2021 Toyota Hilux mods part 3, ULTIMATE UTE TUB MODS

Power Engine
34 followers
11 Video Views·Oct 24, 2022
The Hilux, they're unbreakable, aren't they?
G'day everyone. Happy New Year and happy new mods for the Hilux.
The obvious thing you can see right now, which is on the roof. We're not going to talk about that in this video and
what's behind the grill. We're not going to talk about that yet. We're going to talk about what's on the back,
what I've done to the tub. I've blacked out a couple of things which you've probably noticed already.
Now, I've also increased the storage capacity of this vehicle, made useful of some dead space.
So let's get into that right now.
As I said, most of the stuff's happening in the back here. We've got storage here,
we've got storage cases in here, which swing out. There's a lot of stuff to talk about. Down below,
there will be some skipping points so you can jump to, say, the swing away cases or this hurricane
storage case on the back or any of the liner stuff that we're going to talk about and the side steps.
There's a lot of stuff to be covered here. We're also going to talk about the weights,
heaps more stuff.
Hang on a minute. Am I wearing my shirt backwards?
Oh my god, I am too. Oh, well.
Typical bloke. Anyway, you want to skip around? Down below? Well, let's get straight into it.
We'll just clean all this out so you actually see what we're looking at.
First we're going to talk about is the tub liner. Now, there are three options you can do.
I've decided to go for this one.
So the first option is just getting a mat in here, like a heavy mat. They weigh about 20 kilos,
probably not that expensive. You can go to Bunnings to get something to protect the bottom, stop things from sliding around.
Then you've got the drop-in with the big plastic things and they also weigh a little bit. I've gone for
the liner spray-on stuff. Now, this has also added weight
and we're going to add the weight up, as you already know if you watched the previous episodes, 16 kilos.
The Line-X has added to the rear of my Hilux, to the tailgate, to the back here, the wheel arches.
We've gone all the way up to
just where the Mutemaster load leak clamps onto.
We've stopped it there because it doesn't need to go any higher than that. So the reason why I've gone for this stuff,
there's actually quite a lot of reasons. One is it's kind of a bit like grip tape,
which will also help explain to you why I've done it on the side steps as well.
It'll prevent rust, it'll prevent scratches. It also
doesn't let the noise transfer through the metal too much, like
you knock that there. Before it was quite tinny, so when things are bashing around in here,
it was making a bit of noise, so I can hear it for the cab, which isn't like a, you know, it's not that bad.
