Audi A3/S3 8P | How To Remove Glovebox

MotoAdventuresYT
21 followers
3 Video Views·Dec 2, 2022
Thank you for watching this video and i hope it helps you in the future to do your own projects.
Please Subscribe for more videos on this amazing car, as well as modification reviews and much more.
Please follow my Instagram below....
https://www.instagram.com/motoadventureyt/?hl=en
Car:
Audi A3 8P - 1.8 TFSI
Modifications Video | Coming Soon....
Huge Thanks to Reuben for doing the camera work!
Hey guys, how's it going? Today I'm going to be doing a how-to video on how to remove the glovebox
from an Audi A3 or S3 8P. It most likely will be the same design on some other Audis as well for
some other different models. But yeah, I hope you guys enjoy the video. My own particular reason for
removing the glovebox as well is my heater has been making a couple of little squealing sounds
when it's on and as well as when you turn the ignition on. So hopefully I can have a look at
that and maybe hopefully fix it. But yeah, I hope you guys enjoy the video and I hope it helps you
if you need to take your glovebox out in the future. Okay so the first thing you want to do
is open up the glovebox like so. I do recommend if you turn off your airbag as well while you're at
it just in case anything did happen. And your first bolt you want to take out of the glovebox
will be right at the back here and it is an eight millimeter socket. So if you get your ratchet
and just with an extension bar and just unscrew that back one there.
So there you go. So you want to keep all your nuts safe so put them all aside. And the second one,
well three up here along the top of the glovebox. Now you don't need an extension bar or anything
for this it's just straight forward eight millimeter bolts. So then your last one at the end
there's your last one at the top and then. So now you just need to take this panel off which is
easy enough just to get your finger right at this edge here and all you're holding it on
is just clips. So as you can see it's just three clips and it's very easy to just come off you just
pull it off. And from here there'll be an eight millimeter screw that'll be right in there.
So just take that one out.
So again keep your all your screws to a side and don't lose any. And the next one will be
underneath the glovebox. So to get to these you have to go right under and there'll be two
eight millimeter bolts that are under here as well. So there's one underneath here as well.
So from this point you'll notice that the glovebox is now starting to drop.
So if you just keep hold of it open the glovebox.
There you go it's just a little clip there. So that's your glovebox out.
So as you can see from behind the glovebox you can see this is a heater fan. So if you ever need to
replace the heater it's here as well as if you need to replace any of the bulbs that are inside
the glovebox as well as the airbag switch which is also here. Okay so put the glovebox back in
you just want to push the cable out the way like so. Just so it doesn't get caught or in the way
of anything. And then you see these little clips on the glovebox you just want to line it up and
so there'll be holes that also line up with these clips. So if you just get it in place. A bit tricky.
There we go that's it there. So if you open up the glovebox try your best to
get one of the screws in while you're holding the glovebox up. And which one I'm going to go for is
the side one so that way I can hold my left side up. So there you go you just need a couple of
threads just to hold it up. So that's the left side already held up now and then you want to
grab the glovebox again and get another one of these top ones in. So once you get one in the
rest is pretty simple you just have to go around the glovebox putting all the screws back in
you've already taken out. So once you get all three of these in you want to lift the glovebox back up
and you want to get the ones underneath in. But make sure you're only using the silver bolts for
the outside of the glovebox because the one that's actually inside at the back
is actually painted black. So if you get these in the bottom now this is for the left side.
Okay now for the last screw will be at the back of the glovebox inside which is just below your
glovebox interior lights. So once you've done put all your bolts in by hand with your socket
you want to grab your ratchet and go around the glovebox and just tighten up
all the little 8mm bolts that hold the glovebox in.
Make sure you get the side one as well there we go and then once you get that side one in you
put your panel back on. So if you just push it in and then once you do with the clips you just
line them up and just tap them in very simply go back in there and then you want to close the
glovebox and just go underneath just make sure these are tight and there you go. That's how you
remove and put your glovebox back in on now the A3 or S3.
