400 hours of Violin Making in 14 mins - Full Build Walk Through

Amazing Traditional Craft
29 followers
6 Video Views·Oct 30, 2026
Check out my website: https://www.violinmakingacademy.com/
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a comprehensive overview of the traditional art of violin making, guiding viewers through the technical process of constructing an instrument from scratch. The creator emphasizes the importance of following master models and precision in craftsmanship, ultimately promoting an online academy designed to preserve these skills for future generations.
Have you ever dreamed of crafting your own beautiful violin,
creating melodies that resonate for a lifetime?
What if I tell you that, starting in 2026,
you can turn that dream into reality,
right from your own home, with just a little passion and courage?
In this video,
let me take you on a journey through
this mesmerizing world of violin making.
To make a violin, we usually will start by choosing a good violin model
from the great masters such as Antonio Stradivari or Guarneri da Gesu
and following it as closely as possible so that we can develop
an understanding of why it works and what small changes may affect
the tone, because we simply cannot make a good violin by accident.
After designing which model you want to build,
reduce the overhang and the ribs thickness from the outline.
Usually it will be four millimeters all around
to get the inner outline.
We will then use this inner outline to make the form
and start making a violin from this form.
Notice that there are some sockets on the corners
as well as on the top and the bottom of the form.
We will use spruce
or willow to make some blocks to fill in those areas,
completing the inner outline.
And it is very important that the curves on the sides are smooth,
so we can glue the ribs on properly.
We use maple for the ribs,
and we will use a block plane to plane them down to one millimeter.
Gently and slowly, we bend them into shape with a bending iron.
Glue them onto the form.
And you know, we call these little pieces, ribs.
And the thing we are making after all the ribs
are glued is also referred to as ribs.
The terminology in this violin making
world can sometimes be a bit confusing.
Next, we will add some linings to the inside of the violin,
which will help reinforce the strength of the violin body.
You can actually see these linings
when you look inside the violin through the F holes.
They are subtle, but they are there.
With the ribs, we will outline the shape
of the violin on a large piece of maple
and saw the piece out.
Refine the edges
and also the corners.
After that,
we will open a purfling channel along the edge
and then work
on the purflings.
Fitting them into the channel
and then we will focus
on the scoop
while refining the purfling.
The arching, we will use finger planes to slowly shape the arching
under this beautiful lighting.
This is often the step where most people fall
in love with violin making.
And when the arching looks good,
scrape it to make the surface smooth and clean,
like an egg without the shell. A boiled one, I mean, not the scrambled.
Flip the plate over, and use
a gouge to hollow out the plate
to get the desired thickness.
We will start with a rough thickness,
and then use finger planes to trim away the big tool marks
and smooth the surface.
The thickness of the plate is crucial.
If it is too thick, it will dull the sound, and if it is too
thin, the volume may sound bright when completed,
but will lack growth in tone over time. After that,
we work on the edges to make them smooth and elegant,
and to pay special attention to the
corners, although they don't actually affect the sound.
They're there purely for aesthetic reasons.
And once we finish the back, we work on the top.
We use spruce for the top,
and we will repeat everything we did for the back,
with a slightly different shape of arching.
The procedures will be somewhat easier, as spruce are softer.
Then, also scrape the surface,
and hollow out the plate to get the rough thickness.
Next, flip the plate over again, and open the F-holes.
Or sound holes, for better manner.
You can use a saw, a knife, a file,
or any tools that suits your skill to make these holes.
Many people will tell you that you cannot use certain tools,
but don't listen to them.
If you can do a good job with what you have, that's all that matters.
Keep working on the thickness,
and also scrape the surface to make it smooth.
You can actually tell the thickness
by holding the plate up to the light.
If it is thin enough,
you will see it turn into a beautiful color like this.
Work on the base bar, just do a chalk fit,
and glue it in place.
Wait overnight, then refine the shape of it.
After that, focus
on the edges again.
And once the ribs, back, and top
are ready, we can put them together.
Many of you ask how I remove the ribs from the form.
Well, it's actually quite straightforward.
If you are doing it correctly,
there should be some space between the ribs and the form,
allowing you to take the ribs out without breaking it.
And yeah, ribs and it.
Terminology, you're welcome.
And once we're ready, glue them together.
And you know, I even find some shops on Alibaba
that have stolen this shot to sell their violins.
I think they must really like my filming style.
Next, refine the surface to make it look smooth and polished.
Personally, I would put the
ground coat onto the body now
for a better protection during the upcoming steps.
And after this, we can work on the scroll.
We use maple for the scroll,
making the scroll is entirely different compared
to the top and the back.
You can think of the body as a sound box
and the scroll is a stick that allows us to interact with
the box to create different tones.
And regarding terminology again,
this spiral shape is called
the scroll and the entire part we are working
on is also referred to as a scroll. So when
When teaching my students,
I usually refer this spiral as the scroll hat or the scroll roll.
Crafting the scroll is another fun part of the process
and note that it is okay to do
a rough job when crafting the scroll head
and still achieve good sound quality in your violin
And when the scroll is ready,
open a mortise on the body
and so we can put in the scroll,
then glue them together
After that,
refine the neck, finalizing it to make it really really really smooth
As this area is where players first touch the instrument
and interact the most.
They can often determine if they like the violin
or not just by feeling this part.
It may be somewhat biased, but that's the reality.
And when we have a really, really, really good neck,
also put the varnish onto the heel and the scroll
After that,
put on the oil varnish,
which would usually takes a very, very long time to dry
And once everything is set,
we can finally get to set up the violin
I usually will start with the nut and the fingerboard,
both of which are made from ebony
Make sure the nut has a good shape
and the grooves are properly cut
Next, open another mortise for the saddle
glue on another piece of ebony
to serve as the saddle,
then shape it without damaging
the violin body
After that, move on to the back holes and also the pegs
Next, work on the sound post
and fit it into the violin body
Lastly, work on the bridge
and gather all
the accessories,
and the violin shall be complete
With just three types of wood
four strings, and a bow
the music a violin can create is infinite.
You know, the craft of violin making plays
a significant role in our history,
and it is crucial to approach it correctly
And because of this,
I spent the last few years building a website and creating a
detailed archive that explains the how,
what and why of each step in the process,
aiming to preserve this knowledge for the future generations.
And that's the very reason why this channel has been on pause.
If you are truly passionate about violin making
and want to transform your love for music into a
tangible creation that carries your unique touch,
go to violinmakingacademy.com or just click the
link in the description below to check out
the archive created from literally my sweat, blood,
and dedication. It is more affordable than
the tuition I paid at the Shanghai Music Conservatory
10 years ago.
And I must tell you that I even had
to pursue further studies after Shanghai,
because I found that many file-making schools aren't teaching
the right methods.
And with this archive, you can skip that frustrating part,
as well as the hassle of relocating far away.
Sincerely, hope to see you in the academy.
And if not, I'll catch you in my next video.
