🎄📖 Get The Christmas Decorating Handbook — timeless decorating secrets, designer tricks, and beautiful holiday ideas all in one place: https://publy.store/t/nAgYA0E
In this video:
• Where to begin — plan your room before opening every decoration bin. • Christmas tree decorating — build a balanced look from lights to finishing touches. • Ornament placement — create depth instead of crowding the branches. • Ribbon and garland — use them to bring the whole tree together. • Mantel decorating — arrange greenery, candles, and accents with balance. • Christmas colors — choose a consistent palette throughout your home. • Decorating mistakes — recognize when too many pieces compete for attention. • Finishing touches — make your decorations feel collected rather than cluttered. #decoratingchristmastree#christmastree#christmas
AI Generated·May contain errors
Comments are disabled for this video.
50 years of Christmas decorating taught me lessons
that cost real money, and you're
getting every one of them in the next 20 minutes.
All of it.
Everything I know, in the order you'll actually use it.
And the very first lesson is going to sound backwards.
The ornaments go on sixth, not first, sixth.
I know how it goes in your house, because it went that way in mine.
The bins come down the Saturday after Thanksgiving,
the lid comes off, and there they are.
The glass balls.
The little felt angel your son made in second grade.
So they go on first, because of course they do.
Then the lights get wound around the outside like a fence.
And by 10 o'clock, there's a cord showing down the front.
A bald spot near the top you can't reach.
And that felt angel has disappeared somewhere around the back.
And you decided it was just your tree.
Too old, too thin, not enough money for the good things.
It was never the tree.
It was the order.
My name is Dorothy.
I hung my first ornament at seven years old
on my mother's tree in front of the picture window
of a little brick house,
and I've decorated every Christmas since.
For more than 30 of those years, it was also my job.
And one December, I finished 11 client trees in nine days
and swore I'd never do it again.
I did it again the next year.
By the end of this, you'll know the order
a professional decorates in, step by step,
The tree, the mantle, the front door, and the table.
You'll know where to spend and where to save
and how to pack it all away
so next year takes half the time.
Somewhere in the middle,
I'll show you the cheapest ornament you'll buy this year,
the one that does the most work
and that nobody will ever see.
And then I'll tell you the part the stores
would rather you never heard.
Stay with me.
Let me start with what most people get wrong
because if you don't understand this,
nothing else works.
A room at Christmas is red in layers,
and the eye reads them in a fixed order.
Light first, then shape, then depth,
then sparkle, then the personal things.
Decorate in any other order,
and every layer you add buries the one before it.
Think about getting dressed for a party.
You don't put your earrings in and then pull a sweater over your head.
A tree works the same way.
Here's the order I've used for 50 years.
Fluff, lights, topper, ribbon, picks, ornaments, then the base.
Then the edit.
Ornaments land sixth because by then
the tree has light inside it, ribbon to frame
them, and depth for them to sit in.
But before you touch a single branch,
there's one decision to make at the kitchen table,
and it costs nothing.
Pick three colors.
One main color, one supporting color, and one metal.
Red, green, and brass.
Navy, cream, and silver.
Plum, blush, and gold, every bin you own gets sorted against
those three, and anything that
doesn't fit takes the year off.
It isn't thrown away, it rests in the garage, and comes back the
year the palette changes. Why three?
Because a tree with nine colors reads as noise from the
doorway, and noise reads as cheap,
even when every ornament on it cost a fortune. Three colors,
repeated, read as a plan.
Your guests won't be able to say why it looks finished. They'll just
Just feel that it does.
Then choose the spot. The tree goes where it's seen first,
from the front door or through the
front window after dark,
and within reach of an outlet so no cord crosses a walkway. A cord
running under a rug where people walk
is how somebody's aunt goes down on Christmas Eve.
Move the armchair instead.
And now the first step on the tree itself, which is the step
almost everyone skips,
and it's exactly why their tree looks thin, fluffing.
If your tree is artificial,
every branch has spent 11 months crushed flat in a box,
and it will not spring back by itself.
You have to shape it. Put on an old pair of garden gloves
first, because those needles have wire inside
and they will scratch your wrists raw. Start at the
bottom row, at the trunk, and work outward.
Every branch has small tips coming off it. Spread them
like fingers, some up, some sideways, some down,
so no two point the same way. Then move up a row.
If your tree is real, the work is different.
Before it goes in the stand,
Have a fresh cut of about half an inch taken off
have a look at the tree.
the bottom of the trunk because a cut
that has dried over can't draw water.
Get it into water within a few hours, then leave it alone overnight.
The branches were tied down for the trip home,
and they need a night to drop and settle before
a single light goes on.
Fluffing an artificial 7 1⁄2-foot tree takes about an hour.
I won't pretend it's fun, but it's the single biggest difference
between a tree that looks like it came off a big box shelf
and one that looks like it came out of a showroom, and it's free.
A designer will fluff a client's $80 tree
for a full hour before she spends $1 on it.
Here's how you know you're done.
Stand across the room. If you can see
the center pole anywhere, keep going.
Once you can't, you've built the thing that's about to hold the light.
The rule of thumb designers use
is about 100 lights for every foot of tree.
A seven and a half foot tree wants roughly 750.
Plenty of pre-lit trees come with far fewer than that,
which is why so many of them look dim from the street,
and why there's no shame in adding a strand
or two of your own.
But the number matters less than where the lights go.
Most of us were taught to walk circles around the tree,
winding the strand around the outside.
That's a cage. It lights the surface
and leaves the inside dark so the tree looks flat. Instead,
take one branch at a time.
Run the strand from the tip in toward the trunk and back out along
the same branch, then on to the next one.
It's slower, and it's the reason a catalog tree seems
to glow from somewhere deep inside.
Start at the bottom, at the back, closest to the outlet so the
plug end is already where it needs to be,
and give each strand its own band of the tree. Bottom,
Bottom, middle, and top.
Plugged into the strand below it,
or into a power strip hidden at the base.
If a strand fails on the 20th of December,
and one always seems to, you replace one band.
You don't strip the whole tree.
Choose warm white, not cool white.
Cool white reads blue in the evening and turns skin gray.
And this matters more than you'd think, because
when your family lines up in front of that tree for the picture...
Warm light coming from inside the branches
is what makes everyone look rested.
Keep the lights plugged in while you work
so you can see the gaps as you go.
Get the next part wrong, though,
and a pretty mistake becomes a dangerous one.
Check the box for a safety mark
from a recognized testing lab, like UL or ETL.
Run your fingers along every old strand
and throw out anything with cracked insulation,
bare wire, or a crushed plug.
Never connect more strands end-to-end than the package allows.
And turn the tree off when you go to bed or leave the house.
If your tree is real, it drinks more
than you'd expect in the first week,
so check the water every single day
and keep the tree well away from the
fireplace
and the heat vents. There's a story going around
that LED lights can't start a
fire because they run cool.
It isn't quite right. They do run much cooler, which is wonderful,
but a damaged cord or an overloaded
outlet doesn't care what kind of bulb is
on the end of it.
The topper goes on third.
Right after the lights for two reasons.
The first is your back.
The top of the tree is the only part
that needs a step stool, and if you do it now,
you climb once.
Use a sturdy two-step stool with a handle,
never a kitchen chair, and never reach past
your shoulders.
The second reason is that the ribbon is about
to fall from the topper, so the topper has
to be there first.
Before you buy a topper, measure.
Take your ceiling height, subtract the height
of the tree and its stand, and that's all
the room the topper gets.
A seven and a half foot tree under an eight foot ceiling leaves.
6 inches, and plenty of toppers are taller than that.
A topper bent sideways against the ceiling
is the first thing every eye goes to.
Choose a lower one, or a shorter tree, now in the store,
not on the night you're standing on the stool.
Now, ribbon.
Wired only. The thin wire sewn into both edges
is what lets a ribbon hold a curve instead of
collapsing flat. And that's the difference between ribbon
that looks styled and ribbon
that looks dropped. Two
and a half inches wide is a good everyday size. Go to four inches if
your tree is nine feet or taller.
And please don't wrap it around the tree like a barber pole.
Horizontal bands cut a tree into slices
and make it look shorter and wider. Start at the
topper instead and let the ribbon fall down the tree
in loose vertical waterfalls. Three to five
Five of them spaced across the front.
Every 10 or 12 inches,
push it into the branches and let it puff back out in a soft pillow.
Vertical lines make a tree look taller,
and a 7 1⁄2-foot tree done this way takes 4 or 5 10-yard rolls.
Want it to look richer still?
Run two ribbons together as one, a wide-patterned ribbon underneath,
a plaid or a velvet, and a narrower solid laid on top in your metal.
Pinch them together every time you tuck,
and they move as a single ribbon with two layers of color.
Where each waterfall ends near the bottom,
don't leave the tail hanging.
Tuck it back into the branches so the cut end disappears.
The craft stores put Christmas ribbon on sale
so often that paying full price is optional.
Wait a week. But ribbon is also
the one place I'd rather you spend a little more,
and I'll tell you why in about four minutes.
Picks and sprays go on fifth,
and this is a layer most trees at home are missing entirely.
A pick is a single stem with something on it,
berries, a sprig of eucalyptus,
a cluster of little pine cones.
You push them into the tree from deep inside,
angled outward, and all at once the tree has texture
and shadow. Why does that matter?
Because a professionally done tree has
three depths, something near the trunk,
Something in the middle and something out at the tips.
Most hung trees only have one, the tips, where every ornament hangs.
Picks fill the middle and pull the eye inward.
Keep a pair of wire cutters beside you,
because pick stems are wire inside and they'll ruin
your good kitchen scissors by the third one.
A long pick can often be cut in half and used twice,
which doubles what a bag gets you.
Push each stem in deep, then bend the end around
a branch like a little hook so nothing
slides out when the tree gets bumped.
Group them. Don't sprinkle them.
One berry pick every 18 inches looks like confetti.
Three together, then a space, then three more looks intentional.
Repeat the same pick high, middle, and low at least three times
so the eye zigzags down the tree the way it does in a magazine.
A bag of 10 picks from a craft store sale does more
for an ordinary tree
than a box of new ornaments ever will.
Which brings me to the cheapest ornament you'll buy all year.
It's a plain shatterproof ball in your main color,
matte or satin, a box of two or three
dozen for a few dollars.
It goes so deep in the tree that nobody will ever notice it.
Hang them close to the trunk, top to bottom,
they catch the light you wove in and bounce
it back out, and they fill that dark hollow at the center
so the tree looks twice as full.
In the trade, we call them fill balls.
Your heirloom glass shouldn't be hidden back there,
so the cheap ones do that job.
Then come the ornaments you love.
Largest first, and a loose zigzag.
Then the medium ones, then the small ones, tucked into the gaps.
Hang the heavy ones close to the trunk where the branch is strongest,
so they don't drag the tip down.
And push a few deeper into the tree,
rather than letting every single one dangle off the end of a branch.
Close every ornament onto its branch,
pinch the hook into a full loop or use a short twist
of green floral wire and nothing drops when someone brushes past.
And if grandchildren or a dog are part of your December,
save the bottom two feet of
the tree for shatterproof only.
The glass goes higher where small hands and happy tails can't reach it.
The ones that matter most go on last.
The felt angel, the macaroni star
with your daughter's name on the back, your mother's
They go at eye level on the side that faces the room,
never banished to the back because
they don't match the palette.
A three-color tree isn't a museum.
It's the frame that makes those pieces stand out
because they're the only things on it
that weren't planned.
That's exactly where the memories belong.
Now, I promised you the part the stores would rather you never heard.
Every year, they roll out a complete new look.
A new color story with matching ornaments,
matching ribbon, the matching topper, and
the matching tree skirt.
All styled together on the floor
so you can see exactly how it would look in your living room.
And it does look lovely. It's meant to.
The business of selling Christmas works best
when last year's tree feels finished
and this year's needs starting over.
Here's what designers actually do.
We keep the base, the tree, the lights,
the fill balls, the neutral ornaments.
Then every year we add three or four things in one new color.
Three rolls of new ribbon
and a dozen new picks will change a whole tree for about $40 or $50.
A complete coordinated theme.
Ornaments, ribbon, picks, topper,
and skirt can easily run $300 or $400,
and next year it goes into a bin beside last year's complete theme.
Nobody planned this in a back room. It's quieter than that.
A store makes money when you replace
things, so it shows you replacing them.
Nobody earns a dollar teaching you to rework what you
already own, so nobody teaches it.
So the real question isn't what's new this year. It's where
your money should actually go. Spend on three things.
The ribbon, because cheap unwired ribbon
goes limp within a week.
The lights, because a strand that dies every December
is no bargain, and one statement
piece for the spot people see first,
like a good topper or a full front door reef.
Save on everything that lives in the background.
Fill balls, ornament hooks, green floral wire,
plain glass vases and cylinders, and battery
candles can all come from the dollar store, and nobody will ever know.
The boxed shatterproof sets at Walmart
are a perfectly good buy for the back half of the tree.
And HomeGoods or TJ Maxx is where you'll find the one-of-a-kind piece,
but buy it the day you see it.
It won't be on that shelf next week, and it won't be restocked.
Then mark your calendar for the week after Christmas.
That's when next year's ribbon and
picks go on deep clearance, and it's the cheapest moment
of the whole year to buy them. Shop for the
one new color you've been wanting to try,
buy only enough of those three or four new things,
and put it straight into a labeled bin
so you don't buy it twice next fall. Skip anything heavily
glittered. It sheds on your floor, your sofa,
and your grandson's hair until Easter. And skip the
Foam-looking picks with shiny plastic berries.
Up close, they read like a craft project.
A real touch stem or a few evergreen branches
clipped from the yard will look 10 times better.
Trust me on this one.
By now, everything is on the tree.
And the next step is the one I'd teach before any other
because it's where a pretty tree becomes a finished one.
Step back and take things off.
I mean it.
When you think the tree is done, stand at the front door
or wherever people first see it
and squint until everything goes soft.
Squinting hides the detail and shows you the shape.
The dark holes jump out.
So does a clump of three red balls in one spot
and any branch that's drooping.
Then take a picture of it with your phone.
The camera is crueler than your eye and more honest.
It will show you the gap you stopped seeing an hour ago
and the cord you forgot was there.
Fix what the photo shows you.
Then take three ornaments off.
Almost every home tree is one handful away from finished.
And that handful is always too much, never too little.
I did this wrong for 11 years.
I thought more was generous.
Then a client told me very kindly
that her tree looked tired and she was right.
I'd covered every inch
and there was nowhere for the eye to rest.
The year I learned to edit
was the year my trees started looking like the pictures.
And the family photo in front of that tree
is the one that ends up
on somebody's refrigerator for years.
So give it a tree worth keeping.
There's one place left on the tree
that most people forget entirely
and every single guest sees it, the base.
It's the last thing a guest notices on her way
in and the first thing she sees when she
sits down, and a bare green plastic stand undoes the whole tree.
A tree collar is the cleanest answer,
a stiff ring that wraps around the stand.
An old galvanized tub or a big basket works too,
if your stand fits inside.
A collar gives the tree a crisp bottom edge,
the way a good hem finishes a skirt.
If you love a soft tree skirt,
Use it, but lay it flat and smooth, not bunched up in rolls.
Then wrap a few empty boxes in paper from your palette
and stack them in front at different
heights. They hide the stand, the cord,
and the outlet, and they make the room feel like
Christmas morning a month early. Three boxes is plenty.
Five if it's a big tree. Now step
away from the tree, because the rest
of the house still has to look like it belongs to it.
The trick that makes a whole house look designed is almost too simple.
Repeat the tree's palette in three other places.
The mantle, the front door, and the table.
Same ribbon, same picks, same metal.
Not identical arrangements, just the same family.
When someone walks from the front hall to the dining room
and keeps meeting the same plum velvet and brass,
she assumes the designer did it.
On the mantle, think in odd numbers and different heights.
Lay a garland down first and let it hang a few inches past each end.
Then group three things off-center, one tall, one medium, one short.
A candlestick, a lantern, a little brass deer.
Never a straight row of seven matching pieces lined up like soldiers.
Most people buy a front door wreath that's too small.
A good rule is about two-thirds the width of the door,
which on a standard front door means a wreath
around two feet across. Hang it at eye level
and finish it with a bow made from the tree's ribbon.
That door is the first thing your family sees coming up
the walk and it tells them what's
waiting inside before anyone rings the bell.
The table is the easiest of the three. A long
runner of greenery down the center
and clipped branches from the yard are fine with battery
candles and plain glass cylinders.
Keep everything lower than the chin of someone sitting down
So nobody has to talk.
And that's the whole house, except for the day almost nobody plans for.
The day it all comes down.
How you put it away decides how next year goes.
Take it down in reverse.
Ornaments first, then picks, then ribbon, then lights.
Wrap each light strand around a square of cardboard.
Plug end first so it unwinds next year without a single knot.
Roll the ribbon loosely around
an empty paper towel tube with a rubber band over it,
and it comes out still smooth and still holding its shape.
The picks get their own bins so nothing crushes them.
Wrap glass ornaments one at a time and tissue paper, never newspaper,
because the ink rubs off onto the finish.
Small ones ride safely in clean egg cartons
or the divided boxes they came in.
Heavy things go in the bottom of a bin and glass goes on top,
When the bins get stacked in the garage,
label the bins by where they go, not by what's in them.
Tree, mantel, front door, table,
each bin goes straight to its own room and you're not opening
nine boxes hunting for one wreath.
Keep it all out of a hot attic if you can. Summer heat warps
candles, weakens the plastic on old ornaments,
and lets go of the glue on half the things you own.
A closet or the basement is kinder.
The last thing is the one I'd never skip.
Before a single ornament comes down,
take one picture of every decorated room,
print them, and put them in an envelope on top of the tree bin.
Next November, you open that bin
and the whole plan is sitting right there.
That one envelope cuts next year's work in half.