Learn how to get the most from your cutting dies, creating layered, shaker and even spinning cards from all your nesting dies! All the techniques shown can be used with any shape of nesting die you already have!
hi everyone it seems you all love
nesting dieses and different ways to use
them because the last nesting die video
I put out was really really popular so
I've found this one that I filmed a long
time ago that shows you three different
ways of using your nesting dies full
cards created so you can see from start
to finish how I've really utilized the
best of those nesting dieses now you may
call them layering dyes shaped dyes
whatever it may be you'll find a link in
the description below for the ones I've
used and let's go and see from beginner
intermediate to Advanced three different
techniques that you can be using with
[Music]
yours I'm going to be using the creative
Craft products large nestable labels and
for this first technique I'm going to
pick the largest of three dyes and I
usually go with my pattern paper first
choose that first I'm going with a
stamperia pattern paper here then I
choose my base card stock to match it
and I'm going for this beautiful sort of
deep wine red color this is part of the
creative Craft products card stock range
I'm going to fold this in half I'm
actually making my own card base rather
than using a pre-made one so score this
in in half and then place your dye just
over the score line so you've got a
little bit of a join there D cut through
both layers and when you take the dye
off the card stock you'll have a card
base there and it's all secured at the
top then we want to complete the shape
so I'm going to recut this same D from
the same card stock but the entire D
this time not overlapping any edges and
this is going to give us a top part to
go over the top of our base and make it
all look nice and smooth and streamlined
and as if as if it's one piece so I'm
going to glue the two together using my
book binding glue from creative Craft
products there a little bit of excess
wipe that way and there we go so we now
have a card base I'm just going to SN
snip the ends I start with the back
panel first and if it still won't stand
on its own I snip the front but I prefer
not to snip the front if I can get away
with it this has now created my shaped
card base and then I go in with my
mattes and layers and this is the beauty
of nesting dyes you can use the mattes
and layers to create apertures to create
frames and like I say your mattes and
layers are so so easy with nesting
dieses so I've cut myself a large mat
there and then I'm going to use that
same size which is sort of the second
largest die along with the third largest
diey together on some gold Mirror card
this is then going to create myself a
frame and it's going to sit absolutely
perfectly around the outside of the card
base that we've just made just sitting
over that patterned paper now I always
use a double-sided tape this is one from
Craft stash um you can see my reflection
in there but this is the double-sided
low Tac tape sorry not double-sided low
Tac tape and it just holds your dyes
down absolutely perfectly so you can see
there I'm just releasing the tape
because you can reuse it pop everything
back in the bag because I've used all of
those but inside each of these you do
get a sentiment as well so I'm going to
recut that sentiment from a scrp piece
of Mirror card that came out of the
middle of the gold frame and then all I
need to do is glue everything together
and there we have it a beautiful card
base a shape that you probably would
never be able to buy pre-made so then
let's move on to the second card
technique this one is a spinner card and
it's really good fun you can make it
with pretty much any shape of nesting
dye but I've never found nesting dyes
that are uh as unusual shape as these
but they make for really exciting shaped
Spinners so I again I'm choosing my
pattern paper first before I go on to
choose my card base
now I'm folding a piece of A4 card stock
in half and I'm overlapping that scored
Edge again just as we did with the last
one I'm going to make myself a shaped
card base too for this one I just think
it will look really fun and really
unusual really different so I'm cutting
through both layers there and with the
pattern paper I'm going to cut myself a
full piece of the largest diey a full
panel and that will go over the top and
that will kind of complete the shape so
where I've overlapped The Edge there
that won't be sh showing now with this
layer rather than just cutting the solid
I am going to cut into it in a moment
which is why I'm kind of jiggling it
about on my pattern paper just to work
out where it's best to cut from um I
didn't want to cut out the butterflies
because I knew they wouldn't be seen on
in the end result so I've s of left them
in the middle there um for later use so
just die cutting that solid panel and
you'll be able to see in a moment how we
can place that onto our card base I'm
not going to glue it down just yet for a
good reason I'll explain that in a
moment and just checking I'm going to
cut myself that into a frame and then
I'm going to cut an aperture into my
card and this is going to go through
both the pattern paper and the card base
but as I say I'm not gluing it yet so
I'm having to be really careful about
keeping those two together in the die
cutting machine this is just me going
off to my larger format die cutting
machine um placing them together really
carefully you can use your low Tac tape
as well um and cutting them both through
at the same time to make sure that the
aperture I'm cutting is in exactly the
same place both times so just releasing
everything there and there you can see
that worked absolutely
perfectly so now I'm going to cut myself
uh the next part which is going to be
another frame so using uh the a middle
siiz D to what I've used so far plus the
smaller one that I cut the aperture with
they can both go through my smaller
machine which is on my desk doing this
from a pink because there are elements
of pink in that pattern paper and you'll
see I've got the frame there beautifully
cut and it fits absolutely perfectly
this is kind of what we've just done in
a way on the first card but now for the
different part so I'm layering a piece
of pink card stock and a piece of green
pattern paper together and cutting it
with the small list of my nesting dyes
these two will go back to back in a
little while which is why I'm happy to
cut them together uh so they are going
to be the spinner element for our card
now I'm just going off here to get a
little bit of thread or cot
something really thin really fine that's
going to allow your element to spin
inside the card I've gone with white
because I've got a white card base a
little bit of glue down the back of one
of the smaller nesting dyes and then
encase that thread in with the second
one on top making sure that the threads
are in the center of both ends of that
smaller D trimming it with lots of
excess now this is the bit that gets a
little bit fiddly I went with a red
liner tape on both the top and bottom of
my card base notice I still haven't
haven't stuck my mates and layers down
yet because I want all of this to be
hidden with the mates and layers so I'm
going to lift up the sticky now what I
didn't realize is that the thread
wouldn't actually stick too well to the
red liner tape um so uh what I ended up
having to do was actually twist the
thread around that bottom part a few
times and stick it that way so that held
it in place long enough for me to then
get the top attached in the same way
threading the thread over over the top
over under over under and trimming it
once it been around a few times and then
once I glue my mat and layers over the
top that's going to secure everything in
nice and tight that's not going anywhere
so putting the first the matte on and
then the frame afterwards you could do
this with foam if you prefer but Flat's
absolutely fine and then the magic so if
you uh close your card but before you
close it twist twist twist that spinner
element All in One Direction
for as as long as you can when they open
it up you'll get this spinning motion it
will spin all the way back around this
looks fantastic with things like
butterflies now the third technique and
this one is the triple Shaker which is
such a fun um technique it's such a fun
card I love doing this for children they
you know you can do it in bright colors
I think it lends itself to bright colors
actually so I've chosen myself six
nesting dyes of this fun tag shape
gone from really quite big which is
going to basically be my card base shape
and size all the way down to quite small
I'm going to put them in pairs from each
one I'm going to cut myself eight the
largest one is going to be the base
shape so we'll see this with just the
first one and then we're going to use
the largest one and the second one in
from that from same white card stock to
cut a frame to go around this we're then
going to do that with the middle set of
nesting dyes and then we're going to do
that again with the smaller set and each
of these are going to sit on top of each
other now I'm actually saving a lot of
card stock by using the inits that I've
just cut out technically the waist um to
cut out the neck size down so this is
why I've started with the largest going
up to the or down to the smallest
because this way I don't feel like I
waste quite so much card
stock now once all my pieces are put
together I've started inking the
backgrounds of the solid bits the three
solid pieces I don't need to go all over
the background because the middle and
the Very outside of these aren't going
to be seen um I kind of forgot about
that to start with until I got to the um
last one but it's fine I tried to go
with a slightly lighter color towards
the top and a darker color towards the
bottom I've used my distress oxides but
any sort of blending inks would work um
but to be honest you're going to see
quite a small amount of this except on
the middle one I went with the colors of
sequin that I had so the flat sequins I
had a pinky red uh a mint green and a
silver so I sort of went with those
colors and spritzed it all with water
just to make sure that I've got a little
bit of distressing going on there and
then it's time to put these together so
I needed to cut myself some acetate
Windows once these were dry and I
actually did this by hand but you could
use your dyes to cut the acetate if you
wanted to um if you use your dyes you
need probably something like a metal
shim to to cut against so that the
acetate cuts through cleanly but it is
absolutely possible then with each
acetate window I glued the frame on
first keeping the frames white and then
on the reverse of that on the acetate I
put some foam tape all the way around
the
edge so just making sure there's no gaps
whatsoever for uh my sequence to drop
out some of the curves I managed to walk
the foam all the way around so releasing
the backing and then I adhered each one
of these frames to their matching
background once the ink was dry it
wouldn't stick if the ink was still wet
uh with this one I forgot to put my
sequins in but thankfully it hadn't
fully stuck down so I could open the top
up a little bit and there's my first
layer I repeated this with the uh Bluey
greeny color and also the silver as well
making sure that I was putting my
sequins in before I stuck the acetate
window and frame down onto the base
piece then it was time to layer up my
smaller ones onto the bigger ones so
there's two layers then I did the gray
and I did exactly the same sticking that
over the top onto the mint
layer and how cool does that look so
which one of those three was your
favorite I think it's probably for me
the spinner but that Shaker card looks
absolutely fantastic especially at
Christmas time if you put like a snowy
scene on top and have glitter and snow
in inside each of the shakeer layers
either way let me know in the comments
and hopefully I'll see you again very
soon for another technique video take
care everybody