A Flattening Sled Was the Wrong Tool For This Job!

Newman Specials Woodwork
1 Video View·Nov 17, 2026

Join me as I dive into my latest woodworking adventure where I attempt to cut precise miters for a box using a trim router and a 90-degree V-bit on my flattening sled. Despite my best efforts, the project has some unexpected results that led to failure! Watch the journey of trial and error, learn from my mistakes, and see how i was able to move forward.

Did you like this video? Let me know if the comments if you would like to see more like this.

This is the 90 degree Amana bit number RC-1142 from ToolsToday
Here is the link to purchase theflattening jigs used here: https://newmanspecials.com/collections/frontpage

Chapters
00:00 Introduction to the idea of cutting the grid for the box
00:40 Setting up my system
02:53 First and second issues and first vertical cuts.
05:04 Horizontal cuts and issues
07:02 Initial thoughts from experiment
07:28 Glue up with BoosDog Wood glue
09:27 Thoughts on the 90 degree v-bit experiment



Affiliate links
My website: https://newmanspecials.com/

Etsy: https://www.etsy.com/shop/NewmanSpecials

Amazon storefront: https://www.amazon.com/shop/newmanspecialswoodwork

MicroJig Affiliate: https://www.microjig.com/all?sca_ref=2666960.EmkJGjsjoW

Aeon Laser Affiliate link: https://aeonlaser.us/promos?ref=NewmanSpecials

Melbourne Tool Company Affiliate: https://aeonlaser.us/promos?ref=NewmanSpecials

Carveco CNC software affiliate link: https://carv.eco/4cQ4Jy4

xTool lasers affiliate link: https://social.xtool.com/3MYruUA

15% off RockRooster boots - https://rockroosterfootwear.com/?ref=llc0suxmum

15% off Uneeda sanders with code Newman15 - Uneeda sanders -Newman15 for 15% off

10% off Ridge Carbide blades with code Newman10 - https://shorturl.at/SYBLe