Ancient Roman temple architecture the basics

Ancient Art
10 followers
23 Video Views·Mar 11, 2026
Regina Haggo outlines the most important characteristics of a typical Roman temple from the 1st century BC to the 3rd century AD. This video is part of Taking the Mystery out of Art History, a series introducing significant styles, movements, subjects and artistic works.
Most surviving Roman temples were built between the 1st century BC and the 3rd century AD.
They are found in Rome and throughout the Roman Empire.
A Roman temple could be dedicated to a god or goddess,
or an emperor, or members of the imperial family.
We will be looking at a typical Roman temple.
Our typical temple is made up of characteristics found in many, but not all, Roman temples.
A typical Roman temple sits on a high rectangular base or podium.
There is a flight of steps at the front, on one of the shorter sides.
On this plan, the steps are represented as a series of vertical lines on the right.
A deep porch is situated just above the steps.
Behind the porch there is a cella, that is, a room that extends to the back.
On this plan, thick black lines represent the outer walls of the cella.
The cella occupies almost the whole width of the temple.
It housed the statue of the deity to whom the temple was dedicated, and maybe an altar or two.
Columns run along all four sides.
In this plan, the columns are represented by black circles.
There are usually four or six columns on the front.
Some of the columns are freestanding, others are not.
The freestanding columns in this plan comprise four at the front
and two columns immediately behind the front corner columns.
The rest of the columns are attached to the wall of the cella.
These are sometimes called engaged columns.
When all the columns are freestanding, the arrangement is called peripteral.
But when some of the columns are freestanding and others are attached to a wall,
this arrangement is called pseudo-peripteral.
The columns and cella walls support a horizontal entablature
and a pitched roof with a triangular pediment at the front and back.
The columns attached to the cella wall are more decorative than supporting.
The interior of the cella is free of any supporting members,
Roman architects aimed for spacious interiors.
A typical Roman temple might look at first glance like a typical Greek temple in two ways.
First, in both Roman and Greek temples, columns support a continuous horizontal entablature,
as in this Roman temple and in this Greek one.
So both have trabeated construction,
that is, one in which horizontals are supported by verticals.
The columns and entablature support a pitched roof.
Second, a typical Roman temple like this one looks like a Greek temple
when the columns are the same orders as those found in Greek temples.
Columns can be labelled according to their orders or styles.
The two most common Greek orders are Doric and Ionic.
Romans used Ionic columns and sometimes Doric ones.
Vitruvius, who lived in the late 1st century BC,
was a Roman architect who wrote about historical and contemporary architecture.
Vitruvius said a Doric column reminded him of a sturdy and plain man.
He said an Ionic column looked like a woman because it was fancier.
But Romans liked variety in everything,
so they also used other orders, like the Corinthian column, for example.
The Greeks had used Corinthian columns, but the Romans loved them a lot.
Corinthian columns are decorative like Ionic, but more so.
Ionic capitals have fancy volutes, which look like a partly unrolled scroll.
The capital of a Corinthian column looks more organic,
like a big leafy acanthus plant struggling to get out of a basket.
The Romans also liked composite columns.
These had capitals that looked like a mix of Ionic and Corinthian,
a leafy-looking plant and a fancy scroll volute on top of it.
There are two major differences between a typical Roman temple and a typical Greek one.
One, in a Greek temple like this one, all the columns are freestanding,
so a typical Greek temple is peripteral.
In a typical Roman temple, by contrast, the columns are pseudo-peripteral,
that is, some are freestanding, others are attached to the kela wall.
A second difference between Greek and Roman has to do with an entrance.
In a typical Greek temple, no one architectural part dominates at the expense of another.
From the outside, there is no obvious front or back.
The kela is situated in the centre of the plan.
A typical Roman temple, by contrast, has an emphatic entrance consisting of a flight of steps
which lead to a deep porch which leads to the kela at the back.
Having an obvious entrance provides information about where things are in a building,
but it means that the temple front dominates at the expense of the other parts.
When it came to choosing building materials, the Romans often used what was locally available.
Kela walls are constructed of big blocks of tufa or travertine stone,
laying courses on mortar beds.
Columns are stone, the roof is wood.
The temple base is concrete.
Concrete is made by mixing lime mortar with rubble.
Concrete structures can be faced with brick, as it is here, or marble or travertine.
Concrete is strong and durable, relatively cheap and fire-resistant,
and concrete can be manipulated to fit any shape.
So concrete allowed the Romans to experiment with unique architectural shapes,
such as curved walls, arches, barrel vaults and cross or groin vaults,
and circular buildings topped with domes.
We can apply the characteristics of the typical Roman temple
to a first-century BC temple in Rome,
dedicated to the goddess Fortuna Virilis or the god Portunus.
This is a pseudo-peripteral temple with trabeated construction,
ionic columns and an obvious front comprising steps and a deep porch
that leads to a kela that extends all the way to the back.
And the base of this temple is constructed of concrete.
