cozy and really nice for your Christmas
decor. I hope you like these crafts and let me know in the comments below if
there's something you would do differently or which one you like the
best or if you'll be trying any of them this year for Christmas otherwise thank
you so much for making it to the end of the video thank you for watching I hope
that you'll stick around by hitting that little red subscribe button so we can
keep in touch and that you don't miss any future videos but otherwise happy
crafting and Merry Christmas!