7 Japanese Tools That Are Small but Seriously Impressive!

The Tech Toolbox
1 follower
In this video, I’m checking out a selection of Japanese-made hand tools and compact workshop essentials that caught my eye.
From precision calipers to a clever pocket adjustable wrench and a versatile wire stripper, this haul is all about smart design, practical features, and the attention to detail that makes Japanese tools so enjoyable to use.
Chapters:
0:00 Intro
0:28 Tajima VARIX Knife
1:58 Engineer NS-04 Flush Cutters
3:16 Engineer PH-55 Combination Scissors
4:59 Shinwa Sokutei Calipers
6:09 Shinwa Sokutei 150mm Rule
7:40 Lobster UM24SS Pocket Wrench
9:21: Vessel 3500E-5 Wire Strippers
10:56 Final Thoughts / Summary
#machine #tools #Powertools
AI Generated·May contain errors
Hey guys, back again with another quick video,
today I've got 7 interesting
Japanese made tools to show you,
with the exception of one tool which isn't
technically Japanese made, however I'll explain why I've included it,
and some of these tools are seriously compact.
We've got a tiny adjustable wrench,
we also have these small Shinwa calipers
which only weigh 6g, as well as some pretty interesting cutting tools,
so let's take
a closer look.
OK so first up here we have the Tajima Verix folding knife.
Now this goes by the model number DKFKMU
and this is actually designed and
engineered in Japan, however it's assembled in China
so technically not a Japanese
made tool, however I thought I'd include it as it's quite unique.
It's designed mainly for electricians,
as you can see here we have a sheepsfoot
style blade, this is a hollow ground hard
chrome plated blade and it's ideal for
opening electrical cable sheathing, it's got a very sharp tip.
And you can also grip up with this knurling
on the top of the blade to get some extra
leverage and power when you're trying to slice those cables.
So you can see the model number here on the blade which is the DK-FKMU.
This also has a non-slip elastomer style grip
which is really nice to hold in the hand
and it feels like that's not going
to move around as you're cutting something.
You also have this 17mm and 21mm wrench hole
or open sockets which are handy for tightening
some nuts or bolts on site just as a temporary measure.
This blade fixes in position when it's open
and locked so to disengage the lock on this,
you press down on this liner lock.
Which allows the blade to fold back
within the housing of the knife.
You also have this lanyard hole down the base,
which obviously means you can clip on
either a small carabiner or a lanyard
to make it easier to carry.
So this feels like a really sturdy knife.
It actually weighs 188 grams or 6.4 ounces.
So as far as knives go, it is actually very heavy duty.
But I feel like that's one of the things I like about it.
It feels really nice and weighty in the hand
and it feels really well made.
So this should stand the test of time.
Okay so next up here we have the Small Engineer NS04 Micro Nippers.
Here is the packaging,
if you want to pause the video you can see the specs on this.
Obviously a lot of it is Japanese
so you might need to translate some of that but I'll do my
best to explain the features.
Now these are obviously very small and compact,
they're great for doing work on small electronics,
PCB work or other hobbies and crafts.
They have these heat treated steel
or carbon steel cutting edges and it also has this
adjustable jaw opening limiter to reduce unnecessary hand movement.
So in its current position when this is as high as it can go,
These open to the max and then
when you slide this down you can obviously have those opening
or limited to a certain opening dimension as you please
which is a nice feature as well.
So as you can see you have some nice moulded grips on this.
These are ESD safe and they are oil resistant as well.
These are also made from a thermoplastic elastomer style material.
And for the cutting capacity,
you can cut up to 2.6mm of solid copper wire,
for stranded copper wire up to 3.6mm squared
and for standard brass wire up to 2mm as well.
Obviously these fit in the hand really well,
very comfortable, I like the fact that they're
spring assisted and being so small and compact,
they're handy to throw in a tool pouch or a tool
bag or simply slip in your pocket as well.
So next up here we have another tool from Engineer
these are the PH55 GT combination scissors.
Now these are a multi-function tool,
the blade or the scissor tips have four functions
and they're made from Japanese stainless steel.
The handles and the blade cap are made from PBT
material and one thing I like about this is firstly
this locks into place so it doesn't fall off.
When you're transporting or moving them around,
you can obviously put this into a tool bag
or tool pouch, remove the scissors,
use them for whatever you're working on, and then return
those back into the position, which will lock in place.
And the four functions of these is obviously you have
a partially serrated blade, you then
have a standard smooth blade
and smooth blade fully on this other side, you then have some
wire strippers or wire cutters built
into the midpoint of the tool, and the tip of this
edge of the blade also acts as a box cutter.
So not a huge value add but just another little feature
which might come in handy.
Now these are designed for cutting
a wide variety of different materials.
The overall length of these is 6.3 inches or 160 millimetres.
The blade length is 56 millimetres or 2.2 inches
and they weigh 120 grams or 4.2 ounces.
So nice and lightweight.
So you can use these for cutting coaxial cable,
coated insulated cable, rope, leather.
Even CDs, steel wire up to 1.2mm as well,
I'll make sure I put all the different dimensions
of what they can cut on screen,
but they have a seriously impressive cutting capacity for
such a small tool.
So these feel really well made as a lot
of Japanese tools are and I can see these coming
in really handy for a range of different cutting tasks
and the fact that it has this blade
cap is another useful feature,
so it makes it easy to store away in a tool pouch or a
tool bag and not worry about the tip
of the scissors puncturing through any material.
Okay so next up here we have the small Shinwa calipers.
These are known as the Sokutes and this is the 70mm long version.
Now I actually also have the packaging contents for this again
so if you want to have a look at
that in closer detail. Now these are made from plastic,
it's a compact plastic caliper.
They're made from a polycarbonate resin
which helps avoid scratching delicate surfaces or
causing rust and these are very lightweight at only 6g or 0.2oz.
These are very easy to use one-handed,
the construction being from the polycarbonate
material still feels very sturdy.
The model number is 19514 as you can see stamped on the tool.
Now these are very small and compact,
you have a decent measuring capacity at just under 75mm
and you can obviously use these for measuring both the internal
and external diameter or depths
and you have this depth gauge
or step gauge at the base of the tool as well.
Shinwa does make a stainless steel variant
of this as well as some longer models as well.
So if you're someone that prioritises durability,
maybe that's something worth looking into.
However these are very cost effective
and the fact that they're so small at only 6g
and very compact as well,
it's really easy just to throw these in a shirt pocket or a tool bag
and have them on you for when you need them.
So similar to the calipers,
we have another tool here from Shinwa, this is also from the
Sokute line up and this is a stainless steel rule with a stopper.
The model number on this is 76751,
they also still have the packaging sleeve that this
came in so if you want to take a closer look
at that, there it is on screen.
And this is a 150mm long stainless steel rule
and obviously this brass stopper
can be adjusted with this little screw
or grub nut up the top, that locks then into
position wherever you set this and if you did want
to remove that, you can actually
take this off and just use it as a standard rule.
So you have the fine metric graduations on both edges
and you also have this handy
conversion table on the back with a range
of different sizes so you can quickly
convert those without having to get out a calculator.
Now the finish on this as well,
obviously it's a stainless steel rule but you have this non-glare
finish with the etch markings on the top.
And this is a 150mm long rule but the overall dimension
is 175mm, you have a width of 22mm
and the thickness is 5mm so very small,
lightweight and compact and the weight of this is 20g.
And you can see on the top side here you have graduations
in 1mm increments and on the bottom
side here you have 0.5mm increments.
So this is another relatively cost effective tool,
I like the fact that it's stainless steel
so it should last a bit longer and having the sliding
stopping mechanism is very handy
if you're doing repetitive marking or need to measure
depths. Obviously if you're a woodworker
or someone who is quite often having to
make accurate measurements, this is
something that will come in quite handy.
So next up here we have this small lobster wrench,
now this model number is UM24SS and this
is a compact ultra lightweight pocket
adjustable wrench made in Japan by Lobtex Co.
I actually have the packaging contents as well
so if you want to take a closer look
at that, just again pause the video.
And so some of the specs or features on this,
this is 118mm long or 4.6 inches, it only
weighs 80g or 2.8oz so very lightweight and the jaw capacity,
even though it's a small
It goes from zero to 24 millimetres
at the max mouth opening size, which is 0.94 inches,
and the max bolt or nut size is up to M16.
And the style of this, this is a hybrid monkey wrench,
and it has this fluted skeletonised
grip to reduce the weight, and it has
a built-in measurement scale as well on the tip of the tool.
So this is a stainless steel tool.
I have the smoke version,
which these are dipped in a plastic or a vinyl coating, which
isn't insulated or shockproof, which is just worth noting,
but you can also get red, blue
or green, so depending on which you like.
There's a few different options out there.
So this is great for EDC or working in those confined spaces.
Having such a short profile design,
this is convenient for those places where a conventional
adjustable wrench just can't get in or it's very awkward.
This has a pretty sturdy locking mechanism
so whatever depth you set this to, it has a small
amount of play but it's nowhere near as bad
as a lot of other wrenches that I've had in my
experience so the fact that this is Japanese made,
it feels like they've paid attention to
the quality and the durability of it
and I like the fact that it's so small and compact and barely
weighs anything so similar to a lot of the other tools,
very easy to throw in a tool bag or
possibly your pocket. You do have a couple
of small little holes through here so you could
You could obviously tie a tether or a lanyard loop through this.
And carry that with you on the daily.
And last but not least we have
these Vessel 3500E-5 wire strippers with inbuilt screw cutter.
Now these are a professional grade Japanese made tool designed
for precise wire stripping
and light cutting tasks.
I also have the packaging contents
so you can once again pause the video and take a look at this.
Now some of the key specifications on this,
these are spring assisted, they have this inbuilt
locking mechanism on the handle
which is easy to use one handed and they have a nice
spring assisted action which easily kicks the tool open.
The compatible wire diameters, I'll put those on screen,
but it ranges from 0.65mm right up to 2.6mm.
The total length of this tool is 163mm long
or 6.4 inches long and it weighs 107g or 3.77oz.
These have a special tool steel blade,
they have an S55C body, they also have some small pliers
on the ends, you can obviously use
those to grab onto the wires and twist them.
You have these really nice black and blue cushion grips
and you also have a small lanyard hole
on either of the handles.
So these have what they call true circular blades
which are precision machined circular
cutting edges which cleanly remove insulation without nicking
or damaging the internal core
wire.
They also have this M3 and M4 inbuilt thread cutters
which handle small bolts and screws
relatively well.
They also have this small strip length scale
which has an engraved measurement scale on
the body for quick repeatable stripping lengths.
So as per most of the tools we've seen today,
these feel really nice in the hand.
Something about these grips, the grips probably feel
the best out of all the tools I've handled.
They have a nice solid spring action mechanism
and the fact that they can be used one handed
very easily is a nice added benefit.
Okay so there you have a quick review
of the seven Japanese tools that I've picked up recently.
Now there are some pretty interesting little tools
in this lot. For me the standout would
have to be this small little lobster wrench.
I like just how small, lightweight and compact it
is and also the fact that it goes up to 24mm
or an M16 bolt is quite a useful feature for such
a compact tool and the GT scissors by Engineer are also very sharp,
really nice to use and I
can see those being something I add to my daily carry.
Let me know in the comments below.
What your favourite Japanese tool brand
is is I'm always looking for new tools to try.
Be sure to check the video description as well
as I'll note the model numbers and also
provide links to each of the tools shown here.
If you enjoyed the video, give it a thumbs up
and consider subscribing for more tools,
EDC and reviews.
Thanks for watching and I'll see you in the next one.
