I've seen cheap viscose look couture and expensive silk look homemade. The difference rarely comes down to your sewing machine or your budget. It happens on the cutting table, before a single seam is sewn.
In this video, I'm walking you through 5 fabric cutting tricks that take handmade clothes from homemade to high end. We cover how to stop slippery fabrics like chiffon, georgette and silk from shifting, how to get your grain line exactly right, how to use your fabric shears the professional way, how to cut directional fabrics, and how to approach pattern matching with prints and stripes.
Along the way you'll see why the edge your fabric shop cut for you might be working against you, the corduroy panel from my graduate collection that taught me a lesson the hard way, and a matched seam side by side with a mismatched one.
None of these tricks need expensive fabric or new equipment, just a few professional habits most home sewers are never shown. If you've ever finished a make and felt it looked a little homemade even though your sewing was spot on, start here.
CHAPTERS 00:00 Why expensive fabric can still look homemade 00:36 Trick 1: The fabrics that refuse to play ball 01:41 Trick 2: The edge you should never trust 04:28 Trick 3: Are you using your shears the professional way? 06:19 Inside the DPL Atelier 06:43 Trick 4: The mistake I made on my graduate collection 07:37 Trick 5: The most visually expensive trick of them all 08:41 Think like a designer at the cutting table
You don't need expensive fabric to make clothes look expensive,
you need an accurate cut.
I've seen cheap viscose look couture
and I've seen expensive silk look homemade and that
difference almost always happens before a single seam is sewn.
That's hard to say. It happens on
the cutting table. In this video I'll walk you
through five fabric cutting tricks to take your
garments from homemade to high-end and anybody can do them.
From stopping slippery fabric from
shifting to getting your grain line exactly right
and seeing if you've been using your shears the
the professional way. Let's start.
Let's dive in.
Now, have you ever had the frustrating experience
of working with georgette, chiffon, slippery
viscose or silk, and those layers just don't want to play ball?
You pin it, you think it's flat,
and by the time you've cut around all your pattern pieces,
everything has shifted out of place.
This is the starting point of puckered seams,
twisted hems, and many an expletive at the
sewing machine, if we're honest.
But here is an easy fix
to help you get confident working with those textiles.
All you have to do is place a layer of tissue paper
underneath it. Lay your tissue down first, lay your fabric on top,
and then place your pattern pieces.
Pin through all layers before cutting out as normal.
You'll notice your work stops shifting
and you can peel the tissue paper away afterwards.
That's because the tissue offers your fabric enough stability
so that the layers all stay
together. Your scissors will not blunt
because of the lightness of the tissue paper and will
achieve a nice clean cut edge.
It costs almost nothing and it will transform any sewing project
of yours that incorporates soft and fluid fabric.
Now let's talk grainline. This could be an entire
video on itself and I've covered it
in many of my videos here on YouTube or
Now this really is the differentiator between
your piece hanging like a designer item
or twisting and pulling unevenly after just one wash.
So what is a grain line?
On a pattern piece it is marked as a long line with an arrow
and it needs to run perfectly
parallel to the selvage of your fabric.
If it doesn't this will cause your garment to hang
unevenly, twist awkwardly
or just drape with a result that you're not looking for. And here's
the bit that most beginners often miss,
don't always trust the shot cut edge of the fabric.
Regardless how careful that fantastic staff member has
been to square off from the selvedge,
it is very rarely accurate to the grain.
With many plain weave fabrics, which is where we have a warp
and weft fibre, you can frequently snip
and rip to find the straight grain. But you can't always
do that, especially if you're working with twills,
some denim, satins, it won't tear cleanly and so
we won't have an accurate cross grain in order
to cross reference to our straight. So we need
So we need to prepare our textile accordingly.
Finally put it through the wash,
overlock the edges if you need to to avoid any fraying
and iron it flat once it's dried.
We need to true the fabric first with a method that works for anything.
So press your textile smooth and fold it salvage to salvage.
We want to shift the top layer of our fabric until
the fold lies completely smooth with
no ripples or weird distortion.
Working with the fabric in a really organic matter
and allowing the fabric to do what
What it wants to do is going to give us...
An accurate read. Once the selvages match and the fold is smooth,
we can square it off at the top
edge of the fabric and trim it straight.
For some selvages we can also cut those off too,
especially if they pucker and they're pulling the seam in.
And once we've established our
fabric is flat and the grain lines are true,
we can then place our first pattern piece accurately
on the grain. Measure from both ends of your arrow
to the selvage until both measurements
are exactly the same. Top tip if your grain line is
This is a short-ish line.
Try to extend that to the longest area
of the pattern possible.
This will really help you with accurate laying.
Now pin that first piece down so it cannot move.
If you've taken your time with this,
you can use that first pattern piece as a reference point.
Especially handy if you're working with a wide piece of fabric
so that you don't have to
constantly stretch over your cutting table
and measure to the salvage. You can use that first
pattern piece as a reference guide measuring to its grain line.
This will save you time whilst
keeping everything aligned.
So an aligned grain line is one of those essential details that will
make your home sewn garments look richer once they're sewn.
Now I'm going to break down how
to use your fabric shears step by step.
This is often a professional technique that many beginners
aren't shown and these three tips go together
because they're going to teach you how to use your shears.
properly. First, we want to keep our fabric on our dominant hand side.
So if you're right-handed,
keep the bulk to the right of your scissors.
And if you are left-handed, using left-handed shears,
they do exist, keep the bulk of your work to the left of your shears.
Then utilize the table to
support the weight while the small waste falls away.
Don't pick your work up off the table
because gravity will work against you,
especially with those slippery fabrics we mentioned previously.
It's all going to go peep.
Tongue. Second, keep the bottom blade
of your shears touching that table. Let it glide along
the surface. Do not lift and snip.
This can create really jagged edges and distort your work as
you're cutting it out. Have a little look at the difference.
When the blade stays down, the fabric
stays flatter. We've got less pulling and a much smoother line.
I know this is simple, but it really
can make all the difference to your project.
Finally, don't close your shears.
Completely. Use long,
smooth strokes and stop just before the blades come to a full close.
Then slide forward. When you fully close every single time,
you get jagged steps along the edge
of your fabric. Think of it like sketching with a pencil
and you're doing really small back and
forth strokes with your hand versus one continuous smooth line.
We want to replicate that with our
fabric scissors. Keep that smooth rhythm
and the edge of your pattern pieces, once you cut them in
fabric will come out in a beautiful continuous
and smooth line. And that clean edge matters.
I always say that inside of your garment should
be as beautiful as the outside.
And a clean cut is where your beautiful seams begin. It
sews together more easily. It presses more crisply.
And if you're enjoying these simple
but professional techniques
and would like to build on your confidence beyond simply
following a sewing pattern,
that's exactly what we work on inside the DPL Atelier.
Our skill builders break down design,
pattern cutting, fitting, and sewing into sequential
and manageable lessons,
helping you to develop the skills to create a wardrobe that's entirely
your own. You can find out more through the link in the description.
Now, let's get back to the
cutting table because
this next trick has us thinking more like designers. Make sure you are
cutting everything in one direction
because this is a true signal of luxury. Velvet, corduroy,
satin anything with the sheen and a special
Especially when you're working with prints,
can look very cheap if one piece is upside
down.
Trust me on this, I found out the hard way
when I was developing my overalls, my graduate
collection.
Even though it was all in black,
having one panel of the corduroy I was using upside down
created a different colour, believe it or not.
You could absolutely tell the panel was the wrong one
because the light broke.
Of course this is easiest to see
when you are working with prints especially if those prints
are directional otherwise that inconsistency
is exactly what makes home-sewn garments look off
even when your sewing is perfect.
Now the final suggestion is the most visually expensive trick
of them all because if you do not match
your patterns your prints or your motifs
at the cutting stage
then this really is a shortcut to having a homemade result.
So think stripes that meet at the side seams,
placement of large motifs on the body and where
they lie, and simply where your eye will be drawn
to if we don't take this extra step in attention
to detail.
And it doesn't need to be overcomplicated.
You can aid yourself in this by cutting your textile flat.
You can draw the pattern on your pattern piece,
ensuring that you account for your seam allowances.
Or you can cut your first piece
and then use that first piece cut from fabric
to position the second piece
so that the horizontal placements align.
As always, there is more than one way to do this
and achieve the result.
But even if you only do a simple striped t-shirt,
the payoff can be enormous taking this extra step
up your patterns and prints.
Have a little look at a match seam next to a mismatched one. One looks
considered and the other will look rushed.
So let's put it all together. Tissue underneath those
slippery textiles for stability.
True your fabric and then anchor your grain line. Handle those
scissors so that your edges stay clean.
One way and directional cutting so that the sheen and the
pattern stay consistent and planned pattern matching
so that your design flows seamlessly
from front to back.
Try any one of those on your next sewing project,
and take note of how much calmer the process might feel.
The pieces fit together, the seams lay flat,
and you get that sharp, considered finish
that we associate with expensive clothing.
You are the designer of your wardrobe,
and this is how you make it look that way
from the very first cut.
So let me know in the comments what you took from this video,
what you're excited to try,
or any tips that you take to the cutting table.
For now, stay safe, keep creative,
And I'll catch you on the flip side.